Insulation Resistance Meters - Page 10

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U1452A

The U1451A insulation resistance tester from the U1450A series is ideal for predictive and preventive maintenance measurement tasks in electrical and industrial applications. With its vast measurement capabilities, efficient automated report generation and high durability, you can accomplish more in a day's work.

Manufacturer: Megger Brand: Megger Model: 242021-18

The Megger 242021 series potential test lead set includes one red and one black test lead with single hand spikes for use with compatible Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible current test leads, the Megger 242021 series potential test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: MEGGER Brand: Megger

External Depth: 78mm. External Height: 148mm. External Width: 203mm. External Width: 203mm. Insulation Test Resistance: 10kohm to 999Mohm. Insulation Test Resistance: 10kohm to 999Mohm. Insulation Tester Type: Analogue / Digital Megohmmeter. Insulation Tester Type: Analogue / Digital Megoh. Insulation Testing Voltage: 250V, 500V, 1kV. Insulation Testing Voltage: 250V, 500V, 1kV. Operating Temperature Max: 60C. Operating Temperature Min: -10C. Operating Temperature Min: -10C. Operating Temperature Range: -10C to +60C. Operating Temperature Range: -10C to +60C. RoHS Compliant: NA. SVHC: No SVHC (19-Dec-2012). Weight: 980g

Manufacturer: Megger Brand: Megger Model: 242003-7

The Megger 242003-7 duplex test lead with replaceable needlepoint tips is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, and 247002 digital low-resistance ohmmeters. This 7' (2 m) long duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The lead has needlepoint tips on both the current and potential leads that are for use with small and hard-to-reach conductors and can be replaced when they show signs of wear.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is hea...

Manufacturer: AEMC Brand: AEMC Model: 5060

The AEMC 5060 digital megohmmeter with RS-232 interface is an insulation tester with four preset test voltages—500, 1,000, 2,500, and 5,000V—as well as user-adjustable test voltages from 40 to 5,100V for measuring insulation resistance to 10TΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures capacitance to 50μF, leakage current to 3 milliamperes (mA), and AC and DC voltage to 1,000V, indicating when a voltage greater than 25V is detected. The meter can be adjusted to inhibit testing when a voltage of 3, 10, or 20% of test voltage is detected. The R-DAR-PI–DD (resistance-dielectric absorption rate-polarization index-dielectric discharge) function calculates and displays the DAR and the PI, which are resistance measurements over time, and DD, which detects excess discharge current, to provide a detailed indication of insulation condition. The timer function allows timed testing from 1 to 60 minutes. High and low thresholds for insulation and resistance measurements can be set, triggering an alarm when readings fall outside the settings, and will be retained even after the meter is powered off. When measurement is complete, the meter enters voltage detection mode and automatically discharges residual voltage from the circuit under test. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. With its RS-232 interface and software, the meter can be used with a PC for configuring the meter, storing and analyzing data, and generating reports. Its document function allows printing of a preformatted report directly to a compatible printer. It has 128kB of memory for storing readings. Built into a double-insulated, dual-walled field case, the meter has a dual 4,000-count LCD with a backlight for visibility in low light. The display shows readings numerically and on a 33-segment bar graph. Insulations meters are commonly used for elect...

Manufacturer: Duoyi Brand: Yi Duo Model: DY3166

Features:Measure insulation resistance to 2000M¦¸AC voltage measurement to 600VLow battery warningComplete with test leads, heavy duty carry casePackage includes:1 * DY3166 Analog Insulation Resistance Tester1 * Gift box

Manufacturer: Duoyi Brand: Yi Duo Model: DY30-2

Features: Three test voltages, measure insulation resistance to 20G¦¸ AC voltage measurement to 600V Low resistance buzzer Data hold, auto range Low battery warning Complete with test leads, heavy duty carry case Package includes: 1 * DY30-2 Insulation Resistance Tester 1 * Accessory kit (Insulation Test Leads and Leather Case) 1 * Gift Box

Manufacturer: Generic Brand: UNI-T

Generic Insulation Resistance Tester UT511 FEATURES: Low Battery Indication Data Logging: 18 Polarization Index(PI) Dielectric Absorption (DAR) LCD Backlight SPECIFICATIONS: Model: UT511 Insulation Resistance(?): Test Voltages: 100V/250V/500V/1000V 0%?20% ;100V 0.1M?~500M? ±(3%+5); 250V 0.5M?~2G? ±(3%+5); 500V 1M?~4G? ±(3%+5);1000V 2M?~10G? ±(3%+5) Short Circuit Current?

Manufacturer: Zytree Brand: Zytree

Features: Display Count: 2000 Automatic measurement: ¡Ì Low Battery Indication: ¡Ì LCD Backlight: ¡Ì Alarm Light Display: ¡Ì Alarm Buzzer: ¡Ì High Voltage Indication: ¡Ì Over Load Indication: ¡Ì Auto Disharge: ¡Ì Test Voltage Vice Display: ¡Ì 10M? Internal Resistance Test: ¡Ì Specifications: Model: UT501A Insulation Resistance(): Test Voltage: 100V/250V/500V/1000V 0%~10% Load Current: 50V(R=50K) 1mA 0%~10% ; 100V(R=100K?) 1mA 0%~10% ; 250V(R=250K?) 1mA 0%~10% 500V(R=500K?) 1mA 0%~10% ; 1000V(R=1M?) 1mA 0%~10% Short Circuit Current:

Manufacturer: Megger Brand: Megger Model: 242005-7

The Megger 242005-7 duplex test lead with silver-plated Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This 7' (2 m) long duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The Kelvin clip is silver-plated for low contact resistance. The Kelvin clip directs current through one jaw and potential through other jaw when taking resistance measurements on cables and small wires. It has a jaw opening of 0.5" (1.3 cm).A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand na...