Capacitance & Resistance Meters - Page 27

Manufacturer: Sperry Brand: Sperry Top-Sider

Sperry 4102MOV Analog Earth Resistance Tester.

Manufacturer: Megger Brand: Megger Model: 250581

The Megger 250581 deluxe ground testing kit is a kit for conducting ground resistance tests with a Megger DET3 or DET4 series ground resistance tester (sold separately). The kit includes three color-coded test leads 8, 15, and 30m (25’, 50’, and 100’) long, two 51cm (20”) ground rods, and a padded canvas case for the instrument, leads, and rods. The 250581 is an accessory used to perform ground resistance tests with Megger DET3 and DET4 series ground resistance testers.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: AGILENT TECHNOLOGIES Brand: Agilent Technologies

AGILENT TECHNOLOGIES U1733C HANDHELD LCR METER, 184 x 87 x 41mm, 37g

Manufacturer: Peakmeter Brand: PEAKMETER

Product Description: The grounding resistance can be safely and quickly measured by champing the grounding wires or the grounding rods only with the jaws. The pincerlike grounding resistance tester further can be used for measuring the current, the highly sensitive jaws of the tester can measure the leakage current which is low to 1mA and the current of the neutral line which is up to 40A RMS. This function is very important when measuring the grounding network which has large noise and harmonic wave influencing the power quality. Except to be used in industrial electrical equipment, the tester is widely applied to power distribution, configuration of telecommunications system, building grounding, etc. Product Feature: Auto ranging: √ Jaw opening: 45mm x 32mm/1.8"x1.3 Data logging And recall: 99 groups Alarm Limit Setting Setting Alarm threshold ln 1Ω to 100Ω LBD: Low Battery Display Data Hold: √ Display: LCD 3 3/4 digits Product Specification: Resistance: 0.01Ω～0.999Ω ±(1.5%+0.01Ω) 0.001Ω IΩ～9.99Ω ±(1.5%+0.1Ω) 0.01Ω 10Ω～99.9Ω ±(2.0%+0.3Ω) 0.1Ω 100Ω～199.9Ω ±(3.0%+1Ω) 1Ω 200Ω～400Ω ±(6.0%+5Ω) 5Ω 400Ω～600Ω ±(10%+10Ω) 10Ω 600Ω～1200Ω approx.20% 20Ω Current: 100mA ±(2.5%+1mA) 0.1mA 300mA ±(2.5%+2mA) 0.3mA 1A ±(2.5%+0.003A) 0.001A 3A ±(2.5%+0.01A) 0.003A 10A ±(2.5%+0.03A) 0.01A 20A ±(2.5%+0.05A) 0.03A Power Supply: NI-MH 600mAh 1.2V x 6AAA Product Size: 54mmx104mmx276mm(2.1"x4.1"x10.9'') Product Weight: 1050g(231lb) Category: CE ETL CAT.Ⅱ600V Packing Size: 370*323*140mm Packing weight: 2540g Package include: 1*MS2301 EARTH RESISTANCE CLAMP TESTER 1*Colorful Box 1*User Manual 1*Plastic Bag 1*Meter Box 1*Clean Cloth

Manufacturer: Besantek Brand: Besantek

EnerSave feature to extend battery life. . 2 Lines × 16 characters large LCD.. Low battery consumption.. Low battery indicator.. Overload protection.. Auto-off. . Show test time duration (up to 99.9s) for easy comparison.. EEPROM calibration.. Technical Specifications: . Test voltage (DC V): 0.5kV / 1kV / 2.5kV / 5kV.. Measuring ranges (Auto-Ranges): 0-25GOhm / 0-50GOhm / 0-125GOhm / 0-250GOhm.. Accuracy: 0-50GOhm : ±3% / 50-250GOhm : ±5% .. Power source: 1.5V(AA) battery × 8 .. Safety Standard: EN 61010-1 CAT III / EN 61326-1.

Manufacturer: Megger Brand: Megger Model: MIT400-EN

Purchase $100.00 or more worth of Megger products and receive a FREE Ram Meter Inc./Megger coffee mug. Add it to your order below. (while supplies last)The new Megger MIT400 Series insulation and continuity testers has been designed for electrical testing by power utilities, industrials, telecommunication companies, commercial/domestic electricians and anyone with unique test voltage requirements. The wide range of features also makes the MIT400 Series ideal for maintenance technicians and engineers. They replace the well-established BM400 insulation tester range, giving greater functionality with simplified operation, greater application range and increased safety.Features: MIT400: 250V, 500V and 1000V Ranges Insulation testing up to 1000 V and 200 GOhm Patented analog arc and dual digital display CAT IV 600 V rating TRMS & DC Voltage measurement Continuity testing at 200 mA or 20 mA down to 0.01 Pass/Fail limit alarms PI/DAR and Timer function Three year product warranty IP54 rated**SALES NOTE**The MIT400 Series replaces the old BM400, BM80/2, BMM502, BM2000 & BM2500 seriesFREE Ram Meter Inc./Megger Coffee Mug w/$100.00+ order!

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U1452A

The U1451A insulation resistance tester from the U1450A series is ideal for predictive and preventive maintenance measurement tasks in electrical and industrial applications. With its vast measurement capabilities, efficient automated report generation and high durability, you can accomplish more in a day's work.

Manufacturer: Megger Brand: Megger Model: 242021-18

The Megger 242021 series potential test lead set includes one red and one black test lead with single hand spikes for use with compatible Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible current test leads, the Megger 242021 series potential test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: MEGGER Brand: Megger

External Depth: 78mm. External Height: 148mm. External Width: 203mm. External Width: 203mm. Insulation Test Resistance: 10kohm to 999Mohm. Insulation Test Resistance: 10kohm to 999Mohm. Insulation Tester Type: Analogue / Digital Megohmmeter. Insulation Tester Type: Analogue / Digital Megoh. Insulation Testing Voltage: 250V, 500V, 1kV. Insulation Testing Voltage: 250V, 500V, 1kV. Operating Temperature Max: 60C. Operating Temperature Min: -10C. Operating Temperature Min: -10C. Operating Temperature Range: -10C to +60C. Operating Temperature Range: -10C to +60C. RoHS Compliant: NA. SVHC: No SVHC (19-Dec-2012). Weight: 980g

Manufacturer: Megger Brand: Megger Model: 242003-7

The Megger 242003-7 duplex test lead with replaceable needlepoint tips is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, and 247002 digital low-resistance ohmmeters. This 7' (2 m) long duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The lead has needlepoint tips on both the current and potential leads that are for use with small and hard-to-reach conductors and can be replaced when they show signs of wear.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is hea...