Dimensional Measurement - Page 402

Manufacturer: Flexbar Brand: Flexbar

for Checking Outside Diameters, Recess Diameters, etc. Spring loaded Arms and ceramic contact Points for accurate Measurements under constant pressure. Push-button to close Arms. Dial Reading .200" per revolution (2x.100"). Revolution counter. Spring loaded-constant Measuring pressure. Each Caliper has 1" movement. Can be Set With Micrometer or ring Gage. 2" Dial Face Diameter. Length of Arm is 3 1/4". Measuring Anvil length = 13/32". Measuring Anvil Thickness = 3/32". Can be Set With Gage Blocks or Micrometer Standards. includes fitted Case. Model No.18552, External Dial Caliper Gage,750"-1.750" Range.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-223

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 527-402

The Mitutoyo Series 527 Vernier Depth Gauges, Hook End Type, Metric, depending on the model, have a measurement range of 0 to 150mm, a resolution (or smallest graduation interval) of 0.05mm, with + or – 0.05mm of accuracy; 0 to 200mm, a resolution or 0.05mm, with + or – 0.05mm of accuracy; or a range of 0 to 300mm, a resolution of 0.05mm, with + or – 0.08mm of accuracy. The vernier scale provides precise measurements. The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurements. These gauges are made of hardened stainless steel and the bases of the units (100mm long) and measuring faces are hardened and lapped for accuracy. An optional wider extension base is sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: At-A-Glance Brand: At-A-Glance

Technical Specification Item Level Gauge Type Tank Tank Depth 24 Connection Size 2 NPT Calibration Unit Material Inner Glass, Outer Plastic Calibration Unit Increments 1/8s of a Tank Resolution 1/8 of a Tank Gasket Material Duro Nitrile Bushing Material 316 Stainless Assembly Nut Material Aluminum Rod Material 316 Stainless Rivet Material Stainless Steel Float Material Stainless Steel Float Dia. 1-3/8 Temp. Range -20 to 200 Degrees F Pressure Rating 70 PSI Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Starrett Brand: Starrett Model: 207Z

The Starrett 208 series can seam micrometer has a vernier scale in inch units for taking measurements of the width, height and depth of can seams. The micrometer is made of stainless steel for durability, with a satin chrome rust- and glare-resistant finish, and a knurled sleeve that helps provide a secure grip. The vernier scale on the thimble and sleeve is graduated to 0.001” for taking precise outside diameter (OD) measurements. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: V436.1MXRL-125

The Starrett 436.1 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 363L

The Starrett 363 series digital micrometer head has a mechanical digit counter in inch units for ease of reading to 0.001”, and a knurled ring-type lock nut to hold measurements in place. The micrometer is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The micrometer has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 112-155

The Mitutoyo 112 series point micrometer has a pointed spindle and blade anvil for measuring grooves and keyways, a vernier scale in metric units graduated to 0.01mm for taking precise outside diameter (OD) measurements and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The spindle and anvil are made of hardened steel for durability. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Flexbar Brand: Flexbar

for Checking Outside Diameters, Recess Diameters, etc. Spring loaded Arms and ceramic contact Points for accurate Measurements under constant pressure. Push-button to close Arms. Dial Reading .200" per revolution (2x.100"). Revolution counter. Spring loaded-constant Measuring pressure. Each Caliper has 1" movement. Can be Set With Micrometer or ring Gage. 2" Dial Face Diameter. Length of Arm is 3 1/4". Measuring Anvil length = 13/32". Measuring Anvil Thickness = 3/32". Can be Set With Gage Blocks or Micrometer Standards. includes fitted Case. Model No. 18553, External Dial Caliper Gage, 1.125"-2.125" Range.

Manufacturer: CME Brand: CME Tools

1.2" - 1.6" RANGE. SELF-CENTERING 3-POINT FOR ACCURATE MEASUREMENT OF INTERNAL DIAMETERS. HIGHLY DURABLE CARBIDE-TIPPED CONTACT POINT. MEASUREMENT CAN BE TAKEN CLOSER TO THE BOTTOM OF THE BLIND BORE., AND CAN BE TAKEN INTO A DEEP HOLE WITH AN EXTENSION. RATCHET STOP PROVIDES UNIFORM MEASURING PRESSURE AND ASSURES HIGHEST READING ACCURACY. SETTING RING ACCURACY WITHIN +/-0.00002". READING: 0.0002"