|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $348.00 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-392B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-392B
|
The Mitutoyo 543-392B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" or 0.001mm, and an accuracy of + or - 0.0001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 1.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" or 0.001mmAccuracy+ or - 0.0001" with quantizing error of 1 countMeasuring force1.5N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter stemFaceBacklit LCD displays in both inches and metric units, green or red lighting displays go/no-go judgment, rotates 330 degrees, with flat backData outputYesDimensions117.8 x 59 x 36.4mm (H x W x D)Shipping weight0.6lb.StandardsIP42Power sourceSR-44 batte...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $351.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 312-3
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 312-3
Color: White
|
The Brown & Sharpe TESA Interapid 312 series dial test indicator has a white face, a 2mm stem diameter, and metric measurements. The white dial and contrasting black hand help make measurements easy to read, and the dial face rotates to allow horizontal and vertical measurements. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation and a revolution counter prevent plus or minus confusion. The ball-bearing lever system swivels through to 210 degrees. The dial face is mounted parallel to the insert's axis for mounting horizontally or vertically from the front, top, or back of the indicator. Dovetail mounts on the front and back provide a rigid setup, and a 4mm swiveling shank on the top of the indicator can be mounted at a range of angles. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a declaration of conformity. The set includes an Interapid 312 dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measur...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $354.50
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-402BCAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-402BCAL
|
The calibrated Mitutoyo 543-402BCAL Absolute Digimatic digital indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem/plate mounting. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. The measuring force is 0.9 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement record...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $354.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-402CAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-402CAL
|
The calibrated Mitutoyo 543-402CAL Absolute Digimatic digital indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a lug back for mounting from the rear of the indicator. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. The measuring force is 0.9 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital ...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $377.99 1% OFF
Manufacturer: BLAKE
Brand: BLAKE
Manufacturer: BLAKE
Brand: BLAKE
|
Looking for a faster and simpler way to center a workpiece, part or fixture? You just found it. This handy centering device works at any angle, horizontal or vertical, internal or external. Also works with NC, EDM and other hard-to-turn spindles. As the spindle rotates, the centering indicator face remains stationary and always faces the operator. That way, you free up both hands to accurately position the machine table. Use the Co-Ax Indicator with the machine spindle running, and centering conditions are closely simulated because the influence of power transmission, lubricant flow, bearing characteristics and torque are already integrated into the reading. Provides simplified method for centering workpiece or fixture on horizontal or vertical machines, external or internal diameters - also with NC, EDM and other hard to turn spindles. Includes (1) Indicator. (1) Internal feeler. (1) External feeler. (1) Restraining arm. (1) Fitted case. Weight: 9-1/2 oz. net Shipping weight: 1 lb. 14 oz. Internal capacity: 5/32" to 4-1/4" diameter External capacity: 0" to 4-1/4" diameter It is recommended that operating speed not exceed approximately 800 RPM.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $404.07 14% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-392BCAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-392BCAL
|
The calibrated Mitutoyo 543-392BCAL Absolute Digimatic digital indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. The measuring force is 1.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed a...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $409.00 28% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-472B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-472B
|
The Mitutoyo 543-472B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 1" (0 to 25.4mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0001". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set, and the result can be displayed in full-size characters. The face of the indicator can be rotated 330 degrees for reading from different directions. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem/plate mounting. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Additional functions for this indicator include origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 1.8 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with a SR-44 battery and lifting lever. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 1" (0 to 25.4mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.0001" with quantizing error of 1 countMeasuring force1.8N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter stemFaceBacklit LCD displays in both inches and metric units, green or red lighting displays go/no-go judgment, rotates 330 degrees, with flat backData outputYesDimensions168.5 x 59 x 42.5mm (H x W x D)Shipping weight0.7lb.StandardsIP42Power sourceSR-44 battery (included)H is height, t...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $414.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Magnetic measuring support with articulated arm, 390mm height. Magnetic base has 2 flat faces plus 1 prismatic one. The arm supports up to four pounds. Articulations made from duralumin. Disengageable permanent magnet. Dovetail clamp with a 8mm diameter clamping bore. Consisting of: articulated arm, clamp and magnetic base with fine adjust. ≈700 measuring force. V-Base for diameter 30 - 150mm. Magnetic base measures 60mm length by 50mm width by 55mm height. Mass: 1.45 kg or 1.85 kg.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $505.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-496B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-496B
Mitutoyo IDC Digimatic Indicator, Resolution: .0005"/0.01mm Range: 2", Stem diameter: 3/8", Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power On/Off, Data outpu
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $620.00 8% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-552A
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-552A
|
The Mitutoyo 543-552A ID-F ABSOLUTE Digimatic indicator gauge measures to 1†(25.4mm), has a backlit LCD digital readout with resolution of 0.00005/.0001/.0005/.001â€, or 0.001/0.01mm, and Go/+ or - No-go (NG) judgment with red and green backlighting. An indicator is an instrument that measures short, linear distances in mechanical engineering, machining, and manufacturing applications. This indicator gauge has Go/+ or - No-go (NG) judgment when upper and lower tolerances are set. Red backlighting indicates when judgment is out of tolerance, and green backlighting indicates when judgment is in tolerance. A backlit LCD digital readout displays measurements in inches or metric units. Maximum, minimum, or runout value can be displayed during measurement. An adjustable analog bar indicator is integrated to handle lower and upper limit approaching, and zero approaching for ease of operation. An electrostatic capacitance linear encoder helps prevent overspeed errors, which in turn helps ensure repeatable, precise measurement. Once the measurement reference point has been preset, it will not be lost when the power is turned on. Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately). Specifications Range 0 to 1.0†(0 to 25.4mm) Resolution 0.00005/.0001/.0005/.001â€/, or 0.001/0.01mm Accuracy + or - .00012â€, .003mm Quantizing error 1 count Measuring force 0 to 1.8 newtons (N) or less Contact point .16†(D) steel ball (4-48UNF) 900032 Display Backlit LCD digital in inches or metric units. Indicators Green or red backlighting displays GO/+ or -NG judgment indicators Functions Origin-set/preset, zero-set, GO/+ or - NG judgment, Max/min value hold, runout measurement, resolution switching, counting direction switching, power on/off, data output, inch/mm conversion Alarms Low-voltage, counting value composition error, over-flow error, ...
|
|