|
|
-
4.3 of 5.0 with 48 Reviews
SALE PRICE: $199.95 47% OFF
Manufacturer: iGaging
Brand: iGaging
Model: 35-700-50
Manufacturer: iGaging
Brand: iGaging
Model: 35-700-50
Igaging absolute technology indicator the igaging digital electronic indicator with absolute encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Indicator face can be rotated up to 330°. features: SPC/USB data port indicator face can be rotated up to 330° absolute encoder technology IP54 protection read and convert inch/mm display change measuring direction - positive up or positive down origin set preset value tolerance function zero/ABS - switch between incremental and absolute measuring Super large LCD display shank diameter: 3/8" Carbide tip 4-48 threaded tip 2 years warranty specifications: range: 2"/50mm resolution: 0.00005"/0.001mm accuracy: 0.00023" repeatability: 0.00005"/0.001mm battery: 1x CR2032 (2 included).
-
4.3 of 5.0 with 6 Reviews
SALE PRICE: $204.78 7% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 649-5
Manufacturer: Starrett
Brand: Starrett
Model: 649-5
The Starrett 649 Series Spindle Square offers accuracy, convenience and significant time saving with the common shop task of trimming the head of a vertical milling machine. This must be done regularly to ensure squareness and perpendicularity between the spindle and work surface. The spindle square is easier to use and more precise than the traditional method of trimming with a dial test indicator.
-
4.3 of 5.0 with 16 Reviews
SALE PRICE: $215.00 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-562-253-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-562-253-0
|
The Fowler 52-562-253 Girod horizontal test indicator has a 1" diameter balanced dial, a 0.008" measuring range, 0.0001" graduations, three carbide contact points, a 210-degree swivel range, jeweled bearings in an isolated shockproof assembly, and a one-piece anti-magnetic housing, and is designed to measure surface variations in narrow or recessed areas. The 0-4-0 balanced dial has a total measuring range of 0.008" with 0.0001" graduations. An adjustable bezel and dial sets the zeros the reading at any location. The auto-reverse mechanism has adjustable ball-bearings to provide ultra-smooth lever action. Seven fine, jeweled bearings are housed in an isolated, shockproof assembly that is separate from the outer body to provide protection from the influence of external pressure. Three 0.5" interchangeable carbide contact points have 0.040", 0.080", and 0.120" ball diameters for use on a range of surfaces, and the contact point swivels 210 degrees to reach a variety of locations. Carbide contact points provide durability for surfaces with a hardness rating below that of carbide. Three separate dovetail mounts allow the indicator to be mounted from the top, front, and back of the indicator and two dovetail clamping stems with 7/32" and 1/4" diameter provide a range of clamping options. Anti-magnetic, one-piece body construction is chrome-plated to resist corrosion. The set includes a horizontal-face dial test indicator with a balanced dial, three 0.5" long contact points with one each 0.040", 0.80", and 0.120" diameter carbide tips, one 7/32" diameter dovetail clamping stem, one 1/4" diameter dovetail clamping stem, and a fitted storage case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ...
-
4.3 of 5.0 with 40 Reviews
SALE PRICE: $240.00 1% OFF
Manufacturer: Fisso
Brand: Flexbar
Manufacturer: Fisso
Brand: Flexbar
Strato Line 3D Articulated Arms for Gauges, Without Fine Adjustment and Base. Model No. 14832, Strato Line 3D Articulated Arms Only. Approx. radius of movement mm/in.: 130/5.15" Approx. Carrying Capacity Lbs.: 6
-
4.3 of 5.0 with 42 Reviews
SALE PRICE: $255.89 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-580-025-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-580-025-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.3 of 5.0 with 37 Reviews
SALE PRICE: $268.99 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
|
The Brown & Sharpe Bestest-13 series dial test indicator set has a yellow face and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow face dial face rotates. The white dial and contrasting black hand help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a dial test indicator, a 0.080" (2mm) carbide contact point, a rectangular bar, a swivel clamp, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurem...
-
4.3 of 5.0 with 2 Reviews
SALE PRICE: $270.23 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Accessory for Tesa Digico 1 and Digico 2 electronic indicator, aslo with power outlet.
-
4.3 of 5.0 with 27 Reviews
SALE PRICE: $272.99
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-692B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-692B
|
Mitutoyo 543 series LCD Absolute Digimatic Indicator ID-S displays inch/metric measurements in a choice of resolution and 0.5"/12.7mm measuring range. The indicator is automatically set to zero when it is turned on for measuring in either or both directions (plus or minus), and has a 0.375" diameter stem, a steel ball contact point with a 4-48 UNF (Unified National Fine) thread, and a choice of flat or lug back. The LCD display is automatically set to zero when powered on at the current spindle location for measuring in either or both directions, and has a sealed housing that is Ingress Protection (IP) certified IP42 for protection against dust and water. An audible alarm indicates low battery, scale contaminations, and data composition errors. The indicator has SPC (statistical process control) data output for data analysis (requires cable, not included). The indicator is powered by an SR44 battery (included).SpecificationsDial typeLCDDial readingInch and metric, selectableRange0.5"/12.7mmStem0.375"Contact point materialSteelContact point thread4-48 UNFMountingFlat or lug backData formatSPCData outputRS-232PowerSR44 battery Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a c...
-
4.3 of 5.0 with 28 Reviews
SALE PRICE: $283.56 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-474B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-474B
|
The Mitutoyo 543-474B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 25.4mm, a resolution of 0.01mm, and an accuracy of + or - 0.03mm. The LCD readout displays measurements in metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. It has an 8mm diameter stem and an M2.5X0.45 contact point thread mount. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 1.8 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR-44 battery and lifting lever. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 25.4mmResolution0.01mmAccuracy+ or - 0.003mm with quantizing error of 1 countMeasuring force1.8N or lessStemM2.5X0.45 contact point thread mount with 8mm diameter stemFaceBacklit LCD digital in metric units, green or red lighting displays go/no-go judgment, and rotates 330 degrees, with flat backData outputYesDimensions168.5 x 59 x 42.5mm (H x W x D)Shipping weight1lb.StandardsIP42Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the ...
-
4.3 of 5.0 with 10 Reviews
SALE PRICE: $299.47 1% OFF
Manufacturer: Fowler
Brand: Fowler
Model: S_Dial One
Manufacturer: Fowler
Brand: Fowler
Model: S_Dial One
Features IP67 protection even with the cable Robust Construction Removable lifting lever included on all models Menu customizable with free software Direct inch/metric conversion High contrast LCD display Lugback included Applications Made for the Machine Shop
|
|