|
|
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $25.00 1% OFF
Manufacturer: Amico
Brand: Amico
Model: a12071000ux0072
Manufacturer: Amico
Brand: Amico
Model: a12071000ux0072
Radius gauges require a bright light behind the object to be measured. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction. It is a kind of observational measurement because of its visual test way. R15-25mm includes 16pcs at each end, radius as 15mm, 15.5mm, 16mm, 16.5mm, 17mm, 17.5mm, 18mm, 18.5mm, 19mm, 19.5mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm.
-
4.0 of 5.0 with 6 Reviews
SALE PRICE: $25.03
Manufacturer: AB Tools
Brand: A B Tools
Manufacturer: AB Tools
Brand: A B Tools
A very versatile and useful tool for automotive and engineering use. So many uses from checking for play and wear in components, setting TDC to turning and other engineering uses. This listing is for the dial gauge and for a magnetic stand. DIAL GAUGE Measuring range 010mm Reading 0.01mm 50mm Dial Face is clearly marked and easy to use. Can be mounted with a lug on the rear of the dial or by holding the stem as pictured. Metal casing. Locking screw. MAGNETIC BASE The heavy base is magnetic and holds the stand firmly (60kg pull). The magnet can be turned on or off to allow easy removal and accurate placement. 175mm total height. Fine adjustment cross arm. Fully adjustable design.
-
4.0 of 5.0 with 20 Reviews
SALE PRICE: $25.16 1% OFF
Manufacturer: Promold
Brand: pro mold
Model: PC1
Manufacturer: Promold
Brand: pro mold
Model: PC1
Invented by Pro-Mold in 1991 the mini-snap is a two piece snap design card holder that is ideal for inexpensive trading cards. These mini-snap was the first baseball card case to fit into the standard set storage boxes allowing you to keep complete sets in place with the most expensive cards being preserved in this holder. The mainstream collector's choice for hard plastic protection of collectible trading cards.Fits standard card sizes .185 by 2.66 by 3.65.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $25.20 1% OFF
Manufacturer: Moore and Wright
Brand: Moore & Wright
Model: 804
Manufacturer: Moore and Wright
Brand: Moore & Wright
Model: 804
All blades fixed in a steel sleeve Moore and Wright HistoryFounded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.
-
4.0 of 5.0 with 48 Reviews
SALE PRICE: $25.59 5% OFF
Manufacturer: Grand Index
Brand: Grand Index
Model: 5 pcs per lot Vernier Caliper
Color: White
Manufacturer: Grand Index
Brand: Grand Index
Model: 5 pcs per lot Vernier Caliper
Color: White
|
This Stainless Steel 2-in-1 Angle Meter & Ruler with moving blade can calculate internal and external angles and measures length quickly and accurately. A convenient stablelocking function can lock the measurement at any angle or position to transfer angle measurements The ruler's length is up to 400(40cm) with scales etched into the faces of the ruler and painted, rather than just surface painted to ensure they don't rub or scratch off easily, ensuring longevity in scale reading. It can rotate a full 360° without restriction and instantly measure angles accurately to within ±0.3° accuracy, so even obtuse angles can be calculated if required, an ideal tool for layout work, table-saw blades, jointer fence, trim installation etc. The flat and straight edges of the ruler are perfect for marking accurate lines with a marker or pencil. Use it as an Angle ruler, Straight ruler or Square Ruler. Especially useful for marking out mortise and tenon joints, stopped dadoes or any other cuts involving dual measurement on two 90° edges. Specification: Measurement Range: 0~999.9° (More than 999.9° incorrect display) Min. Div: 0.1° Accuracy: ±0.3° Ruler measurement range:200mm(7 inches) each arm/blade Working current:< 50 μA(More than 5000 hours in continuous use) Operation temperature: 0 - 50°C (32~122°F) Operation humidity: 0 - 85%RH Power required:3V CR2032 BUTTON Battery(not included) Size :400 x 35 x 20mm Weight:162g ±1.5g Zero Setting function Automatically shut off function in 6 min Useful to applications such as automobile, tools, constructions, boating, woodworking and machining
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $25.82
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 959149
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 959149
|
The Mitutoyo 959149 Digimatic SPC connecting cable outputs data from Digimatic gauges that have data output capability to a Digimatic mini-processor, display unit, multiplexer, or similar device. The cable has a data out switch type and is compatible with Digimatic instruments with an output feature, including all Digimatic calipers with an Absolute encoder, 570-2XX series height gauges, 571-2XX series depth gauges, and 572-XXX series scale units. The cable is 40" long.Compatible Mitutoyo DevicesCalipersAll Digimatic calipers with an Absolute encoderHeight gauges570-2XX seriesDepth gauges571-2XX seriesScale units572-XXX seriesCalipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $25.89 4% OFF
Manufacturer: easybuycn
Model: easybuy
Manufacturer: easybuycn
Model: easybuy
You can instantly measure angles within a 360° range, making it useful for layout work, machine set-up (table-saw blades, jointer fence etc) and trim installation. The flat and straight edges of the meter are perfect for marking accurate lines with a marker or pencil. It could be well used into various fields besides of Angle ruler, Straight ruler and Square Ruler. Measuring Range (Angle): 000.0 ~ 999.9° (More than 999.9° incorrect display) Resolution: 0.1° Accuracy: 0.3° Working Temperature: 5 °C~ 50 °C (41 ~ 122 °F) Working Humidity: ≤85 % R.H. Working Current: ≤30 µA (More than 5000 hours in continuous use) Power: 1 x CR2032 3V Lithium Battery (Included) Item Size: approx. 278 (L) x103 (W) x 30(D) mm Item Weight: approx. 245 g (8.64 oz) 1 x Digital Angle Meter with Ruler (360°) 1 x Instruction Sheet
-
4.0 of 5.0 with 7 Reviews
SALE PRICE: $25.90 1% OFF
Manufacturer: Generic
Brand: Generic
Model: QY-US4-160215-1642
Manufacturer: Generic
Brand: Generic
Model: QY-US4-160215-1642
!!!!!----NOTE----!!!!! And if any questions, please contact us first before using A---/to--/-Z or neg-a-t-iv-efee-db-a-c-k or char-g-e-ba-ck or other Ama-zo-n Procedure which will give us lots of troubles Classic tool for measuring outside dimensions, copy-making, fabrication Heavy-duty hardened & tempered 12 gauge carbon steel Fine-threaded screw for precise fit; knurled adjustment knob Bow spring maintains consistent tension Range 0" to 7"; length overall 7"
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $25.95
Manufacturer: Johnson Level & Tool
Brand: Johnson Level & Tool
Model: 3836
Manufacturer: Johnson Level & Tool
Brand: Johnson Level & Tool
Model: 3836
Extruded aluminum I-beam with black anodized finish. Computer machined level edge with strong, full-length magnetic strip. 360-degree reading acrylic yellow barrel vials. Screw-on, high-impact resistant plastic covers with protective lenses. Large, patented, magnified top-read window. Shock-protecting end caps. Frame dimensions: 1-inch x 2-1/4-inches.
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $25.95 39% OFF
Manufacturer: iGaging
Brand: iGaging
Model: 35-OD6-H
Manufacturer: iGaging
Brand: iGaging
Model: 35-OD6-H
Professional Grade Precision Tool Make quick, accurate outside measurements with these high quality digital calipers. The large LCD display makes reading a breeze, and the readings can be set for inch, metric or fractional measurements. Important and convenient Hold function. Perfect for woodworking, carpentry, metal fabrication, etc. Features: Large LCD display Spring-Loaded travel Alloy Jaws, Chrome finish Inch, Metric and Fractional Readings, Hold Function Measure up to 6" Accuracy 0.01"
|
|