Capacitance & Resistance Meters - Page 26

Manufacturer: Asahi Keiki Brand: Asahi Keiki

Asahi Keiki Panel Meter Amh-752-12-12-1 (9042)

Manufacturer: Megger Brand: Megger Model: 249001

The Megger 249000 series calibration shunt calibrates a Megger 247000 series or DLRO10 series digital low resistance microhmmeter (sold separately). The shunt verifies the accuracy of the microhmmeter because the resistance of the shunt at a given current is known. The 249000 series is used to conduct more accurate resistance tests with a DLRO10 series microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: COLE-PARMER Brand: AEMC

Choose from our comprehensive line of AEMC Micro-Ohmmeter and other Resistance Testers products.

Manufacturer: VETUS INSTRUMENTS Brand: SMART SENSOR Color: Black

Feature: Insulation resistance tester, usually called megohmmeters or high resistance meter, widely used for measuring the generator, motor, power transformer, wiring, electrical appliances and other electrical equipment (such as cable control, signal, communication and power supply) insulation resistance. They are often used in routine maintenance procedures to indicate changes in insulation resistance for a few months or years. A large change in the insulation resistance may indicate a potential fault. As a result, regular calibration is necessary to ensure that the meter itself does not change over time Specification: Rated Voltage 500V/1000V/2500V/5000V Testing Range 500V:0.0~999MΩ 1000V:0.0~1.99GΩ 2500V:0.0~99.9GΩ 5000V:0.0~1000GΩ Accuracy ±2%rdg±3dgt DC/AC Voltage Test 30~600V Resolution 1.0V Overload Protect AC 1200V/10sec Withstand Voltage AC 8320V/5 sec Insulated Impedance 1000MΩ Max. Short Circuit Current 1.4mA Polarization Index √ External DC Adapter DAR √ PACKING INFORMATION: Power C*8 battery  Product Net Weight 1027g  Product Size 153*213*95mm  Packing knapsack Standard Quantity Per Carton 3PCS  Standard Carton Size 44.5*33*28.5cm  Standard Carton Gross Weight 6KG 

Manufacturer: UNI-T Brand: UNI-T Model: ut513a

Insulation Resistance(Ω): Test Voltages: 500V/1000V/2500V/5000V 0%~20% ; 500V: 0.0MΩ~20GΩ ±(3%+5); 1000V: 0.0MΩ~40GΩ ±(3%+5); 2500V:Insulation Resistance(Ω): Test Voltages: 500V/1000V/2500V/5000V 0%~20% ; 500V: 0.0MΩ~20GΩ ±(3%+5); 1000V: 0.0MΩ~40GΩ ±(3%+5); 2500V: 0MΩ~100GΩ ±(3%+5); 5000V: 0MΩ~1000GΩ ±(3%+5) Short Circuit Current: >3.0mA DC Voltage (V): 600V ±(2%+3) AC Voltage (V): 600V ±(2%+3) General Characteristic: Power: 8 * 1.5V Alkaline Batteries(LR14) (not included) Product Net Weight: 1.8Kg Product Size: 202mm * 155mm * 94mm LCD Size: 123mm * 58mm Product Color: Red & Grey Package Size: 32.5 * 31 * 12cm / 12.7 * 12.2 * 4.7in Package Weight: 4031g / 8.9lb

Manufacturer: Megger Brand: Megger Model: 6111-022

The Megger 6111 series duplex test lead with helical spring-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, and BT51 digital microhmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The helical spring-point hand spikes compress and rotate to make contact with a conductor. There is 0.4" (10 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for St...

Manufacturer: Megger Brand: Megger Model: 6111-022

The Megger 6111 series duplex test lead with helical spring-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, and BT51 digital microhmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The helical spring-point hand spikes compress and rotate to make contact with a conductor. There is 0.4" (10 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for St...

Manufacturer: CEM Brand: CEM

This is a brand new CEM DT-6605 from Ruby Electronics. This digital insulation tester is CE certified. This top-of-the-line device provides 500V, 1000V, 2500V and 5000V voltage during the test cycle. It sources up to 1.2mA current during the test to offset the capacitance load. With the auto range function, it can measure up to 60 Giga Ohm with the resolution of 10 mega ohm. The back light LCD screen allows you read easily in the dark. It also comes with a heavy duty carrying case to protect your device when working in the field.

Manufacturer: XZB Brand: XZB

Specifications: Parameters: L-Q, C-D, R-Q, Z-Q Accuracy: 0.01% Frequency: 50Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz (10 points) Display Range: L: 0.0001μH-99999H C: 0.0001pF - 99999μF R,Z: 0.0001Ω - 99.999MΩ Q: 0.00001 - 999999 Δ%: -999999% - 999999% D: 0.00001~9.99999 Source Resistance: 30Ω, 50Ω, 100Ω Range: Automatic And Manual with 9 ranges Display Max: principle parameter: 99999; sub parameter: 99999 Signal Level: 0.01Vrms, 0.3Vrms, 1Vrms Speed:3 times/second, 8 times/second, 20 times/second Comparator: 1 groups files record,15 bin sorting Adjustment: Open & Short sweep frequency and point frequency Interface: No Others: VFD Display, keypad lock and data hold function Voltage: 198V AC - 250V AC Frequency: 50Hz Power: Max 20VA (If you need 120V, Please contact us first, sometimes has not stocks ) Dimension: 264mm(Width)x107mm(Height)x350mm (Depth); Weight: 4kg ORDERING INFORMATION Accessories: ATL501: Test cable ATL601: Test fixture ATL600: Short-circuit device

Manufacturer: RioRand Brand: RioRand Model: RR-HA-FT-YI

RioRand® RR572 Smart Ground Resistance Tester | Youlide Intelligent Ground Resistance Tester