Insulation Resistance Meters - Page 8

Manufacturer: TES Instruments Brand: TES Instruments Model: TES-3660

Product Features: Large LCD with analog bar graph and digital display, 250V, 500V, 1000V output voltage for insulation M Ω testing, 4000M Ω insulation testing with automatically switch to voltage measurement, Lo Ω function for testing connections, Auto discharge of capacitive voltage charges, Last reading HOLD display, AC/DC voltage measurement up to 1000V, Manual data memory and read function (9 sets), Meets EN61557 and IEC1010-1, CAT III 1000V, Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H).

Manufacturer: Yokogawa Electric Corporation Brand: Yokogawa Model: MY10-03

The Yokogawa analog megohmmeter is an insulation tester with a single test voltage for measuring insulation resistance to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures AC voltage and lights an LED to indicate that a circuit is live. When measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The meter has a battery voltage check that indicates the condition of the batteries. It is rated for category (CAT) III installations, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It comes with a line probe, an earth probe, a display cover, a shoulder strap, four AA batteries, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsAvailable test voltage/insulation resistance ranges125V/20MΩ; 250V/50MΩ; 500V/100MΩ; 500V/1,000MΩ; 1,000V/2,000MΩMaximum AC voltage measured250V for 125V/20MΩ model; 300V for 250V/50MΩ model; 500V for other modelsInstallation categoryCAT IIIStandards metEN safety standards 61010-1:1993 and 61010-2-031:1995; CE markingPower(4) AA batteriesWeight500gDimensions (H x W x D)*103 x 125 x 53mm*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Megohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degraded insulation and improper circuit connections in equipment, wiring, and power supplies. Resistance is an indicator of the overa...

Manufacturer: UEi Brand: UEi Test Instruments Model: IRT20 Color: Blue

The UEi IRT20 Insulation Resistance Tester is designed to be an affordable, rugged, hand-cranked Megohmeter, Use the UEi IRT20 to check motor and generator windings, power transformers, and electrical lines. The UEi IRT20 is designed with a heavy-duty construction so that it can be used in a variety of applications, even in harsh environments. The integral Guard Terminal and Guard Circuit allows unwanted leakage current to bypass the meter circuit. The UEi IRT20 includes 1000, 500 and 250 V ranges. The standard damping time is better than 4 seconds.

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: IM75

The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment. TA81 CAT IV Silicone Insulated Test Probes with screw on insulated alligator clips, TA50 Magnetic hanging strap, 6 x AAA batteries, and User manual/CD included.

Manufacturer: Megger Brand: Megger Model: 1001-368

The Megger MIT400 series telecom and CATV digital/analog insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in telecom and CATV installations. The autoranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature to prevent testing when a circuit has a voltage of greater than 75V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.Specifications Automatic continuity testing range 0.01 to 100 Ohms (0-50 Ohms on analog range) Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Power supply 5 AA alkaline or rechargeable batteries Weight 590g / 20.73oz. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 220 x 92 x 50mm / 8.66 x 3.63 x 1.97 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters displa...

Manufacturer: Besantek Brand: Besantek

The BESANTEK BST-IT22 Insulation Tester Designed to Check Wires or Cables Insulation if it is Acceptable or Not. EnerSave feature to extend battery life.. 2 Lines × 16 characters large LCD.. Low battery consumption.. Low battery indicator.. Overload protection.. Auto-off.. Show test time duration (up to 99.9s) for easy comparison.. EEPROM calibration.. Technical Specifications: . Test voltage (DC V) : 1kV / 2.5kV / 5kV / 10kV.. Measuring ranges (Auto-Ranges): 0-50GOhm / 0-125GOhm / 0-250GOhm / 0-500GOhm.. Accuracy: 0-50GOhm : ±3% / 50-500GOhm : ±5% .. Power source: 1.5V(AA) battery × 8.. Safety Standard: EN 61010-1 CAT III / EN 61326-1 .

Manufacturer: GW Instek Brand: GW Instek Model: GPT-9603

GW Instek launches new economical safety testers, the GPT-9600 Series, to support routine tests of major items of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations.The GPT-9600 Series is built upon a platform of 100VA AC maximum power output. The GPT-9603 is a 3-in-1 model capable of performing AC withstanding, DC withstanding and insulation resistance tests. The GPT-9612 is capable of performing AC withstanding and insulation resistance tests. The GPT-9602 is capable of performing AC and DC withstanding tests, and GPT-9601 is able to perform AC withstanding test. The GPT-9600 Series is equipped with the high-efficiency PWM amplifier, which is the core of the platform design to impede the influence from the input AC voltage fluctuation and ensure a stable voltage output.Following a tidy and easy-to–use design concept, the GPT-9600 Series render users an intuitive operation environment by a simple and clear panel layout, a large LCD display and color LED indicators. The switching power supply, used as a universal input source. The GPT-9600 series, equipped with the same output voltage function as that of all GW Instek Safety Testers, indicates the expected output voltage before high voltage tests are applied. Furthermore, an AUTO mode, including test sequence selections of withstanding-then-insulation or insulation-then-withstanding, is designed for models carrying insulation Resistance test function to reduce the testing time of dual test items.Other functions and features of GPT-9600 include: the zero crossing turn-on operation protects DUT from the impact of surge voltage output, the interlock function safeguards users from the hazardous shock of unintentional touch of the voltage output, a remote output on-off terminal in the front panel and a signal I/O port in the rear panel are provided as the means for remote start/stop control of the safety tester.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4692716

The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications. Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1% - 3% of revenue (potentially 30% - 40% of profits) annually.

Manufacturer: Megger Brand: Megger Model: 242004-30

The Megger 242002 series duplex test lead with C-clamp is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 2" (5 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger...

Manufacturer: Megger Brand: Megger Model: 6410-867

The Megger 212000 series insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and electrical testing. The average-sensing meter help provide accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. This analog meter has manual range selection for flexibility of use and a guard terminal to eliminate surface current leakage. Selectable test currents allow use in a variety of applications. The tester is safety rated to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger 212000 series is commonly used by electricians and electrical contractors.Specifications Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Weight 1kg / 2.3 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat II 300V, Cat I 600V Dimensions 130 x 125 x 180mm / 5.1 x 4.9 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has...