Indicators - Page 99

Manufacturer: Mitutoyo Brand: Mitutoyo

Spindle rack, pinions and pivots of hardened stainless steel to insure long wear and perfect accuracy.

Manufacturer: Accurate Manufacturing Brand: Accurate Manufacturing

The Zero-Set fits all dovetail equipped indicators, and is used to check the alignment of the centers of round material in relation to the cutting head. Speeds up set-up operations tremendously! Manufactured with 1/4", 3/8", and 1/2" spindle post and has an effective measuring range of 3/8" to 10". Quick adjustments and line adjustment controls. Model AA-9860M is Made by Accurate Manufacturing and will accept the zero-set universal attachment - recently redesigned for even greater precision! Indicator is not included.

Manufacturer: Westward Brand: Westward

Indicator/Magnetic Base Set, Magnetic Pull 85 Lb, Base Size 2 x 2 11/32 x 1 13/16 In, V-Base, Fine Adjust, Rod Dia 2/5 In, Upright Post Dia 0.472 In, Thread Size M8, Switch Type On/Off Lever, Step Type V, Holds Base To Round Surfaces, Snug Swivel Post, Allows Indicator Adjustment Up/Down/Vertical Angle/Complete Circle and any Distance from Base along Gage Holding Rod, (2) 3/8 Inch Diameter Holes, Grips Lug Back or 3/8 Inch Stem, Includes 4KU81 Indicator and 4KU72 Magnetic Base

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-002-0

The Fowler 54-860 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. An ABS (acrylonitrile butadiene styrene) housing protects electronic components against impact and provides electrical insulation. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring range0 to 1"/0 to 25mmResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleFrictionData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manu...

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M3 stylus, 5.0 mm diameter x 9.0 mm long titanium base, 2.0 mm diameter Therm-X graphite stem, 3.0 mm diameter silicon nitride ball. Overall stylus length is 50.0 mm. Stylus weight is 0.69 gram. Compare to Zeiss 626103-0301-050.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-444-1 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-454E Color: Yellow

The Mitutoyo 513 series dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The vertical face is perpendicular to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, non-magnetic pointer and contact point for secure operation in magnetic environments, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the d...

Manufacturer: Fowler Brand: Fowler

Includes adjustable tolerance limit markers Features Revolution counter hand. Supplied with lug backs positioned through 90 increments. Spindle rack cases forged brass, satin-chromed; gear wheels hard brass. Pinions of silver steel, hardened tempered and burnished on pivots; lapped on teeth. Microfine graduations in black for continuous readings and red for balanced readings. Available in metric graduations. Movement mounted independently from case on rigid supporting plate, ensuring perfect and permanent alignment. Extra long springs for uniform pressure through entire travel of spindle. Bezel knurled; easily adjusted thru 360 . Meets AGD specifications. Group II & III gages - measuring pressure approximately 2 oz. except .0001" (.002mm) which is 5 oz. Price includes fitted carton box.

Manufacturer: HHIP Brand: TECLOCK Model: 4409-1002

0-2" Tecklock Dial Indicator .001 Graduation 0-100 Reading 2-3/16" Diameter Group 2 Type Indicator Easy-to-read graduations. Hard saTiN- chrome finish. Spindle rack, pinions and gear trains are Superior quality to ensure longevity. Conforms to AGD specifications. Meets or exceeds applicable federal specifications. Revolution counter. Lug back.

Manufacturer: HHIP Brand: TECLOCK Model: 4409-1002

0-2" Tecklock Dial Indicator .001 Graduation 0-100 Reading 2-3/16" Diameter Group 2 Type Indicator Easy-to-read graduations. Hard saTiN- chrome finish. Spindle rack, pinions and gear trains are Superior quality to ensure longevity. Conforms to AGD specifications. Meets or exceeds applicable federal specifications. Revolution counter. Lug back.