Indicators - Page 89

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus, 0.3 mm carbide ball, stepped carbide shaft, 3.0 mm diameter x 5.0 mm long stainless steel base, 19.0 mm overall stylus length. Major shaft diameter is 1.0 mm. Intermediate shaft diameter is 0.50 mm. Minor shaft diameter is 0.20 mm. Stylus weight is 0.34 gram.

Manufacturer: Mahr Brand: Mahr Federal Model: 4307200

Mahr Federal 800 SG MarTest 4307200, 0.01mm x ±0.4mmStandard Test Indicator, 0-40-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: Starrett Brand: Starrett Model: 25-341J Color: White

These indicators have a shockless, hardened steel gear train and jewel bearings, except where noted. They are furnished with a lug-on-center back. Antimagnetic mechanism is optional. Special nonshock mechanism is available.

Manufacturer: Flexbar Brand: Flexbar

Upgrade your Milling Machine or Lathe to Digital reading. This digimatic scale is designed specifically for convenient display of any axis of a machine tool movement. Precise depth control floating zero allows you to set "zero" anywhere within operating range with a push of a button.

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M4 stylus for Blum probe systems. Db = 6.0 mm ruby, L1 = 50.0 mm to ball center, L2 = 30.5 mm to ball center. Compare to Blum P03.8000-010.050.06.

Manufacturer: Starrett Brand: Starrett Model: 196MB5 Color: Yellow

While there is a need for indicators with finer graduations. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2960T Color: white

0.01 mm, 1 mm/1.27 mm Back Plunger Dial Indicator, 50-0-50, Series 2, 8 mm stem, One Rev, Shockproof.

Manufacturer: Advanced Systems & Designs Brand: Advanced Systems & Designs

Advanced Systems & Designs SmartCable USB Keyboard single gage interface connects a standard Mitytoyo gages (570/543/575/572) directly to a computer. No software wedges or additional cables required!! The output of the SmartCable Keyboard is a standard USB 2.0 keyboard signal. Connecting the SmartCable Keyboard to a computer will allow the SmartCable to be identified as a keyboard device that can send data to any Microsoft Windows application. The SmartCable Keyboard will make the gage readings appear as if they were typed in using a standard keyboard. If you want to collect data into a Microsoft Excel spreadsheet, simply select the cell where you want the data to appear. Readings can be triggered by any of the following: • Pressing the push button on the SmartCable Keyboard • Depressing a connected footswitch (not included) • Pressing the send button on the gage (if it has one) The SmartCable Keyboard can be easily configured to output data in different modes, such as CR, TAB, up, down, left , right and continuous reading. The output mode is selected by adjusting the rotary switch on the SmartCable Keyboard. To access the rotary switch, remove the top cover by loosening two Phillips screws. A detailed operation manual is included with each SmartCable Keyboard. Ships from Ohio, can ship only within the United States.

Manufacturer: USA Technologies Brand: USA Technologies Model: VM150

VendingMiser VM150 with PIR (Passive Infra-Red) Occupancy Sensor. Wall-mounted for indoor use. Use in locations where vending machine placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.