Indicators - Page 127

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-471B

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Motionics Brand: Motionics Model: W0

WiMER Uno is a data collector and wireless transmitter for Mitutoyo digital instruments that don't usually require continuous data streaming, for example calipers, micrometers and so on. One one side, Uno has a 10-Pin digimatic connector, making it possible to connect to almost all Mitutoyo SPC cables. This will also allow users to reuse data cables if they already have Mitutoyo data communication systems. Please refer to the list below for compatible Mitutoyo instruments. On the other side, Uno has a 2.5mm audio port for a foot switch or a hand trigger switch to trigger data collection. Uno normally stays in Standby mode. Data reading is not triggered until the trigger button is pressed.Once Uno reads a value from the connected gage, it will wirelessly send this reading to iOS/Android/Windows devices via Bluetooth Low Energy. This item is built and shipped from TX, USA

Manufacturer: CAS Corporation Brand: CAS Model: CI-200S

The CI-200 Series, a family of digital indicators providing full featured versatility and dependability at an economical price. A wide array of standard features include either 304 stainless steel IP67 rated or hardened plastic NEMA 12 enclosures, AC or DC operation, choice of dry cell or rechargeable battery, full function numeric keypad, ID capabilities, and much more.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The set includes one each regular dial test indicator (0.060" measuring range, 0.0005" resolution, 1.5" dial diameter, 0-15-0 dial reading), rectangular attachment, reducing sleeve (inch), swivel holder (inch), storage case for measuring inserts, wrench for measuring inserts.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-564A

Mitutoyo 543-564A LCD Absolute Digimatic ID-H560E Indicator has five user-selectable resolutions of 0.00002, 0.00005, or 0.0001”, and 0.0005 or 0.001 mm, an accuracy of + or - 0.0001” (0.0025 mm), and a total measurement range of 0” - 2.4” (0 - 60.9 mm), and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The LCD display has a sealed housing that meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, an 8-mm diameter stem, a steel ball contact point, and a flat back. The indicator displays maximum and minimum read hold, changes color from green to red when user-defined tolerances are exceeded, and has total indicator reading (TIR) capability that displays the absolute difference between the highest and lowest readings. A backup memory function retains user-defined setup conditions when power is interrupted, and an alarm low voltage and overflow, tolerance limit setting, and counting value composition errors. The indicator has remote control functionality, RS-232C data input and output, and SPC data output features that allow for data analysis, and a choice of two power sources (AC or 9V battery). Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-581

The Mitutoyo 543-581 Absolute Digimatic electronic indicator gauge, ID-B body, is for measuring short, linear distances in harsh workshop conditions. It has a measurement range of 0 to 0.2" (0 to 5mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.0008". The LCD displays in both inches and metric units, and can be rotated 180 degrees for taking measurements from different directions. The body is a back-plunger style with a 5mm-stroke plunger, for mounting onto leveling machine tool tables or inspection jigs, and for use in restricted spaces where the graduations of standard dial gauges are difficult to read. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP66 for protection against dust and water jets.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions include zero set, preset, direction switching, tolerance judgment, hold, and alerts for low voltage, counting value composition error, overflow error, and tolerance limit setting error. This indicator gauge has a measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.2" (0 to 5mm)Resolution0.0005" (0.01mm)Accuracy+ or - 0.0008"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, face can be rotated 180 degrees, back plunger configurationData outputYesDimensions110.9 x 35 x 44.3mm (H x W x D)Shipping weight0.53lb.StandardsIP66Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back...

Manufacturer: Mahr-Federal Inc. Brand: Mahr Federal

Digital Indicator, Series Marcator 1080, Resolution 0.0001 In./0.005mm, Accuracy 0.0006 In./0.015mm, Range 0.500 In./12.5mm, Bezel 2.28 In., Features On/Off, Reversal of Counting Direction, Inch/Metric, Preset, Data Output, Capacitive Measuring System, Lock Out Function, LCD, Includes 8mm Stem, Storage Case, Battery Electronic IndicatorsLCD In/mm conversion 3/8" stems Hold function Zero set Power On/Off Include batteryMahr-FederalData output on all units. 5RHH5, 5RHH6, 5RHH7, 5RHH8, 5RHH9, 5RHI0, 5RHI1, 5RHI2, 5RHI3, 5RHI4, 5RHI5, 5RHI6, 5RHI7, 5RHI8, 5RHI9 have rotating bezel. 5RHJ1, 5RHJ2, 5RHJ3, 5RHJ4, 5RHJ5 have digital and analog display.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-495B

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-475B

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-491B

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.