Dimensional Measurement - Page 889

Manufacturer: Vermont Gage Brand: Vermont Gage Model: 951040500

Aluminum handles, light Blue (inch) yellow (metric), red collet for no go end, green collet for go end.

Manufacturer: GXG-1987 Brand: GXG-1987 Color: Orange

Feature: - Max flow rate:30L/Min - Self priming,RPM 8500 - 2mm thicker aluminum alloy shell - Stainless steel strainer at the bottom - Easy Electric clip connecting system - 9.8ft power cord with easy to use ON/OFF Switch - 3/4" hose tail connection for fast installation - Max pressure can reach 43psi. - Suitable for diesel,oil and water Specification: Voltage:DC 12V Power:60W Rev:8500r.p.m Flow rate:30 L/Min Max Pressure: 43 psi Pressure Head:9.8ft Cable Length:9.8ft Diameter of outlet:3/4" Motor Racing Current:0.3A The Diameter of the pump:50mm Material:Aluminum Color: Orange

Manufacturer: uxcell Brand: uxcell

The Micrometer measures the outside thickness or the diameter of small parts, great for machinists and jewelers for making precise measurements, can also to as a teaching aid tool in engineering and technical schools.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611165-531

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...

Manufacturer: ezMachineTools Brand: ezMachineTools

This thread gage is ANSI standard 2B Go/No Go type and has size of 6-32 UNC.

Manufacturer: Tajima Brand: Tajima Model: GP-30BW

â– 30 ft. x 1 inch wide steel tape with glare-free Hyper-Coat blade coating â– Tempered steel end hook secured by 4 independent rivets and steel back plate â– Crisp, clean 2-color scale imprinted over a white background â– Graduation in 16ths with stud and truss on-center designations â– Smooth, high tensile-strength return spring â– Thick elastomer cover wrapped around a heavy-gauge ABS casing â– Two-step tape lock, cushioned end hook return and 1 inch wide belt clip

Manufacturer: Carrera Precision Brand: Carrera Model: CP8806-T

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Use to calibrate measuring equipment. Use to pass/fail manufactured parts. Perfect for high volume inspection. Use these single tolerance, class X plug gages as reference standards (master gages) to calibrate comparators, micrometers, snap gages and other measuring equipment. Use to gage parts directly. Use these gages as direct measurement standards in inspecting manufactured parts. Faster set-up times - eliminate the need of wringing blocks together and calibrate by using the exact diameter you need. More accurate - use a master gage which is the same diameter as the work being measured and you eliminate lead error in your measuring equipment. Lapped to 2 microinch finish or better. Eliminate geometry error which is caused when calibrating with flat gage blocks.

Manufacturer: HHIP Brand: HHIP Model: 4101-1104

M4 X 0.7 H6 Go-Nogo Thread Plug Gage ~ Gages are "X" tolerance. ~ Most commonly used for general applications including bolts, nuts, screws and similar fasteners. ~ Comes with the handle. ~ Sold by the set.

Manufacturer: Mars International Brand: Mars

Mars International Metric Vernier Caliper Metal5"12.5cm Metric Vernier Caliper Dual 47