Indicators - Page 96

Manufacturer: ASIMETO Brand: ASIMETO Model: 501-73-5

Dial Test, Vertical Dial Test Indicators & Sets, ASIMETO,

Manufacturer: Miller Supply Inc Brand: Miller Supply Inc

Drop a card into package with a desiccant and seal. Open at receiving end and check card. Color change from blue to pink identifies the presence of potentially damaging humidity levels.

Manufacturer: OMRON Brand: Omron

[Display contents]Decimal [Display color]Red [Type]Negative Ratings [Rated power supply]Wide range from 12 to 24 VDC [Allowable voltage fluctuation range]90% to 110% of rated voltage [Current consumption(per Display)]Red LED60 mA max.(at 24 VDC),100 mA max.(at 12 VDC) Green LED80 mA max.(at 24 VDC),140 mA max.(at 12 VDC) [Input level]High4 V to power supply voltage Low0 to 1.5 V [Ambient temperature]Operating-10 to 55 deg.(C)(with no icing) Storage-25 to 70 deg.(C)(with no icing) [Ambient humidity]Operating35% to 85%(with no condensation)

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2971 Color: Yellow

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1411S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1571S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Fisso Brand: Flexbar

Anyform Magnetic Base. Adapts To Any Shape, Any Contour Designed and Manufactured in U.S.A., Pat. Pend. 70 steel segments independently align and attach themselves firmly to uneven surfaces. Single cam lock mechanism locks segments in Adapted (finely adjustable) form.

Manufacturer: Flexbar Brand: Flexbar

On/off Magnetic Bases With removable flanges so custom rigging Can be Made Without ruining Magnetic Cores. Features: Heavy-Duty Housing Permanent Magnets M8 x 1.25mm Mounting Thread Located Under Removable Flange Model No. 11001, On/Off Magnetic Base with Flat Bottom. 180 lbs. of magnetic pull.

Manufacturer: HHIP Brand: HHIP

0-0.06" Swiss Style Dial Test Indicator ~ .0005" graduation. ~ Reading is 0-15-0. ~ Range is 0-.060". ~ Swiss style horizontal dial test indicator. ~ Automatic reversal. ~ Jeweled movement. ~ Easy-to-read tilted dial. ~ 210 degree swivel arc. ~ Dial diameter is 1.185". ~ .080" carbide contact point. ~ Very large measuring range. ~ 5/32" swivel stem. ~ Revolution counter. ~ 5/32" & 3/8" stems are included.

Manufacturer: Flexbar Brand: Flexbar

Flexbars On Weighted Bases . Made In U.S.A. Instant Positioning - Instant Locking Universal Holder/Positioners For All Agd Indicators And Electronic Sensors (Lug Backs Too!). The Heavy Duty Flexbar Is Completely Flexible; Lets You Reach Over, Under, Around, Instantly And Surely. Elimination Of The Large Assortment Of Rods, Swivels, Clamps And Other Hardware Necessary To Reach And Measure In Obstructed Areas. Cuts Set-Up Time As Much As 75% To 90%. Flexbar Sets And Locks With A Simple Twist Of The Lever. Top Mounting Clamp: (Telescopic Action) Grips Objects From .125" Up To .510" Diameter. Cable And Swaged Fittings Are Stainless Aircraft And Mil Spec Grade. Locked By Tensioning Of Cable, Incredible Rigidity Is Achieved By This Design. (No Movement Once Locked). Cam Action Locking. Now, Universal And Off-The-Post Style Flexbars Are Available Mounted On Heavy Duty 6" Dia. Weighted Base. Ideally Suited For Benchtop And Laboratory Uses. Model No. 18046-Wb, Flexbar Off-The-Post On Weighted Base.