Capacitance & Resistance Meters - Page 18

Manufacturer: Duoyi Brand: Yi Duo Model: DY4200

Features:Ground resistance measurements from 0.01¦¸ to 2000¦¸ with 0.01ohm resolutionLCD backlightData hold, auto power off, low battery warningComplete with test leads, auxiliary earth bars, heavy duty casePackage includes:1 * DY4200 Ground Resistance Tester1 * Accessory Kit (including Earth Bars and Wires, Test Wire for Earth Resistance)1 * Carry Case

Manufacturer: Cooler Master Brand: Cooler Master Model: CL-001-KKN1-GP

Cooler Master Test Bench V10 ATX MATX Mini ITX PicoITX Nano ITX CL001KKN1GP Components Computer Cases

Manufacturer: NF Corporation Brand: NF

Manufacturer: B&K PRECISION Brand: Materro(tm)

Manufacturer: Extech Brand: Extech Model: 382252

Earth Ground Resistance Tester Kit - 382252 Includes all hardware necessary to measure earth ground in 3 ranges from 20 to 2000Ohm

Manufacturer: B&K Precision Brand: B&K Precision Model: 600B Color: Blue/White

The 600B Battery Capacity Analyzer addresses the need to test and maintain sealed lead acid (SLA) batteries used in backup power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems. By quickly characterizing a battery's response to a load resistance, the meter displays the remaining battery capacity as an indicator of the battery's health.

Manufacturer: Promax Brand: Promax Model: MZ-505C

The L/C/R MZ-505C handheld meter displays values up to 19,999 counts using 41/2 digits and it is controlled by a special microprocessor, which measures inductance, capacitance and esistance. It is easy to use and it allows measuring in parallel and serial mode. It takes direct and accurate measures of coils, capacitors and resistors at different frequencies. It allows selecting measure ranges in manual or automatic way. The front panel keys provide maximum comfort when selecting functions and features like read-memory; maximum value log, minimum and average; relative measures; tolerance for components classification; frequency and L/C/R selection. Results of measures are displayed in a (dual) backlit screen and they can be transferred to a PC by means of an opto-coupled standard RS-232 interface. A tilted support makes easy to view and work with it. A rubber holster, made to protect the instrument from unexpected shocks, covers the MZ-505C giving it mechanical protection. To operate its required a 9 V battery and also it can work with a 12 V power adaptor.

Manufacturer: Megger Brand: Megger Model: 6111-284

The Megger DCM300E digital ground leakage clamp meter is an average-sensing meter for measuring alternating current (AC) and for locating ground faults in electrical testing applications. It has a clamp with two jaws that can close around an electrical conductor up to 1.57" (40 mm) in diameter to measure current without touching or interrupting the circuit. The meter's 10-microamp minimum resolution detects small amounts of leaking current in ground faults. The hold function keeps a reading on the display, even after the meter is disconnected. The meter's liquid crystal display (LCD) shows readings in digits and on a bar graph and is backlit to provide readability in low light. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock, and insulation around the jaw helps reduce the risk of short circuiting live conductors. The meter can survive falls of up to 1.2 meters to a hardwood or concrete floor.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It has a 3,200-count resolution, meaning that it can display up to 3,199 units (3-3-1/2 digits) before the operating range needs to be changed. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), and category III installations up to 500V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The unit comes with a pouch for transporting and storing th...

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U1733C

Now you can measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. With the auto identification, Ai which conveniently displays component type and detailed component analysis such as Z, ESR, DCR, you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. With the U1730 Series, you can perform quick, basic LCR measurements at your convenience, without burning a hole in your pocket.

Manufacturer: Megger Brand: Megger Model: 242006-18

The Megger 242006 series duplex test lead with Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The Kelvin clip directs current through one jaw and potential through other jaw when taking resistance measurements on cables and small wires. It has a 1.5" (4 cm) jaw opening.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headqua...