|
|
-
4.5 of 5.0 with 29 Reviews
SALE PRICE: $455.05 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2135.35
Manufacturer: AEMC
Brand: AEMC
Model: 2135.35
|
The AEMC 2135.35 kit provides the accessories needed for setup and teardown in the field when performing 3-point ground resistance testing with an AEMC meter (sold separately). The leads are color-coded according to length. The kit includes two 150ft. leads on spools (one red, one blue), one 30ft. lead (green), and two 5ft. leads (one red, one blue). Also provided are two 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, and a 100ft. tape measure. The tape measure housing has a hand-crank for rewinding the tape after use and a handle with a rubber grip. The kit includes a carrying bag that holds all of the accessories, keeping them organized and available when needed. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA. What’s in the Box? AEMC 2135.35 Ground test kit for 3-point testing (2) 150ft. leads on spools (red/blue) 30ft. lead (green) (2) 5ft. leads (red/blue) (2) 14.5" T-shaped auxiliary ground electrodes (5) spaded lugs 100ft. AEMC tape measure Carrying bag
-
4.5 of 5.0 with 7 Reviews
SALE PRICE: $549.95 9% OFF
Manufacturer: FLIR Systems, Inc.
Brand: FLIR
Model: IM75
Manufacturer: FLIR Systems, Inc.
Brand: FLIR
Model: IM75
The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment. TA81 CAT IV Silicone Insulated Test Probes with screw on insulated alligator clips, TA50 Magnetic hanging strap, 6 x AAA batteries, and User manual/CD included.
-
4.5 of 5.0 with 17 Reviews
SALE PRICE: $598.99
Manufacturer: NF Corporation
Brand: NF
Manufacturer: NF Corporation
Brand: NF
Measurement frequency : ≤ 100 kHz
-
4.5 of 5.0 with 41 Reviews
SALE PRICE: $599.00
Manufacturer: Gometer
Brand: Gowe
Manufacturer: Gometer
Brand: Gowe
|
Digital Clamp-on Ground Resistance tester DY1000A is a major breakthrough in traditional grounding resistance measurement. It is widely used in the grounding resistance measurement of the power, telecommunications, meteorology, oilfield, construction and the industrial and electrical equipment.
DY1000A in the measurement of a grounding system with loop, does not require breaking down the grounding wire, and need no auxiliary electrode. It is safe, fast and simple in use.
It can measure out the faults beyond the reach of the traditional methods, and can be applied in the occasions not in the range of the traditional methods. DY1000 can measure the integrated value of the grounding body resistance and the grounding lead resistance.
DY1000 are equipped with either a long jaw or a short jaw, as indicated in the figure below. A long jaw is particularly suitable for the occasion of grounding with the flat steel.
Specifications
Clamp-on Ground Resistance tester
Earth Ground Resistance Range Resolution Precision
0.01Ω ~ 0.99Ω 0.01Ω ±1%+0.01Ω
1.0Ω ~ 49.9Ω 0.1Ω ±1.5%+0.1Ω
50.0Ω ~ 99.5Ω 0.5Ω ±2%+0.5Ω
100Ω ~ 199Ω 1Ω ±3%+1Ω
200Ω ~ 395Ω 5Ω ±6%+5Ω
400Ω ~ 590Ω 10Ω ±10%+10Ω
600Ω ~ 1000Ω 20Ω ±20%+20Ω
Min. Resolution 0.01Ω
Configurable alarm value of resistance 0 ~ 199Ω
Memory 99 sets
Conductor Size 32 * 55 mm
Working Temperature -10°C ~ 55°C
Working Humidity 10%~80%
LCD Size 28.5 x 47 mm
General Characteristics
Power AA1.5Vx4
Product Size 285*90*60 mm
Product Net Weight 1320g(including battery)
Standard Accessories
Standard individual packing carry case
Standard Quantity per Carton 6 pcs.
Measurement of Standard Carton 645*360*276mm (0.064 CBM)
Gross weight of Standard Carton 12kgs
***Don't buy others' fakes. Only buy from Gowe Industrial can enjoy after-care service.***
-
4.5 of 5.0 with 45 Reviews
SALE PRICE: $657.99
Manufacturer: NF Corporation
Brand: NF
Manufacturer: NF Corporation
Brand: NF
-
4.5 of 5.0 with 48 Reviews
SALE PRICE: $735.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 1001-368
Manufacturer: Megger
Brand: Megger
Model: 1001-368
|
The Megger MIT400 series telecom and CATV digital/analog insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in telecom and CATV installations. The autoranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature to prevent testing when a circuit has a voltage of greater than 75V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.Specifications Automatic continuity testing range 0.01 to 100 Ohms (0-50 Ohms on analog range) Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Power supply 5 AA alkaline or rechargeable batteries Weight 590g / 20.73oz. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 220 x 92 x 50mm / 8.66 x 3.63 x 1.97 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters displa...
-
4.5 of 5.0 with 13 Reviews
SALE PRICE: $779.99 1% OFF
Manufacturer: T&O
Brand: Toto
Manufacturer: T&O
Brand: Toto
DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.
-
4.5 of 5.0 with 12 Reviews
SALE PRICE: $809.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: EI-1625
Manufacturer: Fluke Corporation
Brand: Fluke
Model: EI-1625
The Fluke clip-on current transformer clamp set is used to perform selective or stakeless testing with the Fluke 1625 earth ground tester. Selective testing uses one clamp and stakes to measure earth ground loop resistance values for one ground electrode. Stakeless testing uses two clamps to test ground loop resistance. Both the selective and stakeless methods eliminate the need to disconnect the electrode from the grounding system for increased safety and fewer testing steps. One clamp is voltage inducing, and the other clamp is current sensing. Both clamps have a 50.8mm/2" inside diameter. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
-
4.5 of 5.0 with 45 Reviews
SALE PRICE: $850.99
Manufacturer: Besantek
Brand: Besantek
Manufacturer: Besantek
Brand: Besantek
The BESANTEK BST-IT22 Insulation Tester Designed to Check Wires or Cables Insulation if it is Acceptable or Not. EnerSave feature to extend battery life.. 2 Lines × 16 characters large LCD.. Low battery consumption.. Low battery indicator.. Overload protection.. Auto-off.. Show test time duration (up to 99.9s) for easy comparison.. EEPROM calibration.. Technical Specifications: . Test voltage (DC V) : 1kV / 2.5kV / 5kV / 10kV.. Measuring ranges (Auto-Ranges): 0-50GOhm / 0-125GOhm / 0-250GOhm / 0-500GOhm.. Accuracy: 0-50GOhm : ±3% / 50-500GOhm : ±5% .. Power source: 1.5V(AA) battery × 8.. Safety Standard: EN 61010-1 CAT III / EN 61326-1 .
-
4.5 of 5.0 with 1 Reviews
SALE PRICE: $1,105.00 1% OFF
Manufacturer: AIM-TTI INSTRUMENTS
Brand: TTI
Model: LCR400
Manufacturer: AIM-TTI INSTRUMENTS
Brand: TTI
Model: LCR400
AIM-TTI INSTRUMENTS LCR400 LCR METER 0.1% BASIC ACCURACY
|
|