Capacitance & Resistance Meters - Page 15

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3021

The Kyoritsu digital megohmmeter is an auto-ranging insulation tester with four test voltages for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400Ω and AC and DC voltage to 600V, lighting a warning indicator and sounding a buzzer when a live circuit is detected. The comparator function allows a reference resistance value to be set, lights a "pass" or "fail" indicator for subsequent readings, and triggers a buzzer when a reading exceeds the reference value. Up to 99 insulation resistance readings can be stored in the unit's internal memory. When measurement is complete and the range selector is switched off, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter has an LCD with a backlight for visibility in low light that automatically turns off after 60 seconds. The display shows readings numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.This auto-ranging meter automatically selects the appropriate operating range for measurements. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It automatically turns off after 15 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. It comes with a set of test leads with a remote control switch for initiating a test, a test bar, a safety alligator clip, an extension prod, a test lead storage pouch, six AA batteries, and instructions. SpecificationsMaximum insulation resistance measured2,000MΩTest voltagesB009TAL7K...

Manufacturer: KEYSIGHT TECHNOLOGIES Model: U1733C

With the U1733C you can perform quick, basic LCR measurements at your convenience. Now you can measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. With the auto identification, Ai which conveniently displays component type and detailed component analysis such as Z, ESR, DCR, you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. 20,000 counts resolution 0.2% accuracy Wide LCR ranges with 5 selectable test frequencies (100Hz, 120Hz and 1kHz, 10kHz and 100kHz) Detailed component analysis with DCR, ESR, Z, D and Q functions IR-to-USB connectivity for data logging to PC

Manufacturer: NF Corporation Brand: NF

Measurement frequency : ≤ 100 kHz

Manufacturer: HIOKI Brand: Hioki

HIOKI HIOKI IR4056-20 INSULATION TESTER, 50/125/250/500/1000V

Manufacturer: The Crosby Group Brand: MCKISSICK

CROSBY 40410"BB TLBRD BK 5/8- (102230)

Manufacturer: Malxs Brand: Malxs

Product Description： Display：3 3/4 9999 counts Jaw：Φ37mm 45 * 32mm Double insulation, strengthen the interference resistance Untouched measurement, ensure the safety 0.01Ω high accuracy for low resistance measurement 0.001Ω high resolution Set alarm threshold in 1Ω to 100Ω Test voltage：3700V Limiting overload：20A RMS current Average consumption：approx. 50mA Data logging And recall：99 groups Alarm Limit Setting：Set alarm threshold in 1Ω to 100Ω Current measurement：Measure leakage current and neutral current Time per measurement：1 second Safety Rating ：EN61010-1, EN61557-3, EN61326-1 CAT.II 600V Specifications： Resistance： Range Accuracy Resolution 0.01Ω to 0.999Ω ±(1.5% + 0.01Ω) 0.001Ω 1Ω ~ 9.99Ω ±(1.5% + 0.1Ω) 0.01Ω 10Ω ~ 99.9Ω ±(2.0% + 0.3Ω) 0.1Ω 100Ω ~ 199.9Ω ±(3.0% + 1Ω) 1Ω 200Ω ~ 400Ω ±(6.0% + 5Ω) 1Ω 400Ω ~ 600Ω ±(10% + 10Ω) 5Ω 600Ω ~ 1200Ω approx. 20% 10Ω Current： Range Accuracy Resolution 100mA ±(2.5% + 1mA) 0.1mA 300mA ±(2.5% + 2mA) 0.3mA 1A ±(2.5% + 0.003A) 0.001mA 3A ±(2.5% + 0.01A) 0.003mA 10A ±(2.5% + 0.03A) 0.01mA 40A ±(2.5% + 0.05A) 0.03m Accessories: Earth Ground Resistance Clamp Tester*1 Resistance detector ring (1Ω)*1 Resistance detector ring (5Ω)*1 Resistance detector ring (10Ω)*1 Metal carry case*1 Gift box*1

Manufacturer: COLE-PARMER Brand: AEMC

FEATURES Measures soil resistivity (4-point) (Model AE211494) Measures ground resistance (2 and 3 point) fall of potential method Large analog display (Model AE211490) Large LCD digital display (Models AE211492 and AE211494) Designed to reject high levels of noise and interference Auto-ranging: automatically selects the optimum range (Models AE211492 and AE211494)) Battery powered Extremely simple to operate: connect - press - read Indicator error lights Rugged dustproof and rainproof case Color-coded terminals and lead identification Model AE211495 Kit includes: meter, one 16 ft color-coded lead, two 100 ft color-coded leads, two 300 ft leads on reels, four 16" auxiliary ground electrodes, soft carrying case, batteries and user manual. Model AE211493 Kit includes meter, one 16 ft lead, two 150 ft leads on reels with wind-up handles, two 16" auxiliary ground electrods, soft carrying case, batteries and user manual. Model AE211494Kit includes meter, one 16 ft lead, two 150 ft leads on reels with wind-up handles, two 16" auxiliary ground electrods, soft carrying case, batteries and user manual.

Manufacturer: AEMC Brand: AEMC Model: 6470-B

The AEMC 6470-B multi-function digital ground resistance tester performs 3-point ground resistance, 4-point soil resistivity, and 2- and 4-wire bonding resistance testing in rugged conditions, such as field maintenance with numerous tests. The tester is designed for ease of use with “connect–press–read” operation, a large easy-to-read LCD screen, and user alerts. For higher accuracy in electrically noisy environments, the tester can be operated in manual or automatic frequency scan mode from 40 to 513Hz. Test voltage of 16V or 32V can be selected up to 250 milliAmp (mA) test current. The tester automatically recognizes all electrode connections and their resistance value. The auto power-off feature turns off the tester after a set period for power management. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.The tester’s software (included) is compatible with Microsoft Windows XP, Windows Vista, Windows 7, and Windows 8. It enables remote set-up and operation of all measurements, and provides data storage, real-time display, analysis, report generation, and system configuration. Up to 512 complete test results can be stored in memory for recording data in the field and then analyzing readings when convenient. After taking measurements, reports are automatically generated. The AEMC 6470-B exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. The double-insulated tester is compliant with grounding standards IEC 61557 parts 4 and 5. Safety ratings include EN 61010-1, CAT IV 50V, and pollution degree 2. The tester comes with rechargeable NiMH batteries, optical USB cable, 110/240V power adapter with 115V U.S. power cord, DataView software, ground testing workbook and DVD, carrying bag, and user manual. When closed, the carrying case has an IP 54 rating that protects the instrument from dust and water. Specifications 3-point electrical measurement range Autoranging 0.01 to 99.9kΩ...

Manufacturer: Megger Brand: Megger Model: 242104-2-26

The Megger 242104-2 series duplex test lead with C-clamp is for use with Megger 247100, 247101, DLRO200, and DLRO600 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements. The lead has a maximum test current input of 100 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 4" (10 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardiza...

Manufacturer: GROUP MAX LIMITED Brand: Reed Instruments Model: MS2301-NIST

The REED Earth Resistance Meter has a resolution of 0.001Ω for low resistance measurements and an accuracy of ± 0.01Ω. The meter stores up to 99 resistance measurements and has a limit alarm. There is a user selectable alarm threshold from 1 to 100Ω and 1 second sampling time. This earth resistance tester measures leakage current to 1mA and neutral current to 20A and has a 4-digit 9999-count LCD.