|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $162.80
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-585-075-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-585-075-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $163.91 26% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2358S-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2358S-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $164.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a yellow face, a 2mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays units in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ba...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $165.00 7% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783
|
The Mitutoyo 543-783 Absolute Digimatic electronic indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.0008". The LCD displays in both inches and metric units. This model has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or - 0.0008"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with lug backData outputYesDimensions103.9 x 59 x 27.5mm (H x W x D), not including lugShipping weight0.5lb.StandardsIP42Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Fre...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $165.00 12% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 196B6
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 196B6
Color: White
While there is a need for indicators with finer graduations. Antimagnetic models is also available. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $165.00 22% OFF
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4308970
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4308970
Mahr Federal 801 SGM MarTest 4308970, 0.0001" x ±0.004" Standard Test Indicator, 0-4-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $166.04 23% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-412T
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-412T
Mitutoyo Horizontal Test Indicator Set, Graduations: .0005", Range: .030", Dial Face: 0-15-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar, Comment: Long point.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $166.28 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7012-10
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7012-10
|
The Mitutoyo 7012-10 Magnetic Base indicator holder grips three ways, uses 132 lbs-force of magnetic pull for security, holds 6 mm, 8 mm, and 3/8†diameter rods, and has a push-button on/off switch for one-handed operation. The flexible neck reaches around oddly-shaped workpieces and into tight spaces where solid rods may not fit. The 58 x 55 x 50 mm base grips horizontally, vertically, and upside-down. For use with all Mitutoyo dial and dial test indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending through the base. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $169.00 6% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-425E
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-425E
Color: Yellow
|
The Mitutoyo 513 series dial test indicator has a white or yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The horizontal face is parallel to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, a yellow face that meets ANSI standards for metric indicators or white face, and double scale that is numbered both clockwise and counter-clockwise for reading in both directions.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking ...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $172.00 2% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 711MFSZ
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 711MFSZ
Color: White
|
The Starrett Series 711M Last Word dial test indicator has a balanced dial, a swiveling body, and metric measurements. The horizontal-face dial test indicator has a hard, chrome-plated, steel ratchet contact point for taking precise measurements in machining, layout, and inspection work. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. It has a balanced dial and a white face with half-yellow shading for accurate reading when used with a mirror or in a bore jig application. The positive reversing switch changes the reading direction. The indicator has a swiveling tubular body that can be mounted from the top or the body of the indicator using a body clamp, friction holder, or shank. The indicator has a jeweled lever action for smooth operation, and a replaceable contact point. This dial test indicator meets or exceeds accuracy and performance requirements of national and international standards, and is traceable to the United States National Institutes of Standards and Technology (NIST). This indicator includes a body clamp and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checkin...
|
|