Capacitance & Resistance Meters - Page 38

Manufacturer: Albedo Telecom Inc. Brand: Albedo Metro.Iso.M1

Metro.ISO.M1 Hand-held. Albedo Metro.ISO Insulation Measuring multimeter. Test Insulation-Resistance with selection of 100, 250 and 500V, Isolation up to 10GOhms, Capacitance, AC / DC Voltage, Fault location and Selectable measuring lead pairs. Includes internal battery pack, lead pairs, AC/DC adapter and transportation bag.

Manufacturer: Megger Brand: Megger Model: 242104-2-16

The Megger 242104-2 series duplex test lead with C-clamp is for use with Megger 247100, 247101, DLRO200, and DLRO600 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements. The lead has a maximum test current input of 100 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 4" (10 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardiza...

Manufacturer: COLE-PARMER Brand: Megger

These insulation resistance testers are the recognized standard in the industry. They have proven so reliable and popular that they have been reintroduced, generation after generation, with circuitry upgraded to complement the familiar design. True analog movement remains a popular feature, especially where diagnosis is involved. The trained eye can get much more than just a MÙ reading from an analog meter. Similarly, a guard terminal adds a valuable extra dimension when more than just pass/fail testing is desired. With commonly four test voltages, extra range to the resistance measurements, continuity and kÙ functions for proofing and troubleshooting, they address the widest range of applications and are the most general models. FEATURES BD422101The most basic hand-cranked tester. Dating back to its initial version, this has the longest history and is the most popular model ever on the market. The dependability of this self-contained generator remains unchallenged BD422103 A dual source version, combining line operation and hand-crank, ease and dependability BD422104 Operates on convenient throwaway batteries BD422105 Battery rechargeable by internal charger and powered by 120 volt ac, 50/60 Hz line BD422106 A lower-voltage, lower-range version of the BD422101. With a 50 V output selection, it is the model of choice for testing sensitive equipment, subassemblies, and components BD422107 High Resistance Model - Offering a greater range (by a power of 10). This is the instrument of choice where accurate readings of exceptionally high resistance values are preferred over pass/fail infinity readings. This capability makes this unit especially suited for long-term trending of new equipment where readings will commence from factory-fresh values BD422109 Digital Autoranging Model - For those who prefer digital, this model includes all of the Megger series standard capabilities Model 210170 - High Resistance Model - Offers a greater range (by a power o

Manufacturer: Applent Brand: Applent

Features:High brightness, ultra clear four-color VFD Display.Auto Zero-Adjust for each rangeComparator Function: Stores up to 30 sets of measurement conditions HI/IN/LOW/GD/NG VFD Show or HANDLER out.Four-terminal resistance measurement.Build-in RS-232C, Handler(EXT-I/O) InterfaceBeeper and brightness can be adjusted.Internal,Manual,External and Remote Trigger.USB Interface(Optional).SCPI compatible command sets.Application:Pure resistancethe resistance of motor and transformerwindingsEnamel-insulated wire resistance.relay/switch connector contactsPCB patternsSpecifications:Parameter:DC resistanceAccuracy: 0.01%Measurement RangeMeasurement Range: 0.1μΩ ~ 110MΩSignal Source:Current range: 1μA~1ARange:Automatic and manual with 11 rangesSpeed:150 times/second, 10 times/second, 2 times/secondResult Display:Show, ΔABS,Δ% and sorting resultMax reading: 200000Correction:Open & short resetComparator:30 groups record, NG-LO, GD-IN, NG-HI display and output, adjustable beep and volumTrigger: In, manual, external and remoteConfiguration Interface:RS232C, Handler interface (PLC interface)Test terminal:4 terminal shielding ( 2 check terminal and 2 driving terminal) and external shielding ground sectionPower Supply:Voltage: 198V AC - 240V AC;Frequency: 50Hz ;Power: Max 15VA 110V,60Hz is also avaliableAccessories:ATL501:Kelvin clip ATL801:232 communication cable

Manufacturer: YOKOGAWA Brand: Yokogawa

1 New Yokogawa Ye/250 Panel Meter (S1-3)

Manufacturer: ELIKE Brand: ELIKE Model: DT6013 Color: Orange and Grey

DT6013 is a 1999 digits capacitance meter/capacitor tester decent to measure the capacitance of capacitor. It can test spare capacitors before using them as replacements and it is good to diagnose a faulty circuit board if the fault was due to a faulty capacitor. The meter is of compact structure and pocket size with rubber protection holster in case of dropping. Large integration guarantees high reliability and durability. The hold function keeps the reading on the display.A low-battery indicator signals when the meter's batteries need to be replaced. The '1' signals to remind to switch to a higher range. Features: Data Hold, Over-range Indication, Low Battery Indication, ZERO Adjustment. Input Overload Protection , Rubber Protection Holster, Backup. Specifications: Accuracy:200pF/2nF/20nF/200nF/2uF/20uF/200uF/ ±（0.6% readings +2） 2000uF ±（1.2% readings +2） 20mF ±（2.5% readings +3） Max Display: 1999 digits Protection: 0.1A fuse Meter Size: 5.8*2.8*1.4inch / 147*70*35mm Net Weight: 5.3oz / 150g Battery: 1x9V (6F22) (not included) Package Contents : *1 x 6013 capacitor meter *1 pair x alligator clips with protective package *1 English Manual Accuracy maybe affected by the test lead's length and distance of test leads, especially testing pF small capacitance.Be careful the surrounding EMI or RF noise may affect the pF reading.

Manufacturer: Extech Brand: Extech Model: 382254

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U5481B

The U5481B enables the U1700 Series Handheld Capacitor or LCR Meters and U1401A Handheld Multifunction Calibrator/Meter to be easily connected to a PC for fast transfer of data.

Manufacturer: Yosoo Brand: Yosoo

Features: Rotary switch control, a key measurement for convenient use. Main chip is the DIP, easy for electronic enthusiasts to DIY or update the main chip. Automatic shutdown, shutdown current is only about 20nA. Automatically detects NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout. Test NPN and PNP transistor common-emitter current amplification factor, the base-emitter threshold voltage, off the collector - emitter leakage current. Automatically test the pins of a component and show on the display. Measure FET gate threshold voltage and gate capacitance. For the following 2100Ω resistor while measuring its inductance measuring range from 0.01mH - 20H. Description: Multi-functional transistor tester for automatic detection of NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout. Also can be used as square signal and PWM signal generator. Notice: Before measuring capacitance, the capacitor must be discharged, otherwise very likely damage the meter Specifications: Type: DIY Kit Display: 160*128 LCD Power Supply: 1 * 9V Battery(not included); DC 6.8-12V Current: Approx. 30mA Power Supply: 1 * 9V Battery(NOT Included) Resistance Measurement: Max. 50MΩ Resistance Resolution: 0.01Ω Capacitance Measurement: 25pF~100mF Capacitance Resolution: 1pF DC Voltage Measurement: Up to 50V Screen Size: 3.7 * 3cm / 1.45 * 1.18in PCB Size: 7.8 * 6.2cm / 3.1 * 2.44in Package List: 1 x Transistor Tester

Manufacturer: UNI-T Brand: UNI-T

UNI-T UT210E True RMS AC/DC Current Mini Clamp Meters w/ Capacitance Tester Redjaw capacity: 17mmtrue rms: ¡Ìdiode: around 3.0v v.f.c.: ¡Ìncv: ¡Ìdata hold: ¡Ìzero mode: ¡Ìlcd backlight: ¡Ìauto power of: around 15 minutes continuity buzzer: ¡Ìlow battery indication: ¡Ü2.5v input protection: ¡Ìinput impedance for dcv: ¡Ý10m?AC current (A): 2 A / 20 A / 100 A ¡À (2.5% + 5)Direct Current (A): 2 A / 20 A / 100 A ¡À (2% + 3)AC voltage (V): 2V / 20V200V / 600 V ¡À (1.0% + 3)DC voltage (V): 200 mV / 2V / 20V200V / 600 V ¡À (0.7% + 3)Resistance (¦¸): 200 ohm/ 2 ohm / 20 Kohm/ 200 Kohm / 2 Mohm / 20 Mohm ¡À (1.0% + 2)power: aaa 1.5v x 2 not included lcd size: 39.3mm 21.5 mmproduct color: redpackage list:1 uni-t ut210e mini clamp meters1 test lead1 english manualNote:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is ¡À1-3 cm.