Dimensional Measurement - Page 1125

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 504-201-151

Mitutoyo Dial Snap Gage, Range: 0 - 1", Gage Stem Dia.: 3/8", Comment: Without Indicator

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: GLBR5000-4

This Dixon Valve GLBR5000-4 pressure gauge has a 1/2" National Pipe Taper (NPT) male threaded lower mount, a 4" display face and a chrome/brass case with an acrylic crystal, and measures pressure from 0 to 5,000 pounds per square inch (psi). The liquid-filled gauge displays 50 psi increments on a white dial face with a black aluminum pointer and has ASME B40.1, Grade 1A accuracy (plus or minus 1 percent of span). Pressure is measured using a copper alloy bourdon tube, and the gauge has a brass movement with polished bearing surfaces for extended wear. This pressure gauge has an operating temperature range of -4 to +140 degrees F and is suitable for use in a variety of applications, such as measuring gas or liquid pressure in petrochemical and chemical manufacturing.SpecificationsGauge typePressure gauge, 0 to 5,000 psi, 50 psi increments, liquid-filledEnclosure4" display, chrome/brass case, acrylic crystalAccuracyPlus or minus 1 percent of span, ASME B40.1, Grade 1AConnectionLower mount, 1/2" NPT maleOperating temperature range-4 to +140 degrees FPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference, such as to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. A pressure gauge can also measure differential pressure, which is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 3415S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-406

Mitutoyo Horizontal Test Indicator, Graduations: .0005"/0.01mm, Range: .030"/0.7mm, Dial Face: 0-15-0/0-35-0, Includes: Test indicator, .079" carbide contact point, 3/8" stem, clamp nut.

Manufacturer: Starrett Brand: Starrett Model: 226RL-2

The Starrett 226 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 128-103

The Mitutoyo Series 128 Vernier Depth Gauge, Micrometer Type, Metric, have a measurement range of 0 to 25mm, a resolution (or smallest graduation interval) of 0.01mm, with + or – 0.003mm of accuracy. The vernier scale provides precise measurements. These gauges include a 4mm diameter measuring rod for flexibility in measuring range. The units have a ratchet stop for uniform pressure and a measuring rod clamp for stability. They have a satin chrome finish on the thimble for readability. They are available with a base either 63.6mm or 101.6mm long. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 2113-25E

No Auto power off electronic indicator, 1"/25.4mm, resolution 0005" 0/01mm.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Mahr Federal Brand: Mahr Federal Model: B8I

Mahr Federal AGD 1, Dial Indicator 0.250" RANGE X .001", B8I, Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to .250", graduations of 0.001", an accuracy of ±0.001", and a range per revolution of 0.100". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is balanced with a reading of 0-50-0, for comparative readings.

Manufacturer: ABS Import Tools Brand: HHIP