Capacitance & Resistance Meters - Page 20

Manufacturer: MEGGER Brand: Megger Model: MIT410-EN

MEGGER - MIT410-EN - INSULATION TESTER; 1000V; 100GOHM

Manufacturer: Megger Brand: Megger Model: 6111-429

The Megger DLRO10 series digital microhmmeter measures resistance in switch and contact breakers, bus-bar and cable joints, battery systems, resistive components, and other electrical component links. The meter is autoranging and digital for safety and ease of use. The auto current reversal function cancels out thermal electromagnetic fields (EMFs) for more accurate test results. The unit has a noise limit set at 100mV. An indicator light illuminates when the noise limit has been exceeded. The unit automatically measures continuity when it is connected to a circuit. The DLRO10 series is used by electricians and electrical contractors.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. Meters measure electrical properties and are safety rated to measure a specific range of results. The range on the meter should be higher than the maximum anticipated value to be measured. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range. Megger manufactures equipment for cable fault locating, prot...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1550C

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: uxcell Brand: uxcell

Features:100% brand new and high qualityMeter clip probe for SMD components measurementEasy to useUniversal Fit Multimeter PlugsSuitable for resistor, capacitors and other SMD componentsMade From Shielded Coax CablesComfortable Non- Slip GripEasy To Read + and - Signs Near ProbesClips Open Distance: 10mmVoltage: Maximum 250VClip length: about 15cmCable length: about 60cm

Manufacturer: QENDDC ANG Brand: QENDDC ANG

Specifications 1) the working voltage: 6.5 ~ 100VDC 2) max power: 20A/2000W 3) measurement precision: class 1 About function 1) measure and monitor the electrical parameters (voltage, current, kWh, watt). 2) Overload alarm function (more than watt alarm threshold , backlight flashing). 3) power alarm threshold preset function (can set up their own power alarm threshold). 4) power(kWh) button reset function. 5) When power off, store the data, when on, continue the date. 6) large screen LCD liquid crystal screen full display function (voltage, current, kWh, watt). 7) backlight function. About Display display interface. By the large screen LCD display LCD monitor voltage and current, kWh, watt, electric parameters. 1) watt: the measurement range of 0~2kW less than 1kW: 0.0~999.9W less than 10kW: 1000~2000W; 2) kWh: the measurement range of 0~9999kWh less than 10kWh: 0~9999Wh ; more than 10kWh:10~9999kWh; 3) the test voltage range of 6.5-100V DC Display format 6.50~99.99V 4) current test range: 0~20A Display format 0.00~20.00A. Package Include 1 x (4 in 1) DC 20A LCD Combo meter Voltage current KWh watt Car battery pannel power monitor

Manufacturer: Honeytek Brand: Honeytek Model: A6013L

Capacitance Range: 0.1pF +/-0.5%+5 820Hz 200pF 1pF +/-0.5%+5 820Hz 2000pF 10pF +/-0.5%+5 820Hz 20nF 100pF +/-0.5%+5 820Hz 200nF 1nF +/-0.5%+5 820Hz 2uF 10nF +/-0.5%+5 82Hz 20uF 100nF +/-0.5%+5 8.2Hz 200uF 1uF +/-2%+10 8.2Hz 2000uF 10uF +/-4%+10 8.2Hz 20mF 9 measuring ranges from 200pF to 20mF, LCD display with Black Light, Auto discharge for capacitors below 1000V, LSI-circuit provides high reliability and durability, ZERO adjustment for compensation of measuring, data-hold function, Over-range indication, Low battery indaction, Compact structure & pocket size, with protection holster. FEATURES : *1. 9 measuring ranges from 200pF to 20mF *2. LCD display with Back Light *3. LSI-sircuit provides high reliability and durability. *4. With input overload protection *5. ZERO adjustment for compensation of measuring leads *6. Data-hold function *7. Over-range indication *8. Low battery indication *9. Compact structure & pocket size Package Contents : *1 X 6013 capacitor meter *2X probes with Original Factory Protective Styrofoam Package

Manufacturer: CHINA Brand: Officeshop

Feature: A key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation. Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors , inductors. Automatic detection pin definitions. Measurement of the bipolar transistor current amplification factor (B) and conduction voltage emitter junction (Uf). Darlington transistor may be identified by the amplification factor of the high threshold voltage and high current. Can be detected inside the bipolar transistor and MOSFET protection diodes and displayed on the screen. The threshold voltage and the MOSFET gate capacitance measurement. Support two measuring resistors , the potential can also be measured . If the potentiometer is adjusted to its end , the tester can not distinguish the two ends of the pin and the middle. Resistance measurement resolution is 0.1Ohm , the highest measurement value of 50MOhm. Capacitance measurement range from 25pf to 100mF (100000UF). Resolution up to 1PF. Can detect more than 2UF capacitor equivalent series resistance (ESR), with a resolution of 0.01Ohm. This feature is very important for the detection capacitor performance. You can display symbols of the two diodes in the right direction , also shows the forward voltage drop. LED detection of diode forward voltage drop higher than normal . Dual LED detected as double diodes. Simultaneous detection of light-emitting diodes will flash. Each test time is about two seconds , only large capacitance and inductance measurements will take a long time.

Manufacturer: SainSmart Brand: SainSmart

Specifications: - Type: Assembled Tester / DIY Kit(Optional) - Display: 160*128 LCD - Power Supply: 1 * 9V Battery(not included); DC 6.8-12V - Current: Approx. 30mA - Power Supply: 1 * 9V Battery(NOT Included) - Resistance Measurement: Max. 50MΩ - Resistance Resolution: 0.01Ω - Capacitance Measurement: 25pF~100mF - Capacitance Resolution: 1pF - DC Voltage Measurement: Up to 50V - Screen Size: 3.7 * 3cm / 1.45 * 1.18in - PCB Size: 7.8 * 6.2cm / 3.1 * 2.44in - Product Weight: 66g / 2.3oz - Package Weight: 69-73g / 2.45-2.57oz Package List: 1 x Assemble Black Transistor Tester Notice: Before measuring capacitance, the capacitor must be discharged, otherwise very likely damage the meter.

Manufacturer: Wotefusi Brand: Wotefusi

Description: Conditon:Brand new Net weight:176g Modle:UA6243L Specification:143*74*35mm Resistance: 20 ¦¸-2000 M ¦¸ Capacitance: 2000-200 uF Inductance PF: 20 mH-20 H Show digits:1999 UA6243L is a stable performance, safety, reliability, high precision hand-held 3 1/2 a manual switching range digital instrument. Can be used for measuring resistance, capacitance, the transistor amplification beta. Package including: 1 X Capacitance Tester

Manufacturer: KEYSIGHT TECHNOLOGIES Brand: KEYSIGHT TECHNOLOGIES Model: U1782B

' Tweezer, For Use With U1700 Series Handheld Capacitor and Handheld LCR Meters, Manufacturers Warranty Length 3 Months '