|
|
-
4.5 of 5.0 with 24 Reviews
SALE PRICE: $445.55
Manufacturer: AEMC
Brand: AEMC Instruments
Manufacturer: AEMC
Brand: AEMC Instruments
|
AmpFlex 300/3000A, 48", 10mV/1mV/A Model 3000-48-2-1 The AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 3000A. Output signal is 10mV/A and 1mV/A. Sensor length is 48". The AmpFlex TM is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex TM is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current over- loads. The sensor assembly is water- proof and insulated for 1000V working voltage. The AmpFlex TM meets EN 61010 and is CE marked. The AmpFlex TM has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60" (1520mm). Longer lengths are available.
-
4.5 of 5.0 with 29 Reviews
SALE PRICE: $447.65 1% OFF
Manufacturer: Johnson / Emerson Connectivity Solutions
Brand: Johnson / Emerson Connectivity Solutions
Manufacturer: Johnson / Emerson Connectivity Solutions
Brand: Johnson / Emerson Connectivity Solutions
Test Plugs & Test Jacks INSULATOR BLACK
-
4.5 of 5.0 with 14 Reviews
SALE PRICE: $449.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 28II
Color: Multicolored
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 28II
Color: Multicolored
|
The Fluke 28II Rugged Industrial Multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The 28II meter has an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15-Degree C to +55-Degree C (5-Degree F to 131-Degree F, -40-Degree C for up to 20 minutes) and 95-Percent humidity, and have been designed and tested to withstand a 3 m (10 ft.) drop. The Fluke 28II multimeter is built to work in the toughest environments. Measures up to 1000 V ac and dc, measures up to 10 A (20 A for 30 seconds), has a 10,000 μF capacitance range and a frequency to 200 kHz. Features an extended ac voltage bandwidth of 15 Hz to 20 kHz. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The multimeter is designed to perform resistance, continuity and diode tests and has a min/max and average recording to capture variations automatically. Features a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The 28II’s hi resolution 20,000 count display mode allows for more accuracy. Backlit keypad buttons allow for easy visibility in lowlit areas while large display digits and 2 level bright white backlight increase visibility.
-
4.5 of 5.0 with 38 Reviews
SALE PRICE: $449.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3345753
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3345753
Fluke 1 phase mini current clamp set for power quality logger. 1A/10A Current.
-
4.5 of 5.0 with 29 Reviews
SALE PRICE: $455.05 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2135.35
Manufacturer: AEMC
Brand: AEMC
Model: 2135.35
|
The AEMC 2135.35 kit provides the accessories needed for setup and teardown in the field when performing 3-point ground resistance testing with an AEMC meter (sold separately). The leads are color-coded according to length. The kit includes two 150ft. leads on spools (one red, one blue), one 30ft. lead (green), and two 5ft. leads (one red, one blue). Also provided are two 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, and a 100ft. tape measure. The tape measure housing has a hand-crank for rewinding the tape after use and a handle with a rubber grip. The kit includes a carrying bag that holds all of the accessories, keeping them organized and available when needed. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA. What’s in the Box? AEMC 2135.35 Ground test kit for 3-point testing (2) 150ft. leads on spools (red/blue) 30ft. lead (green) (2) 5ft. leads (red/blue) (2) 14.5" T-shaped auxiliary ground electrodes (5) spaded lugs 100ft. AEMC tape measure Carrying bag
-
4.5 of 5.0 with 35 Reviews
SALE PRICE: $460.20 1% OFF
Manufacturer: IDI
Brand: D.I.D.
Manufacturer: IDI
Brand: D.I.D.
Contact Probes HEADED SERRATED .075
-
4.5 of 5.0 with 97 Reviews
SALE PRICE: $461.00
Manufacturer: Siglent Technologies
Brand: Siglent
Model: SDS1052DL-AMZN
Manufacturer: Siglent Technologies
Brand: Siglent
Model: SDS1052DL-AMZN
|
The Siglent SDS1052DL is a 50MHz, two-channel, digital storage oscilloscope with a hardware frequency counter, a 500MS/s per channel sample rate, a 32kpts per channel record length, and advanced triggers for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. It has Edge, Pulse, Video, Slope, and Alternative triggers and its math functions include FFT (fast fourier transform). Additional specifications include a rise time of 7.0ns and vertical sensitivity to 2mV per division for capturing low-level signals. Operating menus and help display in Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Portuguese, Spanish, Japanese, Korean, and Italian languages. The oscilloscope has RS232 and USB ports for communication, and a 7" color TFT-LCD (480 x 234 pixels) with an internal 8 x 18 division grid for viewing waveforms.SpecificationsBandwidth50MHzChannelsTwoDisplay7" color TFT-LCDPower100 to 240V, 50WWeight2.5kgDimensions (H x W x D)157 x 323 x 136 mmH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes ha...
-
4.5 of 5.0 with 85 Reviews
SALE PRICE: $465.41 16% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: MS2-100
Color: yellow
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: MS2-100
Color: yellow
Next generation MicroScanner streamlines voice/data/video cable and service testing. Revolutionary user interface makes testing fast, easy, and crystal clear. Everything cable technicians need to know, including available services (10/100/1000 Ethernet, Pots, PoE Voltage), cable length, wire map, cable ID and distance to fault all are displayed on one “oversized†backlit screen. Replace multiple tools by testing all RJ11, RJ45 and coax (F) media with no adapters. Built-in Intellitone digital and analog toning precisely locates virtually any cable or wire pair—even on active networks. Ergonomic design of cable tester features sleek rubber over mold to enhance grip and ruggedness. Includes carry case.
-
4.5 of 5.0 with 5 Reviews
SALE PRICE: $469.95 1% OFF
Manufacturer: SKMI/TAIWAN
Brand: SKMI/TAIWAN
Manufacturer: SKMI/TAIWAN
Brand: SKMI/TAIWAN
40MHz 2-Channel Oscilloscope with Built-in 5MHz Function Generator This oscilloscope has a built-in 5MHz function generator. Two instruments combined in one make it simpler to test and measure. Features:Oscilloscope: 6" rectangular high-resolution CRT Maximum input signal voltage: 400V (DC + AC peak) Maximum external voltage: 300V (DC + AC peak) Trigger Modes: Auto (free run), Normal, TV-V, TV-H Trigger Source: Ch.1, Ch.2, ALT, EXT, LINE Frequency Response 5mV/div to 5V/div: DC to 40MHz (-3dB) Frequency Response X5 magnification: DC to 10MHz (-3dB)Rise time: 8.8ns Function Generator: Frequency: 0.5Hz - 5MHz in 6 steps, controlled by push switch Output waveforms: Sine, Square, Triangle Main output: 0.1 - 20Vp-p (No load), 0.05 - 10Vp-p (50Ω load) Synchronous output: TTL level output, rise time < 60ns, fanout > 20 Size: 15.7"L x 12.8"W x 5.2"H Weight: 23.8 lbs.
-
4.5 of 5.0 with 28 Reviews
SALE PRICE: $470.00 7% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: AFG-2112
Manufacturer: GW Instek
Brand: GW Instek
Model: AFG-2112
|
The AFG-2100 Series arbitrary function generator is a DDS (direct digital synthesized) based signal generator designed to accommodate the educational and basic industrial requirements for an accurate and affordable signal Source, 100 MHz Bandwidth covering the output of sine, square (pulse), ramp (triangle), noise and arbitrary waveforms. The 20m sa/s sampling rate, 10 bit vertical resolution and 4K point memory of the AFG-2100 series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1hz resolution of sine, square and triangle waveforms and the 1 percent to 99 percent adjustable duty cycle of square (pulse) waveform are the remarkable features to greatly extend its application range in various fields. Waveform parameter setting through numeric keypad entry and knob selection. Amplitude, DC offset and other key setting information shown on the 3-1/2" LCD screen simultaneously. USB device interface for remote control and waveform editing. AM/FM/FSK modulation, sweep, and frequency counter functions. Measures 266mm width by 107mm height by 293mm depth.
|
|