Dimensional Measurement - Page 726

Manufacturer: MapTools Brand: Outdoor Sport

This tool is an improved version of the Graphic Training Aid 5-2-12 Coordinate Scale and Protractor used by United States and NATO military forces around the world. By using a slot on one side of the tool for access to the map, the tool can be more compact than the traditional GTA tool. The tool features several additional map scales, including 1:24,000, which is the most common topographic map scale found within the United States. The 1:100,000 scale now spans 5km grid lines, making it much more usable. Plus, he overall dimensions of the tool have been reduced so that it is the size of a music CD, easially fitting into a pocket or any slot where you could store a CD.Size = 4.75 Inches In DiameterScales Covered: * 1:24,000 x 1km * 1:25,000 x 1km/1:250,000 x 10km * 1:50,000 x 2km/1:500,000 x 20km * 1:10,000 x 500m/1:100,000 x 5km

Manufacturer: Harbor Freight Tools Brand: Harbor Freight Tools

Brand New

Manufacturer: ezMachineTools Brand: ezMachineTools

This 320 universal dial bevel protractor has a range of 0-320 degrees and reading value of 2".

Manufacturer: WOODSTOCK Brand: Woodstock Model: D4089

These precision squares are perfect for precision 90° layout and machine set-up. These squares are made from hardened, tempered and polished steel and have an inside notch for accuracy. The blade edges and beam faces are accurate to within ± 0.0006".

Manufacturer: Grand Index Brand: Grand Index

Applications Drainage angles and run-off slopes Tool setting on Lathes Setting blade angle of Circular Saws Setting blade angle of Miter Saws Setting work piece angle for milling Grader and tractor work alignment Platform monitoring Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table Features Small and portable design Fast and accurate measurement Degree and Percentage of slope in conversion Measuring range of 4 x 90 with ±0.1° repeatability Large and clear LCD display with 0.1° resolution Hold Measured data Calibrate button to calibrate the meter to any reference surface Three built-in magnets on the base can attach any magnetic surfaces The unit will directly enter the state of absolute angle measurement every time be turned on (No matter change the batteries) Absolute and relative measurement conversion Specifications Measuring Range: 4 x 90° Resolution: 0.1° Repeatability: ±0.1° Operating Temperature: 0 ~ 40°C Operating Humidity: 40 ~ 80% Power: 3 x 3V CR2032 Batteries (not included) Dimensions: approx. 51 (L) x 51 (W) x 27 (D) mm (2.01' x 2.01' x 1.06' inch) Weight: 122 g One Set Included 1 x Bevel box 1 x Instruction Manual Standard Factory Package

Manufacturer: Capri Tools Brand: Capri Tools Model: CP20002

Tool is perfect for the most accurate measurements up to 0.0005-inch (0.01 mm) with depth-measurement probe and precision ground jaws. The large convenient LCD readout allows you to keep track of your work and is easy to read. Handy device also features a convenient one-touch button for switching between inches, mm and inch-fractions. The LCD display's helpful vibrant flashes of a low battery warning indicates when you need to recharge. The display can also be zeroed at any point. Caliper's frame and hardened shaft are made from premium stainless steel to ensure durability. Designed with a thumb-roll mechanism and position lock, tool provides slip-resistant and precise adjustments. The caliper also has an on-off switch with auto-off. Product comes with a small screwdriver to remove the battery cover, as well as a custom-fitted storage case and extra battery.

Manufacturer: Affinity Tools Brand: Bora Model: 531120

What’s with the rare earth magnets? Strength… they’re up to 10 times more powerful than conventional magnets, but it’s hard to describe until you actually use one. And with grab-and-hold power like this, they provide an excellent way to move the ruler and “lock-Inch it in place without the need for a mechanical fastener. Just slide the ruler to the desired position and let go. The rare earth magnets made from an alloy including Neodymium iron are strong enough to hold the ruler securely in place. The ruler is made of stainless steel with permanently etched incremental measurements. The body of the square is cast zinc and milled on five sides for dead-on accuracy. And there’s a glass vial for checking level and plumb. Measure, square, level and plumb — that’s why you need the Bora Combination Square.

Manufacturer: Affinity Tools Brand: Bora Model: 531120

What’s with the rare earth magnets? Strength… they’re up to 10 times more powerful than conventional magnets, but it’s hard to describe until you actually use one. And with grab-and-hold power like this, they provide an excellent way to move the ruler and “lock-Inch it in place without the need for a mechanical fastener. Just slide the ruler to the desired position and let go. The rare earth magnets made from an alloy including Neodymium iron are strong enough to hold the ruler securely in place. The ruler is made of stainless steel with permanently etched incremental measurements. The body of the square is cast zinc and milled on five sides for dead-on accuracy. And there’s a glass vial for checking level and plumb. Measure, square, level and plumb — that’s why you need the Bora Combination Square.

Manufacturer: iGaging Brand: iGaging

Now you can set up your table saw blades, jointer fences and other machine tools where accuracy is a must for a fraction of the price! These all steel, precision squares are accurate to within 0.001" and come in 2", 4" and 6" lengths. All surfaces and edges are ground for straightness and parallelism so the squares are accurate on both inside and outside edges. There are no graduations on the blades. Comes in a wood storage case.

Manufacturer: Fowler Brand: Fowler & Nsk Model: 74-554-630

Xtra-Value External Electronic Caliper gage has direct inch/metric/fraction conversion. Robust housing Large LCD display Reading: .01"/.1mm/1/64ths Accuracy: .01"/.3mm/1/64ths Spring loaded with locking nut Battery is CR2032.Fred V Fowler 74-554-630 6" Outside Digital Caliper