Dimensional Measurement - Page 1141

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-004

The Mitutoyo 368 series Holtest vernier inside micrometer has two-point contacts for measurement of the inside dimension (ID) of small bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm. The measuring faces are made of hardened steel and the micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo

Manufacturer: Starrett Brand: Starrett

Insulated rods marked with length Adjustable for length Measuring rods are solid Hardened and ground anvils Quick-reading figures 6-1/2" (165mm) long handle is available (124H)

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-875

The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0002”. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 1017-4 Color: White

The Starrett outside dial caliper gauge opens to 2" with 0.001" dial graduations, one full rotation equaling 0.1". The gauge has carbide ball contacts for longer life and wear resistance. The deep opening reaches over the workpiece, such as in castings and sheet metal, to measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand for accuracy. Dial indicators, also called dial gauges or probe indicators, are precision measuring tools used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA Extension for Intrimik micrometers is an accessory to Intermik Micromaster and Style A inch micrometers for extending its reach for measurement of a deep hole. It has a set of retractable, spring-loaded arms for self-centering. The accessory is made of high-grade tool steel for durability and has a satin-chrome rust- and glare-resistant finish .Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-268

The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA Etalon Intalometer 531 vernier inside micrometer has three-point contacts for measurement of the inside dimension (ID) of through holes, blind bores, or short centering shoulders, and a vernier scale in metric units for taking precise ID measurements. It also has a knurled friction thimble helps provide quick adjustment capability.The micrometer is made of high-grade tool steel and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.002mm. The measuring contacts are made of hardened steel for durability and separated by 120 degrees. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: DeFelsko Brand: DeFelsko

The PosiTector 6000 FHXS1 Xtreme Coating Thickness Gauge Standard Model with Separate Xtreme Probe for Ferrous Metal Substrates (0-400 mils/10,000 um) is a simple and durable precision instrument that uses magnetic and eddy current principles to accurately measure coating thickness on both ferrous and non-ferrous metals. All Positector 6000 Coating Thickness Gauges are supplied complete with precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, wrist strap (built-in style only), nylon carrying case with shoulder strap, NIST Traceable Certificate of Calibration, two (2) year warranty.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-269

The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...