Dimensional Measurement - Page 631

Manufacturer: Taylor Toolworks Brand: Taytools

20 inch 500 mm digital protractor with rule 2 in 1. This super handy and precise digital protractor is perfect for making ultra-precise angled measurements and project layouts. It has the following features: 1) 1.375 inch wide by 20 inch long stainless steel blades with photo etched graduations in mm and quick reading 32nds 2) Closed length 20.4 inches, full open length 39.3 inches 3) Zero function allow setting of zero at any angle point 4) Display reads continuously as arms are adjusted 5) Measures both inside and outside angle measurements 6) Large clear LCD display 7) Strong blade lock holds securely for transfer of measurements 8) Measuring range: 0-360 degrees 9) Powers off after 5 minutes of nonuse 10) Resolution: 0.1 degree 11) Accuracy: +/- 0.3 degree 12) Repeatability +/- 0/1 degree 13) Battery: 3V CR2032 with approximately 5000 hours of continuous use

Manufacturer: Taylor Toolworks Brand: Taytools

20 inch 500 mm digital protractor with rule 2 in 1. This super handy and precise digital protractor is perfect for making ultra-precise angled measurements and project layouts. It has the following features: 1) 1.375 inch wide by 20 inch long stainless steel blades with photo etched graduations in mm and quick reading 32nds 2) Closed length 20.4 inches, full open length 39.3 inches 3) Zero function allow setting of zero at any angle point 4) Display reads continuously as arms are adjusted 5) Measures both inside and outside angle measurements 6) Large clear LCD display 7) Strong blade lock holds securely for transfer of measurements 8) Measuring range: 0-360 degrees 9) Powers off after 5 minutes of nonuse 10) Resolution: 0.1 degree 11) Accuracy: +/- 0.3 degree 12) Repeatability +/- 0/1 degree 13) Battery: 3V CR2032 with approximately 5000 hours of continuous use

Manufacturer: INSIZE Brand: INSIZE Model: 4799-180

Protractor, 3.1x4.7", 0-180°.

Manufacturer: Baseline Brand: Baseline

A goniometer measures range-of-motion (ROM) of various joints. The 180° head is marked in 1° increments. Tension between the arms is controlled by the thumb knob. 180 Degree Range - 8 inch Legs

Manufacturer: Generic Brand: Generic

One tool does the layout and measuring work of several others. Multi-Function Height/Depth Gauge is primarily used to set table saw blade height from tabletop, fence-to-sawblade distance and miter-slot-to-blade alignment as well as establish router bit and drill press depths and drill bit stop locations, set radial arm saw dado depth and blade height from tabletop, but it also performs a number of other important jobs: Use gauge to mark or scribe a line - mark straight lines up to 5" from board edges and set up your band saw and shaper table, too. Depth rod measures up to 5" for dadoes, slots, dowel and screw holes and in tight spots. 6-1/8"H x 1-1/2"TH x 4-3/8"W - engineered reinforced polymer and steel/brass construction. Photo engraved, tempered stainless steel 5" scale is marked in precise 1/32" increments. All measurements are read on just one scale - reverse scale for millimeters up to 12.5cm. Magnetic base ensures secure grip on ferrous metal surfaces. Includes hex wrench and complete calibration and use instructions. Imported. U.S. Patent No. UM-77013 and 5,491,907.

Manufacturer: Footprint Tools Brand: Footprint Tools Model: 40038

Item number 29695-45, Grading is cover/record: VG+/EX using Goldmine standards. 1969,pic sleeve & 45 Please see seller profile for abbreviation descriptions.

Manufacturer: Amico Brand: Amico Model: a12052400ux0024

Retractable centimeter tape measure.Plastic case, white steel tape, buit-in hand strap.Simply pulling the measuring tape, and is easy to retract it by using the short handle at the center.Designed with the hand strap, can hang on the wrist.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-1108

HHIP go-no-go thread plug gage with handle, Class 6H for mm most commonly used for general applications including bolts, nuts, screws and similar fasteners. Size: M8 x 1.25.

Manufacturer: SciMam Commercial and Trading Co.,Ltd. Brand: SciMam Color: Silver

SciMam 6 inch / 150mm Stainless Steel Electronic LCD Digital Vernier Caliper with Carrying Case Product Description Measurement Range: 0 - 6" and 0 - 150mm; Resolution: 0.0005" / 0.01mm; Accuracy: ±0.001" / ±0.02mm Power: 2 x 1.55V (button cell) battery (included) Internal, external and height dimensions can be easily and accurately measured. With data holding, fast display, fast tracing maximum and minimum value during measurements. Calibrates to zero, and can change from mm to inches with the touch of a button.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-1108

HHIP go-no-go thread plug gage with handle, Class 6H for mm most commonly used for general applications including bolts, nuts, screws and similar fasteners. Size: M8 x 1.25.