Electrical Testing - Page 196

Manufacturer: Mill-Max Brand: Mill-Max

Contact Probes SPRING-LOADED PIN .137 20u GOLD

Manufacturer: VDO Brand: VDO Model: 190 963

VDO 190-963 Ammeter - -300 A to +300 A - Electronic - Cockpit

Manufacturer: Amprobe Brand: Amprobe Model: 4560555

AMP-310 600A AC Motor Maintenance True-RMS HVAC Clamp Meter with Motor Rotation, 1 and 3-phase sequence testing, inrush current monitoring, temperature, DC Micro amps, capacitance, low pass filter, Amp-Tip, NVC, CAT III 600 V.

Manufacturer: Harwin Brand: Harwin

Contact Probes 2.54mm SPRING PROBE 2 PART CONCAVE HEAD

Manufacturer: Vetus Brand: ETCR Model: ETCR6000

The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. Technical Specifications Function: Measurement of AC/DC current, leakage current Power Supply: 6F22,9V Test Mode: Clip-on CT, integral mode Clamp Size: Φ7mm Measurement Range: 0mA-60.0A AC/DC Resolution: 1mA AC/DC Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%rh) Display Mode: Four digits LCD display Sampling Rate: 2 times/s Frequency: AC: 45Hz-400Hz Polarity Indication: DC current auto identified and display"-" Test Position: Tested wire in the jaw center Line Voltage: AC600V RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate: 9600, data bit:8, stop bit:1 Data Memory: 99units, FULL blinks when the memory is full Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current: 10mA Consumption: 10mW Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC2kV/rms (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Vetus Brand: ETCR Model: ETCR6200

It could be widely use in those fields as car repair, car leave factory test, car parts test, the current detection in telecommunication room, electric power overhauling, meteorology, oil detection, etc. Technical Specifications Function: Measurement of AC/DC current, leakage current, repairing the car circuit.  Power Supply: Zn-Mn dry battery,6F22,9V, continuous use for 30h Test Mode: Clip-on CT, non-contact measurement Clamp Size: 25mmX35mm Measurement Range: 0mA-60.0A AC/DC Resolution: 1mA AC/DC Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%rh) Display Mode: Four digits LCD display Sampling Rate: 2 times/s Frequency: AC: 45Hz-400Hz Polarity Indication: DC current auto identified and display"-" Test Position: Tested wire in the jaw center Line Voltage: AC600V RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate: 9600, data bit:8, stop bit:1 Data Memory: 99units, FULL blinks when the memory is full Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current: 10mA Consumption: 10mW Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC 3700V/rms. (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Vetus Brand: ETCR

Technical Specifications Function: DC leakage current measurement, DC current measurement,Automobile leakage maintenance Power Supply: 6F22,9V Process Type: Clamp CT Display Type: 4 Digits LCD Clamp Size: 25mm×30mm Meter Dimension: LWH: 175mm×70mm×38mm LCD Dimension: 35mm×21.5mm; Display Dimension: 32mm×15mm Sampling Rate: 2 Times/Second Shifting: Automatic Shift Range:0.0mA～6.00A DC Resolution: 0.1mA DC Accuracy ( 23°C±3°C, below 70%RH): 0.0mA~300.0mA DC: ±2%rdg±5dgt; 0.30A~6.00A DC: ±2%rdg±5dg tLine voltage: Below 600V DC USB interface: With USB interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data Memory: 99 sets, "FULL" Blinking when memory is full Peak Maintaining: Peak value capture hold function, press HOLD without Release to display peak value Reading Hold: Reading hold function: "DH" symbol display Overflow display: Range overflow function: "OL" symbol display Automatic Shutdown: 5 minutes after the boot,auto shutdown to reduce battery consumption Battery Detection: When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. Working Temperature and Humidity: -10℃～50℃; below 80%rh Limit Temperature Error: -10℃～0℃ and 40℃～50℃,Maximum error increase 2%rdg Storage Temperature and Humidity: -10℃~60℃; below 80%rh Insulation Strength: AC3700V/rms (between core and box) Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) Accessories: Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece; bag 1 piece

Manufacturer: Kichler Brand: Kichler Color: Clear

This Kichler G4/T3 Bi-Pin 12 V LED bulb is comparable to the 20 Watt Halogen. Featuring a 4200K cool white Kelvin temperature, this bulb puts forth a 300 degree Omni-directional beam spread angle. Wet area rated.

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-BASIC

FlukeView Forms Basic can be used alone to download measurement data and create reports that can be saved and printed. FlukeView Forms comes with an array of standard analysis and reporting forms that get you started on displaying your data in tables, graphs or helpful diagrams. You can leave notes on the forms to draw attention to a particular event. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. To address the increasing demands for reporting and documentation. It increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Owners of Fluke 280 series, 180 series, 789 and 1550B, who do not need the full power of FlukeView forms, can use FlukeView Basic version. Transfer data points from your meter to your PC and use the two standard, non-customizable forms to display your readings in table or graphical form. For a larger array of forms or to use FlukeView Forms Designer to customize your forms, upgrade to FlukeView Forms version 3.3 with FVF-UG (sold separately). Comes with USB/IR cable. Number of standard forms: 2. Number of multiple meters whose data can be viewed simultaneously: 1. Number of concurrently running instances of FlukeView Forms allowed: 1. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install), USB port. FlukeView Forms supports the following test tools: 280 Series, 789, 1550B, 1653, 180 Series. Size: 203 x 100 x 50mm.

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks TEST JACK VIO