|
|
-
4.2 of 5.0 with 38 Reviews
SALE PRICE: $376.90
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10087
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10087
Features:4 pole earth resistance measurement 0 to 209.9k¦¸ with min. resolution 0.001¦¸Auto ranging soil resistivity measurement 0 to 1999k¦¸mSeries interference voltage Ust(AC only) 0~50.9VrmsMeasures frequency 400~500HzMeasureing Voltage Um optional/auto-selected 10Vrms 94Hz, 105Hz, 111Hz, 128HzTest current maximum 80mAAdvance filtering method based on FFT(fast fourier transform) reduces noise interferenceCompensation for residual resistance RkData Memory 1000 setsConforms to CATIV 150V, CATIII 300VPackage includes:1 * DY4300B Earth Ground Resistance Tester1 * Carry Case
-
4.2 of 5.0 with 38 Reviews
SALE PRICE: $376.90
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10087
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10087
Features:4 pole earth resistance measurement 0 to 209.9k¦¸ with min. resolution 0.001¦¸Auto ranging soil resistivity measurement 0 to 1999k¦¸mSeries interference voltage Ust(AC only) 0~50.9VrmsMeasures frequency 400~500HzMeasureing Voltage Um optional/auto-selected 10Vrms 94Hz, 105Hz, 111Hz, 128HzTest current maximum 80mAAdvance filtering method based on FFT(fast fourier transform) reduces noise interferenceCompensation for residual resistance RkData Memory 1000 setsConforms to CATIV 150V, CATIII 300VPackage includes:1 * DY4300B Earth Ground Resistance Tester1 * Carry Case
-
4.2 of 5.0 with 25 Reviews
SALE PRICE: $564.17 1% OFF
Manufacturer: AMPROBE INSTRUMENTS
Brand: Amprobe
Manufacturer: AMPROBE INSTRUMENTS
Brand: Amprobe
AMPROBE INSTRUMENTS AMB-2 ANALOG INSULATION TESTER, 500V, 100MOHM
-
4.2 of 5.0 with 35 Reviews
SALE PRICE: $579.00 1% OFF
Manufacturer: COLE-PARMER
Brand: AEMC
Manufacturer: COLE-PARMER
Brand: AEMC
electronic-components
-
4.2 of 5.0 with 20 Reviews
SALE PRICE: $590.59
Manufacturer: Megger
Brand: Megger
Model: 6220-756
Manufacturer: Megger
Brand: Megger
Model: 6220-756
|
The Megger 6220 series four-piece duplex test lead set includes two current leads with spring clamps and two potential leads with crocodile clips for use with the with Megger DLRO200 and DLRO600 digital microhmmeters. These current and potential test leads are for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The spring clamps have a 2.4" (60 mm) jaw opening, and the crocodile clips (also known as alligator clips) have a 0.9" (22 mm) jaw opening. Both the spring clamps and crocodile clips provide hands-free connection to a conductor. The leads have a maximum current input of 600 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddl...
-
4.2 of 5.0 with 20 Reviews
SALE PRICE: $590.59
Manufacturer: Megger
Brand: Megger
Model: 6220-756
Manufacturer: Megger
Brand: Megger
Model: 6220-756
|
The Megger 6220 series four-piece duplex test lead set includes two current leads with spring clamps and two potential leads with crocodile clips for use with the with Megger DLRO200 and DLRO600 digital microhmmeters. These current and potential test leads are for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The spring clamps have a 2.4" (60 mm) jaw opening, and the crocodile clips (also known as alligator clips) have a 0.9" (22 mm) jaw opening. Both the spring clamps and crocodile clips provide hands-free connection to a conductor. The leads have a maximum current input of 600 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddl...
-
4.2 of 5.0 with 48 Reviews
SALE PRICE: $618.99 1% OFF
Manufacturer: NF Corporation
Brand: NF
Manufacturer: NF Corporation
Brand: NF
-
4.2 of 5.0 with 2 Reviews
SALE PRICE: $659.00 1% OFF
Manufacturer: CEM
Brand: CEM
Manufacturer: CEM
Brand: CEM
9050 Insulation Tester is designed according to standard EN61557-2, and also respects international electrical safety standard IEC 61010-1.
-
4.2 of 5.0 with 23 Reviews
SALE PRICE: $764.99 1% OFF
Manufacturer: NF Corporation
Brand: NF
Manufacturer: NF Corporation
Brand: NF
-
4.2 of 5.0 with 18 Reviews
SALE PRICE: $843.76
Manufacturer: Megger
Brand: Megger
Model: 242004-18
Manufacturer: Megger
Brand: Megger
Model: 242004-18
|
The Megger 242002 series duplex test lead with C-clamp is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 2" (5 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger...
|
|