Capacitance & Resistance Meters - Page 16

Manufacturer: Megger Brand: Megger Model: 6410-957

The Megger 212000 series insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and electrical testing. The average-sensing meter help provide accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. This analog meter has manual range selection for flexibility of use and a guard terminal to eliminate surface current leakage. Selectable test currents allow use in a variety of applications. The tester is safety rated to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger 212000 series is commonly used by electricians and electrical contractors.Specifications Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Weight 1kg / 2.3 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat II 300V, Cat I 600V Dimensions 130 x 125 x 180mm / 5.1 x 4.9 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has...

Manufacturer: Amprobe Brand: Amprobe Model: AMB-55

The Amprobe AMB-55 industrial high-voltage insulation resistance tester is a digital meter that measures insulation resistance, current, capacitance, and voltage to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, surge arresters, generators, and electrical motors. The tester has automatic range selection for increased safety. The unit measures 0 to 600V alternating current (AC) or direct current (DC), current from 0 to 5.5mA, capacitance from 0 to 50 microfarads, and insulation resistance from 0 to 10 teraohms using DC test voltages from 250 to 5,000V in 25V increments. The internal memory holds up to 1,000 test results for later download to a PC using USB or RS232 data interfaces. The tester is safety rated to European Standard (EN) 61010-1, Category IV, 600V. The unit has a programmable timer to perform Dielectric Absorption Ratio (DAR), Polarization Index (PI), dielectric discharge (DD), and step voltage tests. The tester is powered by six C batteries (included). The AMB-55 is designed for use by electricians and electrical contractors. Specifications Power supply (6) C batteries (included) Insulation resistance range 0 to 10 teraohms Test voltages 250 to 5,000V DC in 25V increments AC and DC voltage range 0 to 600V Current range 0 to 5.5mA Capacitance range 0 to 50 microfarads Weight (including batteries) 6.6 lbs./3kg Dimensions 12 x 5 x 10 inches/31 x 13 x 25cm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers,...

Manufacturer: Weschler Brand: Weschler

B Weschler Panelmount Amp Meter 0-50 Ac Ga332Aca (4840)

Manufacturer: Krebs Brand: Krebs Model: 12-508-201

Insulation sleeve for container of Krebs LM3 hotCHOC sprayer. The sleeve keeps chocolate in the spare container warm and fluid.

Manufacturer: SODIAL(R) Brand: SODIAL(R) Color: Black

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration. SODIAL(R)Multifunction LCD backlight transistor tester diode thyristor Capacitive ESR LCR meter with black plastic housingCharacteristics:Powered by 9V battery. NPN and PNP transistors, N-channel and P-channel MOSFETs, diodes, thyristors, Resistors, capacitors or other devices to automatically detect. The pins of a component to test and display on the screen automatically Two-button operation, automatic shut-off to prevent unnecessary waste Short detection time: only 2 seconds. It's normal cost 1 minute charging capacitor detection Note:Please make sure capacitors are discharged before Testing Specifications:. Material: PCB + Plastic Display: 128 x 64 LCD shutdown current: 20 nA resistance test Range: 0.5¦¸-50M¦¸ inductance test Range: 0.01mH-20H capacitor test Range: 25 pF 100000uF item size: 13 x 6.5 x 2cm / 5.1 x 2.6 x 0.8in item weight: 103g / 3.7 oz package list: 1 x transistor testerNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.

Manufacturer: TOOGOO(R) Brand: TOOGOO(R) Color: Red + Black

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. Our products will enhance your experience to unparalleled inspiration. TOOGOO(R)Cable Tester Cable Detectors Cable Tracker Network Tester Pipe Locator RJ45 Red+Black Color: Red + Black Packing dimension: approx. 23.5 x 23.5 x 8.5 cm Audio Test and Cable Test: open, short, connector, reverse wiring, cross wiring; Positioning incorrect wiring; Cable length measurement; The measure distance of open circuit and short-circuit. delivery: 1 x main tester 1 x receiver 1 x remote detection device 1 x RJ45 network cable 1 x alligator clips cable 1 x instruction manual 1 x headphones 1 x battery 1 x tool bag Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.

Manufacturer: Jones Stephens Brand: Jones Stephens

JS 3-5/8" ID Self-Sealing Pipe Insulation, 3/8" Wall Thickness - I52358Features: 100% closed cell polyethylene UPS shippable cartons - CARTON QUANTITIES ONLY Complete seal on hot or cold pipe Two strips of self-adhesive mylar seal easily at any length 42 FT/BOX

Manufacturer: Jones Stephens Brand: Jones Stephens

JS 3-5/8" ID Self-Sealing Pipe Insulation, 3/8" Wall Thickness - I52358Features: 100% closed cell polyethylene UPS shippable cartons - CARTON QUANTITIES ONLY Complete seal on hot or cold pipe Two strips of self-adhesive mylar seal easily at any length 42 FT/BOX

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 810C

The Model 810C Capacitance Meter is a compact capacitance meter, designed for accurate measurement of capacitive components. It features direct plug in test sockets and test lead jacks. A zero adjustment knob is also provided to "zero" test lead capacitance. Zero adjustment knob. Capacitor test sockets. Fuse protected. Range (best resolution): 200pF (0.1pF), 2nF (1pF), 20nf (10pF), 200nF (100pF), 2 microfarad (1nf), 20 microfarad (10nf), 200 microfarad (100nf), 2000 microfarad (1 microfarad), 20mF (10 microfarad). Accuracy: +/-(0.5 percent reading + 1 digit + 0.5pF), +/-(0.5 percent reading + 1 digit), +/-(0.5 percent reading + 1 digit), +/-(0.5 percent reading + 1 digit), +/-(0.5 percent reading + 1 digit), +/-(0.5 percent reading + 1 digit), +/-(0.5 percent reading + 1 digit), +/-(2 percent reading + 1 digit), +/-(4 percent reading + 1 digit). Power Source, 100 MHz Bandwidth: 9V battery life: 200 hours type (alkaline) Display: 3-1/2 digit LCD Digit height: 0.56 inches Operating temperature: 32 to 104 degree F (0 to 40 degree C) Storage temperature: 14 to 140 degree F, greater than 70 percent RH (-10 to 60 degree C) Measures 6-3/4" length by 3" width by 2-1/4" depth. 1 year warranty.

Manufacturer: PROFICIENT Brand: Proficient Model: F400 Slvr

PROFICIENT LCR TYPE ON WALL SPEAKER. MAY BE PLACED HORIZONTALLY OR VERTICALLY. HAS PIVOTING TWEETER AND BASS & TREBLE ADJUSTMENTS ! TO MATCH YOUR LISTENNING ENVIRONMENT AND PERFORM AT ITS BEST !