|
|
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $186.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-282GT
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-282GT
Color: White
Measuring force: 0.3N or less, Length: 20mm. It is anti-magnet and jeweled bearing type. Vertical type. Full set includes Indicator, 0.079" Diameter Carbide Contact Point, Knurled Clamp Ring, and 3/8" Diameter Stem, a Swivel Clamp (part number 900322) for 3/8" Diameter dovetail, Inch Holding Bar (900306), two additional Carbide Contact Points (0.039" and 0.118" Diameter) as well as one additional Stem (0.157" Diameter).
-
4.5 of 5.0 with 8 Reviews
SALE PRICE: $188.59 18% OFF
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 12I
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 12I
Approximate  57mm diameter with soft-yellow tint. Approximate 2.250in diameter with soft-green tint. These indicators are normally furnished with continuous dial (with R. C. ) or + on right balance dial (w/o R. C. ), lug back, .18" by .250" long contact and tolerance hands.
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $199.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-409T
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-409T
Color: Yellow
Measuring force: 0.3N or less, Length: 14.7mm. It is Anti-magnet type and Jeweled bearing type. Full Set includes Indicator, Knurled Clamp Ring, ø8mm Stem (part number 902804) and ø2mm Carbide Contact Point, as well as ø1mm Carbide Contact Point and ø3mm Carbide Contact Point, ø4mm Stem (part number 190318), 100mm Length Holding Bar (part number 900209) and Swivel Clamp ø4mm, ø8mm, Dovetail (part number 900321).
-
4.5 of 5.0 with 22 Reviews
SALE PRICE: $208.02 28% OFF
Manufacturer: Avery Weigh-Tronix, LLC
Brand: Brecknell
Model: MODEL SBI-505
Manufacturer: Avery Weigh-Tronix, LLC
Brand: Brecknell
Model: MODEL SBI-505
The Brecknell SBI-505 meets all the demands for a high quality, easy to use indicator at a competitive price. Construction: Painted mild steel with stainless steel desk stand or wall mount stand. Packaging Contents: Indicator, stand, power supply, manual, RS-232 connector, lead seal, load cell connector and knobs
-
4.5 of 5.0 with 36 Reviews
SALE PRICE: $215.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2900S-73
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2900S-73
Color: Yellow
An unique shock-proof mechanism is incorporated, providing improved immunity to shock due to sudden spindle retraction caused by high impact. Provided with an improved resistance to shop floor contaminants such as water and dust. Due to the spindle bushing being offset from the stem, spindle movement will not be hindered or jammed when clamping along the stem. A pair of limit hands are provided for quick and easy tolerance judgment (GO/ +/- NG). The crystal is hard coated for durability and scratch resistance.
-
4.5 of 5.0 with 9 Reviews
SALE PRICE: $216.95 13% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Black
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Black
|
The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...
-
4.5 of 5.0 with 22 Reviews
SALE PRICE: $255.50 15% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 709BZ
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 709BZ
Color: White
|
The Starrett dial test indicator without attachments has a Red, black, or white face, and inch measurements. It has a narrow body for use in hard-to-reach areas, and has a choice of red, white, or black dial face for use in a variety of lighting settings. The carbide ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation with automatic reversal helps prevent plus or minus confusion. The ball-bearing lever system with measuring insert swivels through to 210 degrees. The dial has an angled face and three dovetail mounts, and can be mounted horizontally or vertically from the front, top, or back of the indicator. The indicator has a satin chrome finish for durability, and a gear-driven, jeweled movement for accuracy. The contact points are frictionally adjustable and replaceable. This dial test indicator meets or exceeds accuracy and performance requirements of national and international standards, and is traceable to the United States National Institutes of Standards and Technology (NIST). Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of...
-
4.5 of 5.0 with 33 Reviews
SALE PRICE: $272.42 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-075-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-075-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.5 of 5.0 with 42 Reviews
SALE PRICE: $318.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-793CAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-793CAL
|
The calibrated Mitutoyo 543-793CAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0001" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0001" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with lug backData outputYesDimensions103.9...
-
4.5 of 5.0 with 30 Reviews
SALE PRICE: $321.16 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Manufacturer: Mitutoyo
Brand: Mitutoyo
Technical Specification Item Electronic Digital Indicator Series 543 Resolution .0005/0.01mm Accuracy .0008 Range 0.500/12.7mm Long Form Calibration Certificate Yes Features With SPC Data Output Includes Certificate Of Calibration Traceable To NIST, Battery This listing is for each.
|
|