Electrical Testing - Page 194

Manufacturer: RF Explorer Brand: RF Explorer Model: 915M

With a Frequency band of 910-920 MHz, the 915M RF Explorer is a powerful little spectrum analyzer that meets all your needs! The 915M is one of our most coveted handheld digital spectrum analyzer, aimed to provide a cost efficient tool for work in all ISM popular frequency bands. It is based on a highly integrated frequency synthesizer which offers high performance, compact size, low consumption and low cost. It can be used outdoors and indoors and works well with a PC connected to it for extra functionality using standard mini-USB 2.0 connector. It is pocket sized and lightweight and comes with a handy solid aluminium carrying case.This product also comes with an integrated RF Signal generator and a Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes. In addition to this you will receive a 16 hour LiPo rechargeable battery and Windows PC software to increase functionality. It can be extended with internal Expansion Modules for additional band and functionality. Weight: 185g Size: 113x70x25 mm

Manufacturer: Fluke Corporation Brand: Fluke Model: Fluke-113 Color: Yellow

The Fluke 113 True-RMS Utility Multimeter is a digital multimeter (also known as a multitester) that measures AC/DC voltage to 600V, resistance to 60 kiloohms, and capacitance to 9,999 microfarads. The meter has a diode check for testing general-purpose germanium, silicon, and power diodes, and a continuity beeper which provides audible detection of resistance by turning on at less than 25 ohms and off at 250 ohms. It is also able to simultaneously check for voltage and continuity. This true RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform and has both manual- and auto-ranging capabilities for user flexibility. A Max/Min function records signal fluctuations and a hold function freezes measurements on the display. The 6000-count resolution, 3-1/2 digit digital display is backlit for readability in low-light conditions. The meter is safety rated for Category III to 600V and Category IV to 300V. It uses a 9V battery (installed) with a battery life of approximately 300 hours without backlight and has a sleep mode to maximize battery life. The meter measures 6.58 x 3.35 x 1.81 inches (H x W x D) and weighs 13 oz./404 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a holster with built-in probe holders for convenient storage. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, ...

Manufacturer: AEMC Brand: AEMC Model: 502

The AEMC 502 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 400A (amperes). The clamp has two jaws that can close around an electrical conductor up to 28mm (1.1 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V, frequency to 400kHz (kilohertz), and resistance to 400Ω (ohms). The meter has a rotary switch to select the property to measure, and a 4,000-count LCD that shows the reading numerically and in a 42-segment bar graph. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on two AAA batteries, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets EN (European Standards) safety standard 61010, and is rated for CAT (category) III installations to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation and CAT II installations to 600V, which covers energy-consuming equipment connected to a fixed installation, including household, office, and laboratory appliances. It has CE (European Conformity) marking. The unit comes with a soft carrying case.Spe...

Manufacturer: Autonics Brand: Autonics USA, Inc

Counter & Timer, 1/16 DIN, 4-Digit, LED, 1 Preset, Relay & NPN Output, 100-240 VAC

Manufacturer: IDI Brand: IDGroup

Contact Probes CONCAVE .100 CENTER

Manufacturer: Amprobe Brand: Amprobe Model: 34XR-A Color: Multicolored

Digital multimeter measures alternating current (AC) and direct current (DC) to 10 amp, Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations and category III installations.

Manufacturer: Seeedstudio Brand: RF Explorer Model: G400

RF Explorer is a handheld digital spectrum analyzer, aimed to provide a very affordable tool for work in all ISM popular frequency bands. It is based on a highly integrated frequency synthesizer which offers high performance, compact size, low consumption and low cost. It has been designed to be used outdoor and indoor, and works nice with a PC connected for extra functionality using standard mini-USB 2.0 connector. MODEL: 2.4G Feature Pocket size and light weight Solid aluminum metal case Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes Integrated RF Signal Generator Lifetime free firmware upgrades available, open to community requested features High capacity Lipo for 16hs+ of continuous run, rechargeable by USB Windows PC client Open Source Can be extended with internal Expansion Modules for additional band and functionality Specification Frequency band: 2400-2485 MHz Frequency span: 2-85 Mhz Graphics LCD 128x64 pixels, great visibility outdoors PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits Backlight for great indoor visibility Standard SMA 50 ohms connector, a matching antenna is included Amplitude resolution: 0.5dBm Dynamic range: -105dBm to -15dBm Absolute Max input power: +5dBm Average noise level (typical): -100dBm RF Generator amplitude: -30dBm to +1dBm Frequency stability and accuracy (typical): +-10ppm Amplitude stability and accuracy (typical): +-3dBm Frequency resolution: 1Khz Resolution bandwidth (RBW): automatic 58Khz to 812Khz Weight: 185g Size: 113x70x25 mm RF Explorer handling care suggested link: http://www.rf-explorer.com/care

Manufacturer: PROBE MASTER,INC

100 MHz Heavy-Duty Probe Kit - 12 piece This oscilloscope probe kit contains: three probes (x1, x10 and switchable probe) sprung hooks, ground leads, trimmer tool and a 4" extender tip. The probes feature a snap-on, rotating ground lead and a heavy-duty fixed tip. In protective case. (USA)

Manufacturer: Extech Instruments Brand: Extech Model: ETK35

This special value Electrical Test Kit is assembled with True RMS Meters to provide all the electrical testing needs for installation and repair of electrical systems, HVAC equipment and large appliances, plus AC/DC Clamp Meter for automotive and motor applications.

Manufacturer: Fluke Corporation Brand: Fluke Model: TLK281

Kit includes (1) Insulation piercing clip set, (1) SureGrip silicone test lead set, (1) SureGrip test probe set, (1) SureGrip alligator clip set, (1) SureGrip large jaw alligator clip set, (1) Soft case. Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay, and the large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals. An extra long set of alligator clips easily grip to the alternator BAT terminal or the S terminals. The set comes with silicone test leads and a case to keep it organized. Tested to 60V DC.