Indicators - Page 54

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series AN2 Indicating Alarm Annunciator provides visible and audible alarms for up to eight inputs. The annunciator also has two SPDT relay outputs that can be used to initiate external alarms, buzzers, or paging devices. The Integral 24 VDC power supply can power most level, temperature, pressure, and flow switches. Audible alarm conditions can be acknowledged, reset, or silenced either via the front panel push buttons or the rear terminal block. The Series AN2 can be set to any common ISA sequences including First-Out.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series AN2 Indicating Alarm Annunciator provides visible and audible alarms for up to eight inputs. The annunciator also has two SPDT relay outputs that can be used to initiate external alarms, buzzers, or paging devices. The Integral 24 VDC power supply can power most level, temperature, pressure, and flow switches. Audible alarm conditions can be acknowledged, reset, or silenced either via the front panel push buttons or the rear terminal block. The Series AN2 can be set to any common ISA sequences including First-Out.

Manufacturer: INSIZE Brand: INSIZE Model: 2112-501E

Electronic indicator, 2"/50.8mm, resolution 00005" 0/001mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-592B

1 In/25.4, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 3/8" stem, Flat Back, With SPC Data Output, Calculation Type.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-596B

2 in/50.8mm, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Calculation Type.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-562ACAL

The calibrated Mitutoyo 543-562ACAL Absolute Digimatic electronic indicator gauge, ID-H series, is for measuring short linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 1.2" (0 to 30.4mm), a selectable resolution of 0.00005/0.00002/0.0001", or 0.0005/0.001mm, and an accuracy of + or - 0.00006" (0.0015mm). The backlit LCD readout displays measurements in inches or metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set. It has an analog bar indicator that shows lower and upper limit-approaching. This model is Ingress Protection certified IP30 for protection against objects larger than 2.5mm. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.Additional functions for this indicator include origin set, preset, zero set, maximum/minimum value hold, runout measurement, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors and ensure accurate measurements. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The measuring force is 2.0 Newtons (N) or less. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records. It also supports RS-232 data input and output for remote control (using RS-232C cables and a remote controller, sold separatel...

Manufacturer: Starrett Brand: Starrett Model: PT05472

Manufacturer: HFS Brand: HFS

Dial Size: 2" Dial Size (Crimped Casing) Accuracy: +/- 4/3/4% Scale: Dual Scale - PSI / Bar Movement: Copper Alloy Bourdon Tube: Copper Alloy Window: Glass Case: Steel case for protection in harsh environments Connection: Copper Alloy Lower Mount; 1/4" NPT (for 2" dial) Normal Ambient Temp.: -4F to +140F (-20C to +60C)

Manufacturer: Starrett Brand: Starrett Model: PT05473

Manufacturer: Flexbar Brand: Flexbar

Standard indicator Stands. Quality Made, Large Size Stands Mounted on Your Choice of: C-Clamp, Disc Magnet, or On/off Mag Base. Available With or Without Fine Adjustor Rod. Stand Specifications: Lug Back Holder. Accepts All AGD Dial indicators, Stems, etc. Accepts Dial-Test indicators 3/8" and 5/32" Dia. Rugged Locking Knobs - Scriber included. Adjusts in both Horizontal and Vertical planes. Main Post: .470 Dia. x 7" Long. Secondary Post: .385 Dia. x 6" Long. Model No. 18008, Holding Rod With Fine Adjustor. includes Lug Back Adaptor. Post is .385" Diameter X 6" Long.