|
|
-
4.4 of 5.0 with 10 Reviews
SALE PRICE: $134.99 1% OFF
Manufacturer: MULTI-BRAND
Brand: Multi
Manufacturer: MULTI-BRAND
Brand: Multi
Brown & Sharpe 1" Dial Indicator & TTC Magnetic Base & Point Set Graduation .001" Type of Reading Inch Dial Color Black
-
4.4 of 5.0 with 12 Reviews
SALE PRICE: $135.00
Manufacturer: Q-Mark Manufacturing Inc
Brand: Q-Mark
Manufacturer: Q-Mark Manufacturing Inc
Brand: Q-Mark
M2 stylus with 0.3 mm ruby ball. Stainless steel base, 3 mm diameter x 5 mm long. Tapered carbide shaft with 1.0 mm major diameter and 0.20 mm minor diameter. Overall stylus length is 23.0 mm. Stylus weight is 0.36 gram.
-
4.4 of 5.0 with 40 Reviews
SALE PRICE: $139.95 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2805SB-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2805SB-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.4 of 5.0 with 32 Reviews
SALE PRICE: $149.87 5% OFF
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4303950
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4303950
Mahr Federal 801 H MarTest 4303250, 0.0005" x ±0.015" Horizontal Test Indicator, 0-15-0, 1.1" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.
-
4.4 of 5.0 with 43 Reviews
SALE PRICE: $158.00
Manufacturer: Brown & Sharpe
Brand: Brown & Sharpe
Model: 599-7030-5
Manufacturer: Brown & Sharpe
Brand: Brown & Sharpe
Model: 599-7030-5
Brown & Sharpe BesTest 599-7030-5 .0005" .030" Dial Test Indicator - Brand New
-
4.4 of 5.0 with 32 Reviews
SALE PRICE: $159.00 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4400-0112
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4400-0112
HHIP long travel digital electronic indica features true inch/mm conversion. Zero reset button allows absolute or comparative style measurements. Easy adjusting for standard or reverse reading. Button battery SR 44,1.55 V supplied with fitted case.
-
4.4 of 5.0 with 50 Reviews
SALE PRICE: $165.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2905SB-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2905SB-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.4 of 5.0 with 10 Reviews
SALE PRICE: $175.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-571
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-571
|
The Mitutoyo 543-571 Absolute Digimatic electronic indicator gauge, ID-N body, is for measuring short, linear distances in harsh workshop conditions. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.0008". The LCD displays in both inches and metric units, and can be rotated 180 degrees for taking measurements from different directions. The body is 35mm wide and can be used in locations where space is restricted. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP66 for protection against dust and water jets.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions include zero set, preset, direction switching, tolerance judgment, hold, and alerts for low voltage, counting value composition error, overflow error, and tolerance limit setting error. This indicator gauge has a measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or - 0.0008"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, face can be rotated 180 degreesData outputYesDimensions128.5 x 35 x 25mm (H x W x D)Shipping weight1.5lb.StandardsIP66Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies ...
-
4.4 of 5.0 with 39 Reviews
SALE PRICE: $184.95 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Material hardness full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tole - rance marks. M2,5 mounting thread for the measuring insert. Included in scope of supply: mounted insert with a 3mm diameter steel ball tip. Comes in cardboard box. Identification number. Inspection report with a declaration of conformity. Dial locking knob. 0.5" Revolution.
-
4.4 of 5.0 with 45 Reviews
SALE PRICE: $201.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-455E
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-455E
Color: Yellow
|
The Mitutoyo 513 series dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The vertical face is perpendicular to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, non-magnetic pointer and contact point for secure operation in magnetic environments, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the d...
|
|