Indicators - Page 123

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-527E Color: Yellow

The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicato...

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: TMPLTAS

Defelsko PosiTector drilling template for 50mm dollies. Includes (10) drill bits 5/32" (4mm). Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1921TB-10

Mitutoyo 1921TB-10 Dial Indicator .001 In, .1 In/(.04 In per rev), 0-20-0, Flat Back, Series 0, 3/8 In stem diameter.

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

Extra long M5 stylus, 0.5 mm carbide ball, 11.0 mm diameter by 50.0 mm long stainless steel base. Overall stylus length is 60.0 mm. Stylus weight is 11.11 grams.

Manufacturer: Fowler Brand: Fowler

Economy Dial Gage Stand with microfine adjustment knob for zero setting. Features Accepts all dial indicators with 3 8" stems. Column 5 8" from back edge of working surface. Column diameter: 1" Fine adjustment: 3 8". Positive lock screw Capacity of 6-1 2" from working surface Bracket with 1 4" bolt for dial indicator is 2-1 4" from center of column Microfine adjustment knob for zero setting Microscrew fingertip control Ground steel post mounted at right angles to the base Ground working surface 5-1 2" x 4-1 4"

Manufacturer: Central Tools Brand: Central Tools

CE4346 Features: -Dial indicator. -Range: 0.2''. -Graduation: 0.001''. -Reading 0-100. Product Type: -Testers. Quanitity: -Single. Generic Dimensions: -Back plunger, 0.25'' diameter shank. -Width: 1.5''. Dimensions: Overall Product Weight: -0.26 Pounds.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Advanced Systems & Designs Brand: Advanced Systems & Designs

Using a high quality 6-pin connector, this Advanced Systems & Designs gage cable connects the Mahr Federal Maxum III or Maxum Plus digital indicator to a Digimatic 10-pin output. This gage cable is designed to work with the Advanced Systems & Designs GageMux® or other similar Digimatic input devices. The cable is directly connected to the GageMux® or other devices that recognize the Mitutoyo Digimatic signal and does not obtain any power from the gage. The data transfer can be triggered using any of the following methods: • Using the data send button on the gage, if it has one • Using the Footswitch on the GageMux® (or equivalent triggering method on similar devices • Sending a gage read command from the computer to the GageMux®. A detailed operation manual is included with this gage cable including instructions on how to properly configure your Maxum III gage for the proper output format. Can ship only within the United States.

Manufacturer: iGaging Brand: iGaging Model: 35-700-25

Igaging absolute technology indicator the imaging digital electronic indicator with absolute encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Indicator face can be rotated up to 330°. features: SPC/USB data port indicator face can be rotated up to 330° absolute encoder technology IP54 protection read and convert inch/mm display change measuring direction - positive up or positive down origin set preset value tolerance function zero/ABS - switch between incremental and absolute measuring Super large LCD display shank diameter: 3/8" Carbide tip 4-48 threaded tip 2 years warranty specifications: range: 1"/25mm resolution: 0.00005"/0.001mm accuracy: 0.00020" repeatability: 0.00005"/0.001mm battery: 1x CR2032 (2 included).

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-514E Color: Yellow

The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicato...