|
|
-
4.2 of 5.0 with 42 Reviews
SALE PRICE: $880.00
Manufacturer: Megger
Brand: Megger
Model: 6220-755
Manufacturer: Megger
Brand: Megger
Model: 6220-755
|
The Megger 6220 series four-piece duplex test lead set includes two current leads with spring clamps and two potential leads with crocodile clips for use with the with Megger DLRO200 and DLRO600 digital microhmmeters. These current and potential test leads are for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The spring clamps have a 2.4" (60 mm) jaw opening, and the crocodile clips (also known as alligator clips) have a 0.9" (22 mm) jaw opening. Both the spring clamps and crocodile clips provide hands-free connection to a conductor. The leads have a maximum current input of 600 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddl...
-
4.2 of 5.0 with 50 Reviews
SALE PRICE: $1,165.04 11% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 3640 Kit-300ft
Manufacturer: AEMC
Brand: AEMC
Model: 3640 Kit-300ft
|
The AEMC 3640 portable digital ground resistance tester with 300 ft. leads performs 3-point fall-of-potential ground resistance testing and 2-point continuity tests on bonding, and is suitable for rugged use by maintenance crews performing multiple tests. The compact unit is well-suited for a range of applications, such as testing single rod and small ground grids at telecommunications sites, cellular towers, and for lightning protection systems, grounded equipment, and new construction. The tester is designed for ease of use, with “connect–press–read†operation, three color-coded terminals, and a large Press to Measure button. The large LCD screen indicates low battery status, over-range, and lead reversals. The tester displays direct readings from 10 to 1999Ω. It is engineered to reject high levels of interference in difficult conditions, such as high stray currents that can affect accuracy. Response time is approximately six seconds for a stabilized measurement. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.The AEMC 3640 double-insulated tester with CE mark meets or exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. It is fuse-protected and can withstand 250V RMS in the event of a system fault with spikes of 3000V AC or 1000V DC. Safety ratings include EN61010-1, CAT III, and pollution degree 2. The tester kit includes two 300ft. color-coded leads (one red, one blue), two 100ft. leads (one green, one black), four 14.5" T-shaped auxiliary ground electrodes, five spaded lugs, and a 100ft. tape measure, a carrying case for the tester, and a carrying case for the kit accessories. Specifications Operating frequency 128Hz square wave Measurement range 0 to 19.99Ω/20.00 to 199.9Ω/ 200.0 to 1999Ω Resolution 10mΩ/100mΩ/1Ω Test current 10mA/1mA/0.1mA Accuracy + or - 3% of reading + 3ct/ + or - 5% of reading + or - 3ct Operating temperature ra...
-
4.2 of 5.0 with 10 Reviews
SALE PRICE: $1,430.00 4% OFF
Manufacturer: Megger
Brand: Megger
Model: 242006-30
Manufacturer: Megger
Brand: Megger
Model: 242006-30
|
The Megger 242006 series duplex test lead with Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The Kelvin clip directs current through one jaw and potential through other jaw when taking resistance measurements on cables and small wires. It has a 1.5" (4 cm) jaw opening.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headqua...
-
4.2 of 5.0 with 47 Reviews
SALE PRICE: $1,536.60 24% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: GP-2A
Manufacturer: Amprobe
Brand: Amprobe
Model: GP-2A
Poor grounding is dangerous and contributes to unnecessary downtime and increases the risk of equipment failure. The Amprobe GP-2A Earth Ground Resistance Tester provides accurate and reliable measurements for ground resistance and soil resistivity to assure the safety and performance of an electrical system. The GP-2A is complete with PC software that allows the user to download critical recorded measurements and to create professional reports for customers.
-
4.1 of 5.0 with 36 Reviews
SALE PRICE: $10.00 10% OFF
Manufacturer: Instek
Brand: GW Instek
Manufacturer: Instek
Brand: GW Instek
The LCR-800 Series are high-end digital LCR meters for component/material measurements, applicable to various R&D activities and assembly lines. The large 240 x 128 dot matrix LCD display provides ample room for two measurement items and setup parameters, allowing you to grasp measurement results quickly. All test modes are able to measure supplementary factors, such as, R/Q, C/D, C/R, and L/Q. The LCR-821 also contains precise resistance measurements as a combination of absolute value and phase angle. 100 sets of measurement setup memory allow sharing a single unit among multiple testing conditions or sites. For a better viewing experience in a standard PC monitor, proprietary Windows based software is accessible via the RS-232C terminal. The handler interface is also a standard feature for LCR-826/827/829.
-
4.1 of 5.0 with 103 Reviews
SALE PRICE: $17.40 3% OFF
Manufacturer: Soondar
Brand: NEWCASON
Manufacturer: Soondar
Brand: NEWCASON
Capacitance Range 200pF ±2% 2000pF 20nF 200nF 2uF 20uF 200uF 2000uF 20mF Package Includes: 1 x capacitor meter 1 x probes 1 x user manual 1 x battery
-
4.1 of 5.0 with 43 Reviews
SALE PRICE: $19.95
Manufacturer: RSR Electronics
Brand: JYETech
Manufacturer: RSR Electronics
Brand: JYETech
You will have your own capacitance meter after successful completion of this project.
Range: 1pf - 500uF
About 1% accuracy
Automatic range switch
Zeroing available
Real time serial output of measurement read-outs with time stamp
Low cost and easy to build
8 to 16V DC power supply required (but not included))
Size: 3" x 2.3" x 0.6"; Wt: 1.5 oz.
-
4.1 of 5.0 with 16 Reviews
SALE PRICE: $37.99 1% OFF
Manufacturer: TOOGOO(R)
Brand: TOOGOO(R)
Color: Black
Manufacturer: TOOGOO(R)
Brand: TOOGOO(R)
Color: Black
|
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. Our products will enhance your experience to unparalleled inspiration. TOOGOO(R)Multifunction LCD backlight transistor tester diode thyristor Capacitive ESR LCR meter with black plastic housingCharacteristics:Powered by 9V battery. NPN and PNP transistors, N-channel and P-channel MOSFETs, diodes, thyristors, Resistors, capacitors or other devices to automatically detect. The pins of a component to test and display on the screen automatically Two-button operation, automatic shut-off to prevent unnecessary waste Short detection time: only 2 seconds. It's normal cost 1 minute charging capacitor detection Note:Please make sure capacitors are discharged before Testing Specifications:. Material: PCB + Plastic Display: 128 x 64 LCD shutdown current: 20 nA resistance test Range: 0.5¦¸-50M¦¸ inductance test Range: 0.01mH-20H capacitor test Range: 25 pF 100000uF item size: 13 x 6.5 x 2cm / 5.1 x 2.6 x 0.8in item weight: 103g / 3.7 oz package list: 1 x transistor testerNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.
-
4.1 of 5.0 with 6 Reviews
SALE PRICE: $43.20 1% OFF
Manufacturer: SODIAL (R)
Brand: SODIAL(R)
Model: 052194
Color: Black
Manufacturer: SODIAL (R)
Brand: SODIAL(R)
Model: 052194
Color: Black
|
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. Resistance tester - SODIAL(R) HD HDT20A insulation Resistance tester meter Mega ohmmeter voltmeter 1000V / LCD backlight Blackoutput load: greater than equal 1000MOhm (90% ~ 110%) insulation resistance: greater than equal 500 Mohm withstand voltage: AC 2kV 50Hz 1min insulation resistance (ohms): test voltage: 250V / 500V / 1000V output current: 250 V (R = 250kOhm) 1 mA; 500 V (R = 500 ohms) 1 mA; 1000V (R = 1MOhm) 1mA 200mOhm 250V: 0.1-20MOhm; 500V: 0.1-50MOhm; 1000V: 0.1-100MOhm +/- 4% 2000MOhm 250V: 20-500MOhm; 500V: 50-1000MOhm; 1000V: 100-2000MOhm +/- 4% Power: 6 * 1.5V AA batteries ( not included) LCD size: 55 * 35mm product net weight: 500 g product size: 175 * 115 * 55mm product color: Blackpackage list: 1 * HD HDT20A insulation Resistance tester 1 pair test leads 1 pair of alligator clips 1 * English manualNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/-1-3 cm.
-
4.1 of 5.0 with 35 Reviews
SALE PRICE: $49.99 1% OFF
Manufacturer: DUOYI
Brand: Yi Duo
Model: DY30-1
Manufacturer: DUOYI
Brand: Yi Duo
Model: DY30-1
Features:Three test voltages, measure insulation resistance to 20G¦¸AC voltage measurement to 600VLow resistance buzzerData hold, auto rangeLow battery warningComplete with test leads, heavy duty carry casePackage includes:1 * DY30-1 Insulation Resistance Tester1 * Accessory kit (Insulation Test Leads and Leather Case)1 * Gift Box
|
|