|
|
-
3.8 of 5.0 with 1 Reviews
SALE PRICE: $433.99 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
|
The Starrett 3751AZ-6/150 is an electronic height gauge with fine adjustment thumb roll, slide lock, a steel scriber, a hardened stainless steel bar, a measurement range of 0 to 6" (150mm), and a high-contrast LCD digital readout precise to 0.0005" (0.01mm) with + or - 0.001" (0.03mm) of accuracy. The LCD characters are 0.32" high for ease of reading. A fine adjustment thumb roll provides precision measurements. A lock holds the slide in position. The included scriber, used to mark position on the workpiece, is steel for hardness and durability. The round nose of the scriber cuts clean, sharp lines with smoothness and less pressure and can reference zero from the bottom of the base to get the full usable range. The gauge provides the ability to set a temporary zero position and return to a true zero reading. The bar is hardened, stainless steel for durability and is back from the edge of the nose for stability. The base is hardened, ground, and lapped with finger grooves for a comfortable hand grip and ease of movement. The gauge is powered by one 3V CR 2032 battery (included). An auto power-off feature turns the gauge off after 5 minutes of inactivity to extend battery life. The gauge can measure depth of holes, slots, and recesses with the PT08680A depth attachment (sold separately). The gauge comes with the scriber, battery, and an aluminum case.
-
3.8 of 5.0 with 37 Reviews
SALE PRICE: $444.00
Manufacturer: POSITAL-FRABA
Brand: POSITAL-FRABA
Manufacturer: POSITAL-FRABA
Brand: POSITAL-FRABA
ACCELENS (Compact Size) Inclinometer CANopen Interface Dual Axis +/-80°
-
3.8 of 5.0 with 3 Reviews
SALE PRICE: $445.00
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: PRBFT-D
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: PRBFT-D
Defelsko removable built-in probe. Heavy-duty, gold-plated locking connector for industrial environments. Certificate of Calibration Long Form). Traceable to NIST included with every probe. Each probe retains its own unique calibration information allowing full probe interchangeability). For ferrous metals steel and cast iron). Ideal for thick protective coatings such as epoxy, rubber, concrete liners, in tumescent fireproofing and more. Ideal for one-handed operation. Accuracy: + 0.5 mil + 3 percent) greater than 100 mils.
-
3.8 of 5.0 with 37 Reviews
SALE PRICE: $445.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-341B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-341B
.5 In/12.7mm, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Calculation Type.
-
3.8 of 5.0 with 22 Reviews
SALE PRICE: $445.17 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
1/4" diameter, 5.00 MHz Coating Probe For use with TI-CMX, TI-CMXDL and TI-CMXDLP
-
3.8 of 5.0 with 33 Reviews
SALE PRICE: $448.97 11% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-263
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-263
|
The Mitutoyo 543-263 IDC Digimatic indicator gauge measures to 0.5†(12.77 mm), has an LCD digital readout with resolution to 0.0001†(0.001 mm), and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). The gauge is accurate to + or - 0.00012†(0.003 mm), and supports a measuring force of 1.5 newtons or less. The unit runs on, and includes, one SR44 battery. This indicator gauge has an electronic microprocessor that samples at 50 times per second, and can preset a reference height at any position, set a temporary zero position and return to a true zero reading, switch counting direction, set upper and lower tolerance bounds, and automatically store and hold display of maximum, minimum, and runout (maximum minus minimum) readings. The LCD display also indicates in- or out-of-tolerance (GO/±NG) measurements when bounds are set. The LCD digital readout can display measurements in inches or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable for SPC (sold separately). An electrostatic capacitance linear encoder helps prevent overspeed errors which help ensure repeatable, precise measurement. A lug on the back of the gauge supports mounting onto a gauge stand. The gauge’s stem diameter is 3/8â€, with threads conforming to #4-48 UNF of the Unified Thread Standard (UTS). The gauge conforms to the American National Standards Institute/American Gage Design (ANSI/AGD) standard. Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure t...
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $449.98
Manufacturer: M&A INSTRUMENTS INC
Brand: M&A INSTRUMENTS INC
Model: RUIYAN RY-LS300D
Manufacturer: M&A INSTRUMENTS INC
Brand: M&A INSTRUMENTS INC
Model: RUIYAN RY-LS300D
|
Introduction: RY-LS300 optical light source can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm red source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer needs.Together with the RY-PM-300 optical power meter,it is a perfect solution for the fiber optic network characterization Features:•Provides 1~4 output wavelengths which can be optional according to customers needs •CW,2Hz modulation output at 650nm,and CW, 270Hz,1KHz,2KHz modulation output at other wavelengths •High stability of the output power •Stable output wavelength •Backlight LCD display supports night operation •Compact size and decent appearance •Large LCD,easy operation Applications:•Maintenance in Telecom •Maintenance CATV •Test Lab of optical fibers •Other Fiber Optic Measurements Specifications:•Type:LS300D •Wavelengths(nm):1300/1310/1550nm •Emitter Type:FP-LD,LED or others please specify •Output Power(dBm):-6~-7(1310/1550nm),>0 (650nm) •Output Stability:+0.05dB/15mins; +0.1dB/ 8hours •Modulation Frequencies:CW/ 2(650nm)/270,1K,2K(1310nm/1550nm) •Optical Connector:FC/PC ( Interchangeable FC/SC/ST connectors can be optional) •Power Supply:Alkaline Battery(3 AA 1.5V batteries) •Battery Operating Time(hour):45 •Operating Temperature(oC): -10~+60 •Storage Temperature(oC):-25~+70 •Dimension(mm):172*82*33 Recommendation:RY-LS300 Handheld Light Source is designed for optimal use with RY-PM300 Optical Power Meter for measuring optical loss on both sigle mode and multimode fiber cable
-
3.8 of 5.0 with 30 Reviews
SALE PRICE: $450.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
|
Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20324, 3-Point Bore Gage Heads, Head Size 3.150-3.543"
-
3.8 of 5.0 with 21 Reviews
SALE PRICE: $450.80
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
Materials used: steels, glass, thin plastics. Range in steel: 3/16" (.040" -6.0"), 1/4" (.040" - 6.0"), 1/2" (.050" - 19.99"). Wearface diamenter: 1/4", 3/8" or 5/8". Crystal diameter: 3/16", 1/4" or 1/2" 1/2" diameter, 5.00 MHz dual element transducer for TI-25M/DL/MMX Alpha-Hi Damped High Temperature (650 °F/350 °C), potted cable, top in
-
3.8 of 5.0 with 24 Reviews
SALE PRICE: $454.00 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
The J50RS Running Diameter/Thickness Gauge with Flanges, Range 0.005 mm - 5.00 mm is a precision instrument that features ball bearing mounted cylindrical rollers, in lieu of flat anvil surfaces, which makes this dial micrometers ideal for measuring the diameter or thickness of slowly moving wire, filaments, foil, ribbon, narrow fabrics, etc. without stopping the manufacturing process.
Viewing Page 1216 of 1520
|
|