Calibration - Page 258

Manufacturer: Flexbar Brand: Flexbar

Individual Precision Grade Gage Ball Size: 27mm. Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.

Manufacturer: ezMachineTools Brand: ezMachineTools

This precision 0-60º angle block has dimension of 4"x1-13/16"x1-3/16", angle of vee 90º, HCR 50-55, squareness of .0004"/0.01mm, angle vee of 90º and 0-60º adjustable angle by locking hex screw on the bottom.

Manufacturer: ezMachineTools Brand: ezMachineTools

This 90 degree V Block pair is 2-3/8 inch x 2-3/8 inch x 2 inch. It is made of high quality tool steel and completely hardened and ground. Square, parallelism, and center are all within 0.0002 inch. There are also side slots for easy clamping.

Manufacturer: Ohaus Brand: Ohaus Model: 80781119

The Ohaus metric, stainless steel, leaf-style, milligram precision calibration weight meets American Society for Testing and Materials (ASTM) Class 1 specifications, and is designed for calibrating other weights, or electronic balances and scales. The leaf-style weight has a turned-up end for lifting with tweezers and reducing handling and the risk of contamination or damage. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Ac...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614330-531

This Mitutoyo grade 0 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardi...

Manufacturer: Shark Brand: Shark Model: A9193

For mounting hub bed drums and rotors on 1-Inch and 1.875-Inch arbors. Covers passenger cars and light trucks. Our full line of Welding Supplies and Accessories include electrodes, wire, abrasives, wire wheels, accessories for cutting and welding; as well as helmets, goggles, glasses and face shields. We also offer welding blankets, screens, protective clothing and many other items which complement our welding line.

Manufacturer: Ohaus Brand: Ohaus Model: 80780336

The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...

Manufacturer: Fotronic Corporation Brand: Benchmark Scientific Model: W1000-500

Accuris Instruments offers a range of precision calibration weights that are ideal for calibration of your Accuris lab balances. The W1000-500 is the 500 gram weight and meets class F1 tolerance per OIML (International Organization of Legal Metrology) Recommendation R111. Made of highly polished, non-magnetic stainless steel, the W1000500 calibration weight comes in a protective plastic case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 10008

Manufacturer: Tramex Brand: Tramex Model: CALBOXMEP

Calibration Check Box to be used for MEP. Calibration Check Box. It is used with MEP. Trammel.