|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $200.89 15% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 572-210-20
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 572-210-20
Mitutoyo Horizontal Digimatic Scale Unit, Range: 0 - 4", Resolution: .0005"/0.01mm, Output: Yes, Functions: Origin-set, Zero-setting, Power on/off, Presetting, Data hold, Data output, inch/mm conversion, Alarm: Low voltage, Counting value composition erro
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $206.95 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 64PKA075
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 64PKA075
Tool kit includes: dial indicator and magnetic base. Dial indicator range: 0-1" and resolution: 0.001". Magnetic base with 132 Lbf magnetic pull. Magnetic base with on/off switch. Tool kit comes in plastic case.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $212.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
|
The Brown & Sharpe TESA Compac series lever dial test indicator has a white face, a 4mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the white dial and contrasting black hand help make measurements easy to read. The compact, carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion. The ball-bearing lever system swivels through to 210 degrees. The dial face mounted at the top of the indicator parallel to the axis, and two universal dovetail mounts can be used for mounting from the top or back. Dovetail mounts provide a rigid setup. This indicator is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, includes a serial number, and an inspection report with a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, two 15mm long rigid stems (4mm and 8mm diameter), and inspection report with a declaration of conformity, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and ot...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $216.59 20% OFF
Manufacturer: STAKF
Brand: Starrett
Model: 657T
Manufacturer: STAKF
Brand: Starrett
Model: 657T
|
For use with all Starrett Test, Back-Plunger, AGD, Dial, and Miniature Dial Indicators. Also accommodates similar indicators of other manufacturers. The flexible post is an assembly of short tubular steel sections and precision ball joints, linked by an internal steel cable. It can be adjusted to any position and locked by turning a lever near the magnetic base. This makes it possible to use indicators in awkward places that are hard to reach with conventional holding devices. Assembled to the magnetic base, the post has a vertical reach of approximately 15" (380mm) and a horizontal reach of approximately 10" (250mm). The indicator snug on the end of the post can be rotated through 360 degree and locked in any position. The base has three precision ground magnetic contact surfaces. Grips horizontally, vertically or upside down. V-step holds base to arbors, shafts, chucks. Gauge Rod: 3/8" x 3" has 5/16, 1/4 and 7/32" steps, holds nos. 708, 709, 711 and 811 dial test indicators by body clamp.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $216.80 24% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-790B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-790B
12.7 mm, 0.001 mm, ID-S ABSOLUTE Digimatic Indicator, 8 mm stem, Flat Back, With SPC Data Output, ISO.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $217.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe 599-7746-1 Magnicator Magnetic Base indicator holder with magnetic bottom and two magnetic sides, grips three ways, has an on/off switch, swivel upright post, and is compatible with dial and dial test indicators. The simple on/off switch allows one-handed operation. The v-base grips to flat and rounded surfaces. The 1.9375 x 1.625 x 1.875 inch (H x W x D) base grips horizontally, vertically, and upside-down, with a 7†long swivel tool post that is 0.375†in diameter. (H is the vertical distance from lowest to highest point; W is the horizontal distance from left to right; D is the horizontal distance from front to back.) For use with all Brown & Sharpe dial and dial test indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending through the base. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $220.00 25% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 196A6Z
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 196A6Z
Color: White
While there is a need for indicators with finer graduations. Antimagnetic models is also available. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $225.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783BCAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783BCAL
|
The calibrated Mitutoyo 543-783BCAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or – 0.0008". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or – 0.0008"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData outp...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $225.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783CAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783CAL
|
The calibrated Mitutoyo 543-783CAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or – 0.0008". The LCD displays in both inches and metric units. This model has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or – 0.0008"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with lug backData outputYesDimensions103.9 x 5...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $226.30 27% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-402
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-402
|
The Mitutoyo 543-402 Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 0.9 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or - 0.001" with quantizing error of 1 countMeasuring force0.9N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter stemFaceBacklit LCD displays in both inches and metric units, green or red lighting displays go/no-go judgment, rotates 330 degrees, with lug backData outputYesDimensions117.8 x 59 x 36.4mm (H x W x D), not including lugShipping weight0.5lb.StandardsIP42Power sourceSR-44 battery (included...
|
|