Insulation Resistance Meters - Page 14

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3023

The Kyoritsu digital megohmmeter is an auto-ranging insulation tester with four test voltages for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400Ω and AC and DC voltage to 600V, lighting a warning indicator and sounding a buzzer when a live circuit is detected. The comparator function allows a reference resistance value to be set, lights a "pass" or "fail" indicator for subsequent readings, and triggers a buzzer when a reading exceeds the reference value. Up to 99 insulation resistance readings can be stored in the unit's internal memory. When measurement is complete and the range selector is switched off, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter has an LCD with a backlight for visibility in low light that automatically turns off after 60 seconds. The display shows readings numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.This auto-ranging meter automatically selects the appropriate operating range for measurements. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It automatically turns off after 15 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. It comes with a set of test leads with a remote control switch for initiating a test, a test bar, a safety alligator clip, an extension prod, a test lead storage pouch, six AA batteries, and instructions. SpecificationsMaximum insulation resistance measured2,000MΩTest voltagesB009TAL7K...

Manufacturer: Yokogawa Electric Corporation Brand: Yokogawa Model: MY40-01

The Yokogawa MY40-01 digital megohmmeter is an insulation tester with four test voltages—125, 250, 500, and 1,000V—for measuring insulation resistance to 2,000 megohms to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400Ω and AC voltage to 600V, lighting a warning indicator and sounding a buzzer when a voltage greater than 40V is detected. The meter sounds a continuity buzzer at less than 40Ω to confirm that the circuit conducts electricity. A comparator function allows a reference value to be set, compares subsequent readings to that value, and triggers a buzzer and lights a "low" indicator when readings fall below the set value. The memory function stores up to 20 readings. To aid documentation of readings, the data hold function keeps the most recent reading on the display for five seconds after the measure switch is turned off. When measurement is complete and the measure switch is turned off, residual voltage is automatically discharged from the circuit under test. The measure switch can be locked for extended measurement sessions. The meter has a 4,000-count LCD that shows readings numerically and in a bar graph, and has a backlight for visibility in low light. It automatically turns off after ten minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It comes with a line probe, an earth probe, a display cover, a shoulder strap, four AA batteries, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsMaximum insulation resistan...

Manufacturer: Extech Instruments Brand: Extech Model: 380395

Auto power off, Lo Ωfunction for testing connections, Lock Power On Function for hands-free operation, Data Hold to freeze displayed reading, Complete with heavy duty test leads, alligator clip, hanging strap, protective carrying case, and 6 x AA batteries.

Manufacturer: Amprobe Brand: Amprobe Model: AMC-4

The Amprobe AMC-4 hand cranked insulation tester is an analog meter to measure insulation resistance on wires, cables, transformers, and electrical motors. The unit measures insulation resistance from 0 to 100 Megaohms using a 500V direct current (DC) test voltage and 0 to 500 Megaohms with 1,000V DC test voltage. The test voltage is produced by a hand-cranked constant voltage generator, so the unit never needs batteries. A guard terminal prevents surface leakage from affecting the instrument's readings. The AMC-4 is designed for use by electricians and electrical contractors. Specifications Power supply Hand-cranked constant voltage generator Insulation resistance range with 500V DC test voltage 0 to 100 Megaohms Insulation resistance range with 1,000V DC test voltage 0 to 500 Megaohms Weight (including batteries) 2.5 lb./1.13kg Dimensions 7 x 4 x 3.6 inches/177.8 x 101.6 x 92.1mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the propert...

Manufacturer: Albedo Telecom Inc. Brand: Albedo Metro.Iso.M1

Metro.ISO.M1 Hand-held. Albedo Metro.ISO Insulation Measuring multimeter. Test Insulation-Resistance with selection of 100, 250 and 500V, Isolation up to 10GOhms, Capacitance, AC / DC Voltage, Fault location and Selectable measuring lead pairs. Includes internal battery pack, lead pairs, AC/DC adapter and transportation bag.

Manufacturer: Megger Brand: Megger Model: 242104-2-16

The Megger 242104-2 series duplex test lead with C-clamp is for use with Megger 247100, 247101, DLRO200, and DLRO600 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements. The lead has a maximum test current input of 100 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 4" (10 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardiza...

Manufacturer: COLE-PARMER Brand: Megger

These insulation resistance testers are the recognized standard in the industry. They have proven so reliable and popular that they have been reintroduced, generation after generation, with circuitry upgraded to complement the familiar design. True analog movement remains a popular feature, especially where diagnosis is involved. The trained eye can get much more than just a MÙ reading from an analog meter. Similarly, a guard terminal adds a valuable extra dimension when more than just pass/fail testing is desired. With commonly four test voltages, extra range to the resistance measurements, continuity and kÙ functions for proofing and troubleshooting, they address the widest range of applications and are the most general models. FEATURES BD422101The most basic hand-cranked tester. Dating back to its initial version, this has the longest history and is the most popular model ever on the market. The dependability of this self-contained generator remains unchallenged BD422103 A dual source version, combining line operation and hand-crank, ease and dependability BD422104 Operates on convenient throwaway batteries BD422105 Battery rechargeable by internal charger and powered by 120 volt ac, 50/60 Hz line BD422106 A lower-voltage, lower-range version of the BD422101. With a 50 V output selection, it is the model of choice for testing sensitive equipment, subassemblies, and components BD422107 High Resistance Model - Offering a greater range (by a power of 10). This is the instrument of choice where accurate readings of exceptionally high resistance values are preferred over pass/fail infinity readings. This capability makes this unit especially suited for long-term trending of new equipment where readings will commence from factory-fresh values BD422109 Digital Autoranging Model - For those who prefer digital, this model includes all of the Megger series standard capabilities Model 210170 - High Resistance Model - Offers a greater range (by a power o

Manufacturer: Applent Brand: Applent

Features:High brightness, ultra clear four-color VFD Display.Auto Zero-Adjust for each rangeComparator Function: Stores up to 30 sets of measurement conditions HI/IN/LOW/GD/NG VFD Show or HANDLER out.Four-terminal resistance measurement.Build-in RS-232C, Handler(EXT-I/O) InterfaceBeeper and brightness can be adjusted.Internal,Manual,External and Remote Trigger.USB Interface(Optional).SCPI compatible command sets.Application:Pure resistancethe resistance of motor and transformerwindingsEnamel-insulated wire resistance.relay/switch connector contactsPCB patternsSpecifications:Parameter:DC resistanceAccuracy: 0.01%Measurement RangeMeasurement Range: 0.1μΩ ~ 110MΩSignal Source:Current range: 1μA~1ARange:Automatic and manual with 11 rangesSpeed:150 times/second, 10 times/second, 2 times/secondResult Display:Show, ΔABS,Δ% and sorting resultMax reading: 200000Correction:Open & short resetComparator:30 groups record, NG-LO, GD-IN, NG-HI display and output, adjustable beep and volumTrigger: In, manual, external and remoteConfiguration Interface:RS232C, Handler interface (PLC interface)Test terminal:4 terminal shielding ( 2 check terminal and 2 driving terminal) and external shielding ground sectionPower Supply:Voltage: 198V AC - 240V AC;Frequency: 50Hz ;Power: Max 15VA 110V,60Hz is also avaliableAccessories:ATL501:Kelvin clip ATL801:232 communication cable

Manufacturer: VICTOR Brand: Victor Model: VC60B+

Introduction:The whole instrument is stylish and superior grade in appearance and highly stable in performance. It can be operated by both hands through using a shoulder strap. It is most suitable for the needs of insulation resistance check, such as electric, cable, electrical and mechanical equipment, telecommunication equipment and electrical facilities.Specification:Model: VC60B?Measuring Voltage: 50V±10% 500V±10% 1000V±10%Insulation Range: 0.1M?~20 M? 0.1M?~50 M? 0.1M?~100 M? 20M?~500 M? 50M?~1000 M? 100M?~2000 M?Accuracy: ±(4%+2)Current of Short Circuit: 1.8mA 1.8mA 1.6mAMedian Resistance: 2M? 2M? 5M?Terminal Position: L & EVoltage Test(AC750V) Accuracy: ±(1.0% of reading + 6 digits)Input Impendance: 1M?Frequency Response: (50~200) HzTerminal Position: ACV & GAlarm Function Red indicator light is illuminatedLow Battery Indication: YesOver Load Indication: YesUnit Symbol Display: YesAuto Power Off: YesMax. Display: 1999Over Range Display: "1"Operating Temperature: 0?~40?Relative Humidity: 30%RH~85%RHDimension: 105×164×70mmWeight: 900gPower: 9V,6 x AA/1.5V battery (Not Included)Package Include:1 x Digital Insulation Tester1 x 10A Test Leads2 x Alligator Clip1 x Shoulder Strap1 x User Manual (only electronic version available, which can be obtained from the above link)Note?The batteries are not included in the package due to Aviation Security Check. You need to perchase suitable batteries locally. Sorry for any inconvenience caused.

Manufacturer: OUTEST Brand: OUTEST