Dimensional Measurement - Page 658

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of 1 1/4-7 UNC thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: TruThread Brand: TruThread

Taperlock Double-End Thread Plug Gage Set for inspecting the pitch diameter and functional thread for internal threaded products. All gage sets include Go Member, NoGo Member and Handle marked with nominal size, class of fit and pitch diameters. All gage members are serialized and include a printed, 17025 Accredited Long Form Certificate.

Manufacturer: Bon Tool Brand: Stabila Model: 29148

STABILA's Type 80A-2 Measuring Stick Level. Installation spirit level with measuring scales marked for the rapid transfer of installation points. Removable end caps with anti-slip wall grips. Three measurement scales in both inch and metric. Straight edge for better markings. Slope indicator rings for level, 1/8" and 1/4" slope per foot. Double bridged frame fro increased strength as well as providing an uninterrupted surface for both drawing and scribing over the horizontal vial. Fast and accurate installations. One Horizontal (level) and two vertical (plumb) vials. Vials are guaranteed for life.

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of 1/2-28 UNEF thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: INSIZE Brand: INSIZE Model: 4121-5C1N

American standard thread ring gage, no go, 5/8-11unc.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-008-004-0 Color: Black

The Fowler One-Rev stainless steel dial caliper has dial graduations of 0.001" with 0.001" accuracy, a sliding jaw with a lock, and a covered rack. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step.The caliper measures 0.10" per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.10" graduations. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides alon...

Manufacturer: iGaging Brand: iGaging

This Digital Readout Kit can be adapted to a number of woodworking machines, including router lifts, router tables, planers and shapers. It has a remote display connected with a 50 Inch cord that can be disconnected for easy installation and access. The large, easy to read display reads in inches with fractions (1.64 Inch) or millimeters. Decimal inches are displayed in .001 increments and millimeters in .05mm increments. Fits router lifts made by Jessem, Jointech and others. The readout can be easily installed using magnets, double face tape, or screws. Vertical and horizontal slider mounting hardware is included. Packaged in a protective case with 3V CR2032 battery.

Manufacturer: SANDVIK Brand: Sandvik Coromant

YOU ARE PURCHASING THE 10PICTURED SANDVIK CARBIDE INSERTS.THEY ARENEW.THEY ARE LABELED:SANDVIK R331.1A - 08 45 30H - WL 10308N0471961I USUALLY SHIP (95%) OF MY LISTINGS SAME DAY IF PAID FOR BY 4:00 P.M. EST. PLEASE EMAIL ME OR CALL 937-475-3068 TO VERIFY I SEE YOUR PAYMENT IF YOU NEED YOUR ITEM SHIPPED SAME DAY.PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES!I WILL COMBINE SHIPPING.I WILL SHIP WORLDWIDE.THE FREE SHIPPING OFFER IS FOR UNITED STATES RESIDENTS ONLY.PLEASE SEE THE INTERNATIONAL SHIPPING COST POSTED IN THE LISTING IF YOU ARE AN INTERNATIONAL BUYER.THANK YOU!LOCATION =J2-46

Manufacturer: Cole Brand: Cole

Type: Beam Combiner Mateial: IIVI znse  Diameter: 25mm Thickness: 2mm Design Wavelengths: 10600nm Laser, 675 nm. It is used by placing it at 45 degrees to both beams - it transmits the co2 laser and reflects the red aiming laser, so they are both parallel to each other. 

Manufacturer: iGaging Brand: iGaging

Quality Professional Precision Tool Use this indicator to quickly center work pieces or fixtures on your mill. The measuring range is 0.25". The shank is 0.375" diameter and 0.75" long. The indicator is 5.5" long. Can measure internal diameters from 0.12" to 4.25" and external diameters from zero to 4.25". This set includes: Indicator body, restraining rod (prevents rotation), spring-loaded center point feeler, three straight feelers (for IDs), three curved feelers (for ODs). Features: For quick centering on milling and boring set-ups Includes 6 Feelers: 4", 8", 12" Straight 4", 8", 12" Curved 1/8" Feeler Ball Measuring Range: Internal: 5/32" - 4-1/4" External: 0 - 4-1/4" Locating Accuracy is 0.0005" of center Furnished in a fitted wood case Operates at any angle from horizontal to vertical without any change, and from internal to external by simply changing the feeler