|
|
-
4.6 of 5.0 with 8 Reviews
SALE PRICE: $32.45 1% OFF
Manufacturer: Krebs
Brand: Krebs
Model: 12-508-201
Manufacturer: Krebs
Brand: Krebs
Model: 12-508-201
Insulation sleeve for container of Krebs LM3 hotCHOC sprayer. The sleeve keeps chocolate in the spare container warm and fluid.
-
4.6 of 5.0 with 34 Reviews
SALE PRICE: $82.84 1% OFF
Manufacturer: Jones Stephens
Brand: Jones Stephens
Manufacturer: Jones Stephens
Brand: Jones Stephens
JS 3-5/8" ID Self-Sealing Pipe Insulation, 3/8" Wall Thickness - I52358Features: 100% closed cell polyethylene UPS shippable cartons - CARTON QUANTITIES ONLY Complete seal on hot or cold pipe Two strips of self-adhesive mylar seal easily at any length 42 FT/BOX
-
4.6 of 5.0 with 9 Reviews
SALE PRICE: $128.08 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 21963H
Manufacturer: Megger
Brand: Megger
Model: 21963H
The Megger 2-piece lead set is a set of replacement test leads for conducting insulation resistance tests with a Megger 210170 or 210600 insulation tester (sold separately). The lead set includes two, 1.8m (6’) test leads. The 2-piece lead set is used to conduct insulation resistance tests with Megger 210170 and 210600 insulation resistance testers. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
4.6 of 5.0 with 47 Reviews
SALE PRICE: $135.60 1% OFF
Manufacturer: OUTEST
Brand: OUTEST
Manufacturer: OUTEST
Brand: OUTEST
-
4.6 of 5.0 with 24 Reviews
SALE PRICE: $149.99
Manufacturer: UNI-T
Brand: UNI-T
Manufacturer: UNI-T
Brand: UNI-T
Insulation Resistance Tester UT511 FEATURES: Low Battery Indication Data Logging: 18 Polarization Index(PI) Dielectric Absorption (DAR) LCD Backlight SPECIFICATIONS: Model: UT511 Insulation Resistance(?): Test Voltages: 100V/250V/500V/1000V 0%?20% ;100V 0.1M?~500M? ±(3%+5); 250V 0.5M?~2G? ±(3%+5); 500V 1M?~4G? ±(3%+5);1000V 2M?~10G? ±(3%+5) Short Circuit Current?
-
4.6 of 5.0 with 6 Reviews
SALE PRICE: $230.95 1% OFF
Manufacturer: B&K PRECISION
Brand: Materro(tm)
Manufacturer: B&K PRECISION
Brand: Materro(tm)
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $535.00
Manufacturer: Megger
Brand: Megger
Model: 242006-18
Manufacturer: Megger
Brand: Megger
Model: 242006-18
|
The Megger 242006 series duplex test lead with Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The Kelvin clip directs current through one jaw and potential through other jaw when taking resistance measurements on cables and small wires. It has a 1.5" (4 cm) jaw opening.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headqua...
-
4.6 of 5.0 with 42 Reviews
SALE PRICE: $560.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 6111-517
Manufacturer: Megger
Brand: Megger
Model: 6111-517
|
The Megger 6111 series two-piece duplex test lead set with spring-loaded duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, and BT51 digital microhmmeters. These duplex test leads measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The spring-loaded hand spikes compress to make contact with a conductor. Light-emitting diodes (LEDs) on one probe confirm connection and the presence of live current when used with the Megger DLRO10 microhmmeter, and can indicate test pass/fail when used with the Megger DLRO10X microhmmeter. There is 0.23" (6 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integri...
-
4.6 of 5.0 with 10 Reviews
SALE PRICE: $629.99 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: MG302-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: MG302-NIST
MultiMate/1000V Insulation Tester with Wireless PC interface (433MHz). Wireless USB interface transmits measurement data to a PC. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $660.38 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 1000-351
Manufacturer: Megger
Brand: Megger
Model: 1000-351
|
The Megger MIT400 series industrial insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in electrical systems. The autoranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature prevents testing when a circuit has a voltage of greater than 50V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.Specifications Automatic continuity testing range 0.01 to 100 Ohms (0-50 Ohms on analog range) Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 50V Power supply 5 AA alkaline or rechargeable batteries Weight 590g / 20.73oz. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 220 x 92 x 50mm / 8.66 x 3.63 x 1.97 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog for...
|
|