Electrical Testing - Page 42

Manufacturer: ONETAK Brand: ONETAK

Digital oscilloscope - Channels: 2 - Impedance: 1M ohm 25pF - Coupling: AC/DC - Vertical resolution: 8Bit - Gain range: -6V - +6V (probe X1) -60V - +60V (probe X10) - Vertical accuracy: +/-3% - Time base range: 1ns-20s - Input Protection: Diode，50Vpk - Auto set: Yes(10Hz to 20MHz) - Trigger Mode: Auto,Normal and Signal - Trigger Type: No,Rising edge,Falling edge,Rising edge or Falling edge - Trigger level: Yes - Trigger Source: CH1,CH2 - Buffer Size: 1MB/CH - Bandwidth: 20MHz - Max sample: 48MS/s - Vertical mode: CH1,CH2,ADD,SUB,MUL - Display Mode: X,Y-T and X-Y - Measurements: Yes - Wave save: Osc(Private),Excel and Bmp Spectrum analyzers - Channels: 2 - Bandwidth: 20MHz - Algorithm: FFT(18 windows),correlation,power spectrum - FFT points: 8-1048576/CHN - FFT measure: Harmonic(1-7),SNR,SINAD,ENOB,THD,SFDR - Filter processing: FIR filter supports arbitrary range of frequency sampling method,and Rectangle,bartlett,triangular,cosine,hanning,bartlett_hanning,hamming,blackman,blackman_Harris,tukey,Nuttall,FlatTop,Bohman,Parzen,Lanczos,kaiser,gaussand dolph_chebyshev,window method design. IIR filter support "Butterworth","Chebyshev I",Chebyshev II,"Elliptic" type of filter design Data recorder: - Channel: 2 - Impedance: 1M ohm 25pF - Coupling: AC/DC - Vertical resolution:8Bit - Gain range: -6V- +6V(probe X1) -60V- +60V(probe X10) - Sample: 1 channel : 1K-24M Hz 2 channel : 1K-16M Hz - Save File: Maximum 4G,recording time associated with the sampling rate System: WinXP(SP3),Win7(32/64)

Manufacturer: SMD / D'amore Engineering Brand: MSD Ignition Color: Red to yellow to blue to yellow to red

SMD 14-18v DC Analog LED Volt Meter

Manufacturer: Tenmars Brand: Tenmars Model: TM 191 Magnetic Field Meter

This meter is capable of measuring the electromagnetic field radiation intensity that is produced from electric transmission equipment, power line, air conditioner, refrigerator, computer monitor, video/audio device. Operating temperature & humidity: 5℃to 40℃,below 80% RH. - Storage temperature & humidity: -10℃ to 60℃, below 70%.

Manufacturer: SMD / D'amore Engineering Brand: MSD Ignition Color: Red to yellow to blue to yellow to red

SMD 12v DC Analog LED Volt Meter

Manufacturer: Klein Tools Brand: Klein Tools

Klein Tools CL200VP 600A AC Clamp Meter and Line Splitter Value Pack, AC Current: 600V (max), AC Voltage: 600V -- DC Voltage: 600V (max). Measures temperature, frequency and capacitance. Resitance Range 40MΩ. Frequency 100kHz. Capacitance 100µF. Temperature Range -4 to 1832˚F -- .Temperature is available in both Fahrenheit and Celsius. Audible continuity -- Loud buzzer, Features: Data hold, Diode test, Duty cycle, Backlit display and worklight. Work light stays illuminated through all selections. Low battery and auto power off. 4000 count display. CE Certified. Includes case, thermocouple, test leads, and batteries. Batteries: 3 x AAA, Height: 8.2'' (208 mm). Included Accessories: test leads, batteries, case, thermocouple. Jaw Size: 1.0'' (25 mm). Safety Rating: CAT III 600V. Weight (oz.): 10 oz (283.5 g). Width: 3'' (76 mm).

Manufacturer: Fieldpiece Brand: Fieldpiece Model: ARH4 Color: Multicolored

The Fieldpiece model ARH4 Digital Sling Psychomotor Accessory Head measures both relative humidity and ambient air temperature. It calculates dew point and wet bulb. It's great for calculating target superheat as well as logging -Percent RH, temp, WB or DP over time. The head converts -Percent RH, ambient temperature, dew point temperature, and wet bulb temperature to a voltage at a rate of 1 -Percent RH or Degree to 1mVDC and your reading is displayed on your meter. The ARH4 snaps directly onto Fieldpiece stick meters, data logger, electronic handles and adapters.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-6 PRO

The Amprobe ACD-6 Pro digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and the diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 dig...

Manufacturer: Amprobe Brand: Amprobe Model: ACD-6 PRO

The Amprobe ACD-6 Pro digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and the diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 dig...

Manufacturer: American Standard Brand: Honeywell Model: L4006A1678 Color: Multicolored

The Honeywell Aquastat Controller for high or low limit applications, is an immersion type device used to limit or regulate the temperature of liquids in boilers, storage tanks and other applications where temperature control is required.

Manufacturer: KKmoon Brand: KKmoon Model: GM100 Color: yellow/red

Features & Functions:    1. Auto calibration to assure the accuracy.   2. Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer.     3. Make a quick adjustment for the sound velocity / thickness, and a quick recall to the stored data 4. Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not. 5. 10 thickness measurement storage and recall function available, which facilitates the height work or working in wild area.   6. Sound velocity measurement.   7. 12 sound velocity for different material which is also adjustable . 8. More than 10000 times long life keys. 9. Largr LCD display for easy readout. Specifications: LCD Digital display: 4 digits Measuring Range: 1.2~225mm(steel) Accuracy: ±(1%H+0.1)mm, H denotes the measured thickness. Working frequency: 5MHz Minimum display unit: 0.1 mm Mininum limit for tube measuring(steel): ?20 * 3.0mm(steel) Sound velocity Range: 1000~9999m/s,  When the given thickness is under 20mm, the accuracy is ±5%;  when the given thickness is over 20mm, the accuracy is: ±1% General Characteristics: Operation temperature/humidity: 0 to 40°C, ?90%RH Power supply: 3 * 1.5V AAA alkaline batteries (not included) Item Size: 15 * 8 * 3cm / 6 * 3 * 1.2in Item Weight: 222g / 7.8oz Package Size: 25.5 * 17.5 * 5cm / 10 * 6.8 * 2.0in Package Weight: 510g / 1.12lb Package List: 1 * Ultrasonic Thickness Gauge 1 * ?10mm 5HZ Transducer 1 * Coupling Agent 1 * 4mm Sampling Block 1 * Operating Manual