Electrical Testing - Page 340

Manufacturer: NF Corporation Brand: NF

Measurement frequency : ≤ 100 kHz

Manufacturer: Gometer Brand: Gowe

Digital Clamp-on Ground Resistance tester DY1000A is a major breakthrough in traditional grounding resistance measurement. It is widely used in the grounding resistance measurement of the power, telecommunications, meteorology, oilfield, construction and the industrial and electrical equipment. DY1000A in the measurement of a grounding system with loop, does not require breaking down the grounding wire, and need no auxiliary electrode. It is safe, fast and simple in use. It can measure out the faults beyond the reach of the traditional methods, and can be applied in the occasions not in the range of the traditional methods. DY1000 can measure the integrated value of the grounding body resistance and the grounding lead resistance. DY1000 are equipped with either a long jaw or a short jaw, as indicated in the figure below. A long jaw is particularly suitable for the occasion of grounding with the flat steel. Specifications Clamp-on Ground Resistance tester Earth Ground Resistance Range Resolution Precision 0.01Ω ~ 0.99Ω 0.01Ω ±1%+0.01Ω 1.0Ω ~ 49.9Ω 0.1Ω ±1.5%+0.1Ω 50.0Ω ~ 99.5Ω 0.5Ω ±2%+0.5Ω 100Ω ~ 199Ω 1Ω ±3%+1Ω 200Ω ~ 395Ω 5Ω ±6%+5Ω 400Ω ~ 590Ω 10Ω ±10%+10Ω 600Ω ~ 1000Ω 20Ω ±20%+20Ω Min. Resolution 0.01Ω Configurable alarm value of resistance 0 ~ 199Ω Memory 99 sets Conductor Size 32 * 55 mm Working Temperature -10°C ~ 55°C Working Humidity 10%~80% LCD Size 28.5 x 47 mm General Characteristics Power AA1.5Vx4 Product Size 285*90*60 mm Product Net Weight 1320g(including battery) Standard Accessories Standard individual packing carry case Standard Quantity per Carton 6 pcs. Measurement of Standard Carton 645*360*276mm (0.064 CBM) Gross weight of Standard Carton 12kgs ***Don't buy others' fakes. Only buy from Gowe Industrial can enjoy after-care service.***

Manufacturer: SALEAE LLC Brand: Saleae

16 Channel Logic Pro Analyzer Specifications Inputs(Digital/Analog): 16 Digital Sample Rate: 500 MS/s (max) Fastest Digital Signal: 100 MHz Supported Logic Levels: 1.2V - 5.5V Directly works with RS-232, 422/3 Analog Sample Rate: 50 MS/s (max) Bandwidth (-3dB): 5 MHz Number of bits: 12 bits Input Voltage Range: -10 V to 10 V Signal-to-noise and distortion the ratio: 62 dB or better Size: 3.6" x 3.6" x 0.59" Weight: 7.8 oz

Manufacturer: EAGLE SIGNAL Brand: EAGLE SIGNAL

TIMER/COUNTER

Manufacturer: A.J. ANTUNES (ROUNDUP) Brand: A.J. ANTUNES (ROUNDUP) Model: 183-1247

GENERATOR (230V)

Manufacturer: Global Specialties Brand: Global Specialties Model: LD-200P

The LD-200P is a programmable high resolution load with digital button control for ease of operation. With a voltage range of 1-63 V and current range of 10 mA to 15 A, the LD-200P is the perfect all-round electronic load. The LD-200P can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode and has a standard USB interface for remote communication.

Manufacturer: Siglent Technologies Brand: Siglent Model: SHS820

The Siglent SHS820 is a 200MHz handheld, two-channel digital oscilloscope for viewing electrical signals and has a 6,000-count multimeter mode for measuring AC and DC voltage. The oscilloscope has a real-time sample rate of 500MS/s and a record length of 32 kpts for acquiring detailed waveforms. Four math functions plus FFT (fast fourier transform), and automatic and cursor measurements allow an in-depth analysis of waveforms. Edge, Pulse, Video, Slope, and Alternative triggers allow isolation of specific signals. The oscilloscope's automatic triggering recognizes signal patterns and optimizes triggering, timebase and amplitude settings. The oscilloscope has a recorder that captures up to 24 hours of waveforms.Additional specifications include a rise time of 1.7ns. The unit has a 5.7" color TFT-LCD. The oscilloscope has a USB host port for storing data on a 4GB-maximum flash drive and a USB device port for connecting to a compatible PC. Operating menus and help display in Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Portuguese, Spanish, Japanese, Korean, and Italian languages. The unit operates on a rechargeable battery pack or a 100 to 240VAC, 50/60Hz adapter/charger (both included). It meets CAT II 300V and CAT III 300V safety standards.SpecificationsBandwidth200MHzChannelsTwoDisplay5.7" TFT-LCD (320 x 234 pixels)Power100 to 240V power adapter, 7.4V 5000mAh battery packWeight1.5kgDimensions (H x W x D)260 x 163 x 53 mmH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the sig...

Manufacturer: B&K PRECISION Brand: B&K Precision

B&K PRECISION 4012A SWEEP FUNCTION GENERATOR FREQ/PULSE 5MHZ

Manufacturer: AEMC Brand: AEMC Model: 1035 Kit

The AEMC 1035 electrical test kit includes a digital megohmmeter plus accessories, for measuring insulation resistance to 20GΩ, low-resistance to 400kΩ, and AC and DC voltage to 600V. In addition to the megohmmeter, the kit comes with a remote test probe, a set of test leads, a set of alligator clips, a test probe, two hook-grip probes, instructions, and a hard carrying case for field testing applications. The remote test probe has a test button for performing measurements and a target light to aid visibility. The auto-ranging meter has four test voltages—50, 100, 250, and 500V—for measuring insulation resistance to indicate the condition of windings or cables in motors, switchgears, electrical and telephone installations, and other insulated equipment. Insulation testing is disabled when a voltage greater than 25V is detected. When measurement is complete and the test button is released, the meter enters voltage detection mode and automatically discharges residual voltage from the circuit under test. High and low thresholds for insulation and resistance measurements can be set, triggering an alarm when readings fall outside the settings, and will be retained even after the meter is powered off. The relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value. The meter has a 4,000-count LCD with a backlight for visibility in low light that automatically turns off after one minute. The display shows readings numerically and on a 34-segment bar graph. The meter is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It automatically turns off after five minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. Megohmmeters are commonly used for electrical ...

Manufacturer: NF Corporation Brand: NF