|
|
-
4.4 of 5.0 with 31 Reviews
SALE PRICE: $1,010.00
Manufacturer: Megger
Brand: Megger
Model: 242003-7
Manufacturer: Megger
Brand: Megger
Model: 242003-7
|
The Megger 242003-7 duplex test lead with replaceable needlepoint tips is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, and 247002 digital low-resistance ohmmeters. This 7' (2 m) long duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The lead has needlepoint tips on both the current and potential leads that are for use with small and hard-to-reach conductors and can be replaced when they show signs of wear.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is hea...
-
4.4 of 5.0 with 49 Reviews
SALE PRICE: $1,069.00 1% OFF
Manufacturer: HWN
Brand: HWN
Manufacturer: HWN
Brand: HWN
Features: 1. Gluing material thickness is adjustable from 0.1mm to 2mm. 2. Any water-soluble glue can be used in this machine, like while glue. 3. Glue width: 0 - 270mm 4. Glue time: 10m/min 5. Voltage: 110V/220V 50Hz 6. Power: 250W 7. Size: 705 * 300 * 280mm 8. Weight: 26.5kg 9. This machine is made of strong metal and high quality. Roller is made of stainless steel. Lasting and durable.
-
4.4 of 5.0 with 24 Reviews
SALE PRICE: $2,982.00 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 5060
Manufacturer: AEMC
Brand: AEMC
Model: 5060
|
The AEMC 5060 digital megohmmeter with RS-232 interface is an insulation tester with four preset test voltages—500, 1,000, 2,500, and 5,000V—as well as user-adjustable test voltages from 40 to 5,100V for measuring insulation resistance to 10TΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures capacitance to 50μF, leakage current to 3 milliamperes (mA), and AC and DC voltage to 1,000V, indicating when a voltage greater than 25V is detected. The meter can be adjusted to inhibit testing when a voltage of 3, 10, or 20% of test voltage is detected. The R-DAR-PI–DD (resistance-dielectric absorption rate-polarization index-dielectric discharge) function calculates and displays the DAR and the PI, which are resistance measurements over time, and DD, which detects excess discharge current, to provide a detailed indication of insulation condition. The timer function allows timed testing from 1 to 60 minutes. High and low thresholds for insulation and resistance measurements can be set, triggering an alarm when readings fall outside the settings, and will be retained even after the meter is powered off. When measurement is complete, the meter enters voltage detection mode and automatically discharges residual voltage from the circuit under test. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. With its RS-232 interface and software, the meter can be used with a PC for configuring the meter, storing and analyzing data, and generating reports. Its document function allows printing of a preformatted report directly to a compatible printer. It has 128kB of memory for storing readings. Built into a double-insulated, dual-walled field case, the meter has a dual 4,000-count LCD with a backlight for visibility in low light. The display shows readings numerically and on a 33-segment bar graph. Insulations meters are commonly used for elect...
-
4.3 of 5.0 with 15 Reviews
SALE PRICE: $10.00 10% OFF
Manufacturer: Instek
Brand: GW Instek
Model: LCR RS232
Manufacturer: Instek
Brand: GW Instek
Model: LCR RS232
Instek LCR RS232 Option RS232 Factory Installed.
-
4.3 of 5.0 with 18 Reviews
SALE PRICE: $27.39 43% OFF
Manufacturer: SainSmart
Brand: RioRand
Model: LC100-A
Manufacturer: SainSmart
Brand: RioRand
Model: LC100-A
Note: The color of the item may vary slightly due to photography and your own computer Feature: Modle:LC100-A Effective display digits: 4 digits Interface: Mini USB interface and 5.5DC Socket Capacitance measuring range: 0.01 pF to 10uF The minimum resolution: 0.01 pF Inductance measuring range: 0.001 uH to 100mH Big inductance measuring range: 0.001 mH to 100H The minimum resolution: 0.001uH Measurement accuracy:1 percent LCD display mode: 1602 Test frequency range: L/C about 500KHZ Big inductance 500HZ Size:3.15x1.97x0.82 inch Pls reset to zero before testing Test frequency of this item is higher, it is not suitable for measuring the electrolytic capacitor Package include: 1x High precision L/C meter board 1x mini usb power cable Manual: https://s3-ap-northeast-1.amazonaws.com/sain-amzn/21/21-010-345/21-010-345-m.zip
-
4.3 of 5.0 with 14 Reviews
SALE PRICE: $34.99 1% OFF
Manufacturer: Duoyi
Brand: Yi Duo
Model: DY3166
Manufacturer: Duoyi
Brand: Yi Duo
Model: DY3166
Features:Measure insulation resistance to 2000M¦¸AC voltage measurement to 600VLow battery warningComplete with test leads, heavy duty carry casePackage includes:1 * DY3166 Analog Insulation Resistance Tester1 * Gift box
-
4.3 of 5.0 with 42 Reviews
SALE PRICE: $34.99 1% OFF
Manufacturer: GENERAL ELECTRIC
Brand: GE
Manufacturer: GENERAL ELECTRIC
Brand: GE
General Electric A0-91 Panel Meter (H6)
-
4.3 of 5.0 with 48 Reviews
SALE PRICE: $42.00 1% OFF
Manufacturer: GE
Brand: GE
Manufacturer: GE
Brand: GE
Ge Dc Amperes Meter 0-200 50-103121 (6326)
-
4.3 of 5.0 with 40 Reviews
SALE PRICE: $44.38 1% OFF
Manufacturer: JAIN SCIENTIFIC SUPPLIERS
Brand: JAINCO
Model: 1348
Manufacturer: JAIN SCIENTIFIC SUPPLIERS
Brand: JAINCO
Model: 1348
AC/DC actual working model fitted on sunmica base with LED indicator and reversing switch packed in card box. A premium product by JAINCOLAB, India.
-
4.3 of 5.0 with 26 Reviews
SALE PRICE: $48.79 66% OFF
Manufacturer: Duoyi
Brand: Yi Duo
Model: DY30-2
Manufacturer: Duoyi
Brand: Yi Duo
Model: DY30-2
Features:
Three test voltages, measure insulation resistance to 20G¦¸
AC voltage measurement to 600V
Low resistance buzzer
Data hold, auto range
Low battery warning
Complete with test leads, heavy duty carry case
Package includes:
1 * DY30-2 Insulation Resistance Tester
1 * Accessory kit (Insulation Test Leads and Leather Case)
1 * Gift Box
|
|