Dimensional Measurement - Page 1295

Manufacturer: HHIP Brand: HHIP Model: 4103-0183

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0125

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: EK Brand: EK

*Classic measuring tool in hard-to-find 5" size *Stainless steel, dual-jaw for inside & outside measurement plus depth probe *Scale marked in inches by 1/16", metric by 1mm *Knurled thumb roller, position lock screw *Maximum reading 5"/12.5cm; length overall 7-1/2"

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go (+) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of +.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Kangnice Brand: Kangnice Model: KN038

Material: Stainless Steel Color: as shown in pic Features: Used to draw radial lines, setting bevels and transferring angles Made of polished stainless steel Double graduation from 0-180 degree Brass locking nut Size: Approx. 198x53x14mm/ 7.80x2.09x0.55" Quantity:1Pc Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Stainless Steel Protractor

Manufacturer: EISCO Brand: EISCO

EISCO Vernier Caliper, 0-12cm x 0.1mm Plated steel caliper for measuring inside, outside, or depth. Dual scale: 0-12cm x 0.1mm | 0-5" x 1/16". Thumb wheel provided for easy motion of jaws.

Manufacturer: Amico Brand: Amico

Gray Metal 8cm Length 32 Plates R7-14.5mm Radius Gauge Measuring Tool

Manufacturer: IRWIN Brand: Irwin Tools Model: 1794462 Color: Silver

This professional tool has permanent deep stampings that are durable. The steel body is rust-proof and weather-resistant. The square has multiple scales: 1/8-, 1/10-, 1/12-, and 1/16-inch. Features rafter tables, brace and octagon scales and Essex board measure. IRWIN Tools Carpenter Square, Steel, 8-Inch by 12-Inch (1794462)

Manufacturer: Seco-Larm Brand: Seco-Larm Model: ODC-59A

Features. For NONC circuits three wires. Overhead door surface mount.. Gold and deactivated rhodium plating for longer life and reliability.. Switch contained in curved low-profile cast-aluminum housing.. Magnet in gray ABS plastic case mounted on L-shaped bracket.. 24 in. 61 cm Wire leads enclosed in stainless-steel cable.. 2.75 in. 70 mm Gap.. Switch dimensions 4-38 in. x1.75 in. x716 in.