Electrical Testing - Page 604

Manufacturer: Fluke Corporation Brand: Fluke Model: 4116650

The Fluke 434-II BASIC Energy Analyzer (also called a power meter) can locate, predict, prevent, and troubleshoot power quality problems in single-phase and three-phase power distribution systems, to help facilities reduce electrical power consumption and to improve the performance of electro-mechanical equipment. The analyzer measures voltage, current, dips, swells, interruptions, harmonics, power, energy, frequency, inrush, and power inverter efficiency. It calculates the monetary cost of poor power quality and helps to pinpoint the origin of energy waste in a system. The logger function, activated by a button, allows user-configurable, long-term recording of minimum, maximum, and average readings for up to 150 parameters on all three phases and neutral. The USB port and cable (included) transfers data to a PC for trend and waveform data analysis in Power Log software (included). A live dashboard-style display of RMS voltage, harmonics, flicker, interruptions, rapid voltage changes, wells, unbalance, frequency, and mains signaling provides an overview of power system performance and, using color-coded bars, shows which parameters fall outside the limits. The analyzer can measure the efficiency of power inverters (such as in a solar generation system) by simultaneously measuring the DC and AC power of a system to determine how much power is lost in the conversion process. For additional capabilities and measurement details, refer to the users manual.The analyzer complies with International Electrotechnical Commission (IEC)/ European Union (EN) 61010-1-2001, IEC 61000-4-30 Class S, Canadian Standards Association (CSA) CAN/CSA C22.2 No 61010-1-04 (including cCSAus approval), and Underwriters Laboratories (UL) 61010-1. It is safety rated 600V Category IV 1000V Category III Pollution Degree 2. Industrial power meters are commonly used to test and evaluate power systems. SpecificationsNumber of voltage inputs4 (3 phase + neutral) DC-coupledNominal voltage range1V to 1000VMaximum input voltage1000V RMSNumber ...

Manufacturer: Megger Brand: Megger Model: DLRO200-115

The Megger DLRO200 series digital microhmmeter measures resistance in switch and breaker contacts, bus-bar joints, and other high-current electrical systems. The meter is autoranging and digital for safety and ease of use. The internal memory stores up to 300 sets of results, which can be annotated with notes by the user. The results and notes can be downloaded to a PC or directly outputted to a printer via the RS232 port. The microhmmeter measures resistance from 0.1 microhms to 1 ohm, with test currents from 10 to 200A. The unit is safety rated to European Standard EN61010-1. The DLRO200 series is used by electricians and electrical contractors.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. Meters measure electrical properties and are safety rated to measure a specific range of results. The range on the meter should be higher than the maximum anticipated value to be measured. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range. Megger manufactures equipment for cable fault l...

Manufacturer: Rigol Brand: Rigol Model: DSA832-TG

Rigol DSA832-TG Spectrum Analyzer, 9 kHz to 3.2 GHz (with tracking generator, factory installed) For design and development implementing Wi-Fi, Bluetooth, and other RF standards, the SSB Phase Noise down as low as -98 dBc/Hz at a 10 KHz offset empowers engineers to more accurately analyze modulations and noise surrounding their signals of interest. This becomes important for debugging and immunity testing of transceiver systems. The 7.5 GHz instrument enables engineers to investigate the 3rd harmonic of all of their critical 2.4 GHz applications while the 3.2 GHz models enable primary investigation of those signals as well as EMC measurements past the 3 GHz threshold. Additionally, resolution bandwidth settings down to 10 Hz means more precise visualization of low power RF signals. Whether you are still debugging your RF transceiver set, designing layout and configuration changes to maximize efficiency, or testing your system in noisy environments the DSA800 series spectrum analyzers will help you to quickly and easily identify and analyze your areas of concern. Rigol's new DSA800 series spectrum analyzers redefine the product category by setting new standards for performance and price. The DSA800 family features a unique widescreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production. The new spectrum analyzer offers the ability to measure smaller signals using our digital IF filter, which allows for smaller bandwidth settings and reduces displayed noise levels. The DSA815 also distinguishes between signals with a frequency difference as little as 100 Hz. The DSA832 and DSA875 have RBW settable down to 10 Hz and a DANL (displayed average noise level) down to -161 dBm (typical). In addition, Rigol offers great options including an EMI filter and quasi-peak detector kit, and tracking generator for all of these models

Manufacturer: Uxcell Brand: uxcell Model: a12073000ux0157

DESCRIPTION: easy connect to universal digital Multimeter standard jack. Perfect for testing electrical wiring circuits, Anti slip grip increased superior handling, ease of use. Specification: product name : Multimeter probe cat III : 1000V current : 20Atip Length (approx.) : 1.6cm/0.6Inch total Length (approx.) : 103.5cm/40.7Inch color : red, black weight : 64G package content 1 pair Multimeter probe .

Manufacturer: Silvertronic Brand: Silvertronic

Test Clips CLIP STEEL 5AMP BU-34

Manufacturer: Altera Brand: Altera

Altera EPF10K100EQ1240-2 Embeded Programme Logic Device

Manufacturer: URBEST Brand: URBEST®

Could be used either in a Digital or an Analog meter. Good quality, good performance and easily installation. Package Content: 1 x 100A 75mV DC Shunt Resistor

Manufacturer: MDFLY Brand: MDFLY

SOP16 On-board Test Clip

Manufacturer: Custom Cables Group LLC Brand: Custom Cables Group LLC

Alligator Clip to Banana Male Plug Test Lead Cables (US Stock; Fast Handling)

Manufacturer: NITBUY Brand: NITBUY

This anel Meter is specially designed for measuring current and monitoring battery & electrical system; # This meter offers users great simplicity and easily reading; The Analog Panel Meter is low power consumption and long lasting