|
|
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $147.54 28% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Black
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Black
|
The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...
-
4.6 of 5.0 with 45 Reviews
SALE PRICE: $148.65 15% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3600-5
Manufacturer: Starrett
Brand: Starrett
Model: 3600-5
Electronic Indicators have simple, powerful, easy-to-use functions, all at an attractive price. Versions are available for inch/metric and metric only.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $149.99
Manufacturer: T&O
Brand: Toto
Manufacturer: T&O
Brand: Toto
(6) Analog resolutions and automatic switch-over. Absolute and incremental measurement conversion. Direct metric/inch conversion. Tolerance set (permitting classification measurement). Origin data recall for absolute measurement. RS232 data output.
-
4.6 of 5.0 with 41 Reviews
SALE PRICE: $151.40 15% OFF
Manufacturer: Fowler
Brand: Fowler
Model: X-Test
Manufacturer: Fowler
Brand: Fowler
Model: X-Test
X-Test 1-1/2 Diameter Indicator to 3/8 Contact point case Contact point wrench Complete in Shop Hardened case Features: Jeweled movement Revolution counter Easy-to-read tilted dial Automatic reversal 210 Swivel arc 5/32 stem Tungsten carbide point: .080 Range: .060 inch model
-
4.6 of 5.0 with 20 Reviews
SALE PRICE: $153.70 1% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Includes G clamp Tool post base and vertical rod Swinging arm Ball anvil 1 2" anvil Thumb clamp 11 32" standard anvil Universal Test Set is simple, reliable, easy to use and eliminates checking problems Back plunger indicator is fully jeweled.
-
4.6 of 5.0 with 17 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 3417S
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 3417S
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.6 of 5.0 with 21 Reviews
SALE PRICE: $158.49 1% OFF
Manufacturer: TECLOCK
Brand: TECLOCK
Manufacturer: TECLOCK
Brand: TECLOCK
Contact point is hardened ground and chrome plated. Lug back with 1/4" hole is integral with the case. Revolution counter included on indicators.Specifications:"Dial Reading 0-100
Indicator Range .001""
Dial Color Black
Graduation 2""
Dial Diameter 2"
-
4.6 of 5.0 with 17 Reviews
SALE PRICE: $159.80 21% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Magnetic Base features: 85 lb. pull Fine adjustment V-bottom Magnetic Indicator Back features: Use for positioning the indicator on most metal surfaces Protective coating Indi-X Blue Indicator features: Direct Inch/Metric conversion 1 /25mm Auto off feature 2-1/4 dial face Lugback and 3/8 stem mountings Resolution: .0005 /.01mm Tolerance indicators Absolute/incremental reading Floating zero Carbide tipped point w/4/48 thread
-
4.6 of 5.0 with 9 Reviews
SALE PRICE: $160.00 1% OFF
Manufacturer: Brown & Sharpe
Brand: Brown & Sharpe
Model: 599-7031-5
Manufacturer: Brown & Sharpe
Brand: Brown & Sharpe
Model: 599-7031-5
Brown & Sharpe BesTest 599-7031-5 .0005" .030" Dial Test Indicator - Brand New
-
4.6 of 5.0 with 5 Reviews
SALE PRICE: $163.37 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-442T-06
Color: Black
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-442T-06
Color: Black
|
The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (0.039", 0.079", and 0.118" diameter), a 4mm diameter stem, two stems (0.157" and 3/8" diameter), a knurled clamp ring, a swivel clamp, a 4 inch holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial i...
|
|