Insulation Resistance Meters - Page 7

Manufacturer: Megger Brand: Megger Model: 242041-18

The Megger 242041 series current test lead set includes one red and one black test lead with terminal clips for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible potential leads, the Megger 242041 series current test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The leads have a maximum test current input of 10 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardizatio...

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U1453A

The U1451A insulation resistance tester from the U1450A series is ideal for predictive and preventive maintenance measurement tasks in electrical and industrial applications. With its vast measurement capabilities, efficient automated report generation and high durability, you can accomplish more in a day's work.

Manufacturer: GW Instek Brand: GW Instek Model: GPT-9612

GW Instek launches new economical safety testers, the GPT-9600 Series, to support routine tests of major items of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations.The GPT-9600 Series is built upon a platform of 100VA AC maximum power output. The GPT-9603 is a 3-in-1 model capable of performing AC withstanding, DC withstanding and insulation resistance tests. The GPT-9612 is capable of performing AC withstanding and insulation resistance tests. The GPT-9602 is capable of performing AC and DC withstanding tests, and GPT-9601 is able to perform AC withstanding test. The GPT-9600 Series is equipped with the high-efficiency PWM amplifier, which is the core of the platform design to impede the influence from the input AC voltage fluctuation and ensure a stable voltage output.Following a tidy and easy-to–use design concept, the GPT-9600 Series render users an intuitive operation environment by a simple and clear panel layout, a large LCD display and color LED indicators. The switching power supply, used as a universal input source. The GPT-9600 series, equipped with the same output voltage function as that of all GW Instek Safety Testers, indicates the expected output voltage before high voltage tests are applied. Furthermore, an AUTO mode, including test sequence selections of withstanding-then-insulation or insulation-then-withstanding, is designed for models carrying insulation Resistance test function to reduce the testing time of dual test items.Other functions and features of GPT-9600 include: the zero crossing turn-on operation protects DUT from the impact of surge voltage output, the interlock function safeguards users from the hazardous shock of unintentional touch of the voltage output, a remote output on-off terminal in the front panel and a signal I/O port in the rear panel are provided as the means for remote start/stop control of the safety tester.

Manufacturer: Megger Brand: Megger Model: 45553EL-AMZN

The Megger industrial insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in electrical systems. The auto ranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature prevents testing when a circuit has a voltage of greater than 50V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.

Manufacturer: MEGGER Brand: Megger Model: MIT410-EN

MEGGER - MIT410-EN - INSULATION TESTER; 1000V; 100GOHM

Manufacturer: Megger Brand: Megger Model: 6111-429

The Megger DLRO10 series digital microhmmeter measures resistance in switch and contact breakers, bus-bar and cable joints, battery systems, resistive components, and other electrical component links. The meter is autoranging and digital for safety and ease of use. The auto current reversal function cancels out thermal electromagnetic fields (EMFs) for more accurate test results. The unit has a noise limit set at 100mV. An indicator light illuminates when the noise limit has been exceeded. The unit automatically measures continuity when it is connected to a circuit. The DLRO10 series is used by electricians and electrical contractors.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. Meters measure electrical properties and are safety rated to measure a specific range of results. The range on the meter should be higher than the maximum anticipated value to be measured. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range. Megger manufactures equipment for cable fault locating, prot...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1550C

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: OUTEST Brand: OUTEST

Manufacturer: PEAKMETER Brand: PEAKMETER

Specifications: Multimeter functions: DC Voltage Test:0.1~1000V±0.5% AC Voltage Test:0.1 - 750V ±1% Continuity Test:0.01Ω - 200Ω ±0.5% Insulation Test: Source Output Voltage-------------------Measuring Range 50V( 0 % - 20%)------------------------0.01MΩ - 50MΩ±(3%+5) 100V( 0% - 20%)----------------------0.01MΩ - 100MΩ±(3%+5) 250V( 0% - 20%)----------------------0.01MΩ - 250ΩM±(3%+5) 500V( 0% - 20%)---------------------0.01MΩ - 500MΩ±(3%+5)/1.00GΩ - 5.00GΩ±(5%+0.1GΩ) 1000V( 0% - 20%)--------------------5.00GΩ - 10.00GΩ ±(10%+0.2GΩ) Short Circuit Current:1.8mA Safety Rating :CE ETL CAT III 1000V. CAT IV 600V RoHS Package content:1X InsulationTester MS5203;2XTest lead; 2XClips:1X User's manual;1XCarry case

Manufacturer: tekit Brand: tekit Color: RED/BLACK

Specifications: Model-GM3123 Rated Voltage: 250V/500V/1000V/2500V Testing Range: 250V:0.0~499MΩ;500V:0.0~999MΩ;1000V:0.0~19.9GΩ;2500V:0.0~99.9GΩ Accuracy: ±5%rdg DC/AC Testing: 30~600V Resolution: 1.0V Overload Protection: AC 1200V/10 Withstand Voltage: AC8320V/5 Insulation Resistance: 1000MΩ/DC1000V Short Circuit Current: 1.3mA Operation Voltage: 12V Power supply:8 * 1.5V LR14 Battery(not included) Notice:we have to take off the battery due to the policy of the shipping company Features: 1.Auto discharge function to make the operation safe 2.Live circuit warning symbols with audio sounds 3.Anto power off function (in 10 minutes without operation) 4.Timer measurement function 5.Low battery indication Package Content: Proudct Size 220*153*96mm Proudct Weight 1105g Outer box Size (1pcs) 31*25.5*14cm Iner box weight(1pcs) 2.9kg Package List 1*Insulation Resistance Tester 1 x English Manual