Electrical Testing - Page 213

Manufacturer: Fluke Brand: Fluke Model: FLUKE-88-5/A KIT Color: Automotive Multimeter Combo Kit

The Fluke 88 V/A KIT Automotive Multimeter Combo Kit comes with the 88 Series V automotive multimeter, silicone test leads, alligator clips, test probes, inductive RPM pick-up probe, ToolPak magnetic meter hanging kit, temperature probe, two automotive backprobe pins, insulation piercing probe, and a durable carrying case. The digital multimeter (also known as a multitester) is designed for use in high energy environments such as those found on hybrid vehicles and measures AC/DC voltage up to 1,000V, AC/DC current to 10 amp (20 amp for a maximum of 30 seconds), frequency to 200 kilohertz, resistance to 50 megaohms, capacitance to 9,999 microfarads, temperature from -200 to +1090 degrees C (-328 to +1994 degrees F) and includes continuity and diode tests. The 6,000-count resolution, 3-3/4 digit digital display has a bright white backlight for readability in low-light conditions with a 4-1/2 digit mode for precise measurements and displays an analog bar graph which is useful for fast-changing or unstable signals. The meter performs millisecond pulse width measurements for fuel injectors and has Min./Max.-Average recording as well as a Min./Max. Alert to automatically capture variations. A duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle and a peak capture function detects intermittent problems and transients as low as 250 microseconds. The meter has both manual- and auto-ranging modes for user flexibility, and an auto-hold function to capture stable readings. The relative mode removes test lead resistance from low ohms measurements. This meter is safety rated for Category III up to 1000V and Category IV up to 600V and can withstand hazardous volt spikes in excess of 8,000V to reduce risks of spikes and surges caused by load switching and faults on industrial circuits. It uses a 9V battery (installed) that has a battery life of approximately 400 hours without backlight and has a selectable sleep mode to maximize battery life. The meter measures 20.1 x 9.8 x 5....

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Calibrating Adapter for all SECUTEST and METRATESTER.  Application The adapter is used for testing the measuring accuracy of test instruments in accordance with DIN VDE 0701-0702 and IEC 62353 (VDE 0751). As a rule, these instruments must be tested once each year as set forth by accident prevention regulation DGUV provision 3 (previously BGV A3), as well as for certification in accordance with the ISO 9000 quality standard. All measuring ranges for tests required in accordance with DIN VDE 0701-0702 such as protective conductor resistance, insulation resistance, equivalent leakage current and residual and/or contact current must be tested

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Concentric nebulizer (Pyrex), 1/pk. - 58

Manufacturer: Instek Brand: GW Instek Model: ATA-002

Comes with wideband. Upper resonant frequency 1GHz. Primary sensor type: H-field. Near field probe is needed for fitting GSP spectrum analyzers.

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Plugs & Test Jacks PIN TIP JACK GOLD PL BU-00234-2

Manufacturer: OWON Brand: OWON

Model:SDS7102-V(PLEASE BUY FROM AUTHORIZED DEALER:VIVITEQ ,WE ARE IN THE USA ). Description: The SDS7102 is a 2 channel Digital Storage Oscilloscope with 100MHz bandwidth, 1GS/s sample rate, and 8 inches (800x600) color TFT-LCD screen and AutoScale function to simplify the operation. The oscilloscope includes 2 probes, USB cable, probe adjust pen, software CD, power adapter and user manual. Features: 100MHz Bandwidth 1GS/S Real-sample Rate 10M points Record length inch color LCD(800X600 Pixels) Autoscale function Display Grid: 10div, Horizontal: 15 div Size: 340mm x 155mmx 70mm (L*H*W)10. Light Weight: 1.8kg (without battery) Bandwidth is 60-300MHz Sample rate is 500MS/s - 3.2GS/s 10M points Record length USB Interface: This portable scope can be used as USB scope as well, the user can view/measure/save/print waveform on the PC; View and set the horizontal time base of each selected channels; can view and set the Voltage Scale of each selected channels; also the Period, Frequency, and Peak Value of selected waveforms can be displayed. Package Contents: 2 units of 100Mhz probes; Power cord for your country; Driver CD; USB cable; VGA version with LAN module 1x Probe Adjust Pen Manual PLEASE NOTE :THE PACKAGE DOESN'T COME WITH BATTERY .

Manufacturer: S Brand: CAMPELIFY

Manufacturer: NF Corporation Brand: NF

Manufacturer: Kobiconn Brand: Kobiconn

Test Clips NON-INSULATED JACK BLACK BU-60

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3021

The Kyoritsu digital megohmmeter is an auto-ranging insulation tester with four test voltages for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400Ω and AC and DC voltage to 600V, lighting a warning indicator and sounding a buzzer when a live circuit is detected. The comparator function allows a reference resistance value to be set, lights a "pass" or "fail" indicator for subsequent readings, and triggers a buzzer when a reading exceeds the reference value. Up to 99 insulation resistance readings can be stored in the unit's internal memory. When measurement is complete and the range selector is switched off, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter has an LCD with a backlight for visibility in low light that automatically turns off after 60 seconds. The display shows readings numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.This auto-ranging meter automatically selects the appropriate operating range for measurements. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It automatically turns off after 15 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. It comes with a set of test leads with a remote control switch for initiating a test, a test bar, a safety alligator clip, an extension prod, a test lead storage pouch, six AA batteries, and instructions. SpecificationsMaximum insulation resistance measured2,000MΩTest voltagesB009TAL7K...