|
|
-
4.9 of 5.0 with 27 Reviews
SALE PRICE: $135.90 1% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
High precision Pin Gage (Plug Gage) sets at very economical prices. Offered in two grades of tolerance: Plus (+.0002 ) ). Fowler Pin Gage Sets come in a range of sizes. These accurate and well made precision tools are ideal for checking hole size, location, gage slots, distance between holes, go sizes etched on ranges over .061 Each gage checked against master gages traceable to the National Institute of Standards and Technology Gages are cylindrical, 2 in length and have no sharp corners Accurate to .0002 Gage increments are in .001 steps
-
4.9 of 5.0 with 25 Reviews
SALE PRICE: $136.99 1% OFF
Manufacturer: elecall
Brand: Elecall
Manufacturer: elecall
Brand: Elecall
EC771FN Professional Paint Coating Thickness Tester Meter Gauge Sensor Probe: F, No Fe Measuring Range: 0 to 1250 micrometer, 0 to 49.21milsAccuracy:1um/0.1milsGuaranteed Tolerance (of reading): 0~850um(±3%+2um); 850~1250um(±5%)Item Size: 100 x 52 x 29mm
-
4.9 of 5.0 with 3 Reviews
SALE PRICE: $137.00
Manufacturer: Starrett
Brand: Starrett
Model: 1263L
Manufacturer: Starrett
Brand: Starrett
Model: 1263L
|
The Starrett 1263 series stainless steel micrometer head has a vernier scale in inch units for taking precise measurements to 1â€, and is made of stainless steel with a satin rust- and glare-resistant finish. It also has a knurled ring-type lock nut to hold measurements in place. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001†or 0.0001†depending on the model. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.9 of 5.0 with 15 Reviews
SALE PRICE: $137.28
Manufacturer: Alvin
Brand: Alvin
Manufacturer: Alvin
Brand: Alvin
Rigid phenolic construction with a black satin finish. Mobile straightedge affords frictionless operation through the floating action of the nylon rollers mounted on the blade. The rollers retract at a touch, securing the blade for accurate drawing. Acrylic edges are elevated to prevent ink smears and steel ball-bearing pulleys provide smooth movement. Comes with all mounting hardware and installation instructions.
-
4.9 of 5.0 with 20 Reviews
SALE PRICE: $137.80 10% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 25-441/5J
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 25-441/5J
Color: White
The Starrett 25 Series Dial Indicator has a shockless, hardened steel gear train and jewel bearings, except where noted. It is furnished with a lug-on-center back. Anti¬magnetic mechanism is optional for all models.
-
4.9 of 5.0 with 3 Reviews
SALE PRICE: $138.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2514SB
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2514SB
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.9 of 5.0 with 16 Reviews
SALE PRICE: $140.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: T1463RL
Manufacturer: Starrett
Brand: Starrett
Model: T1463RL
|
The Starrett 1463 series stainless steel micrometer head has a vernier scale in inch units for taking precise measurements to 0.5â€, and is made of stainless steel with a satin rust- and glare-resistant finish. It also has a knurled ring-type lock nut to hold measurements in place. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001†or 0.0001†depending on the model. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
4.9 of 5.0 with 21 Reviews
SALE PRICE: $140.00 8% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 25-141J
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 25-141J
Color: White
These indicators have a shockless, hardened steel gear train and jewel bearings, except where noted. They are furnished with a lug-on-center back. Antimagnetic mechanism is optional. Special nonshock mechanism is available.
-
4.9 of 5.0 with 49 Reviews
SALE PRICE: $141.20 1% OFF
Manufacturer: L.S. Starrett
Brand: Starrett
Manufacturer: L.S. Starrett
Brand: Starrett
End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 550mm For Use With 575mm Micrometers, Includes Insulating Rubber Handle
-
4.9 of 5.0 with 28 Reviews
SALE PRICE: $142.50 1% OFF
Manufacturer: HHIP
Brand: TECLOCK
Model: 4409-0064
Manufacturer: HHIP
Brand: TECLOCK
Model: 4409-0064
Made in Japan by TECLOCK. ~ Measuring range is 35-60mm. ~ for closer tolerance measurements of holes, taper and roundness. ~ Easy setting with micrometers or ring gages. ~ Complete with measuring instructions and Certificate of Calibration. ~ Fitted wooden case with anvils index.
|
|