Dimensional Measurement - Page 306

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-340

The Mitutoyo 293 series Coolant Proof LCD micrometer with a 0 to 1"/0 to 25.4 mm measuring range has a digital single-value LCD readout that displays in inch and metric units with a 0.00005" (0.001 mm) resolution, a 0.00005" accuracy, and a ratchet stop thimble. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators.The micrometer's electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing is Ingress Protection certified IP65, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces that are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation...

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. •Model AR •Type: A (2 round buttons top and bottom) •Frame No. 7 •Range: 3 - 3 3/4 Model No. 11-2007, Flexbar Snap Gage

Manufacturer: Fowler Brand: Fowler

Features 60 pointed spindle with blade anvil for grooves and hard to reach dimensions Protected to IP54 specifications Large LCD display, 8.5mm Automatic switch off Hardened steel measuring face Absolute /25mm include standard

Manufacturer: INSIZE Brand: INSIZE Model: 3241-B4

Depth micrometer, 0-4", graduation 001 inch base 2.480×.669".

Manufacturer: INSIZE Brand: INSIZE Model: 2386-006A

Large range dial Test indicator, 06 inch graduation 0005 inch.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 700-118-20CAL

The calibrated Mitutoyo 700-118-20CAL Quick Mini digital thickness gauge is for measuring the thickness of small, thin, or fine objects such as jewels, paper, leather, and wire. This gauge has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.001". The LCD screen displays in inches or metric units. This model is lightweight (70g) and compact (72.3mm long). Functions include origin setting and zero setting. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This gauge has a measuring force of 2.0 Newtons (N) or less. It has a battery life of approximately 2 years under normal use. This unit comes with an SR-44 battery and fitted, plastic case.SpecificationsAnvil/spindle typeFlat spindle and anvilRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or - 0.001"FaceLCD displays in both inches and metric unitsMeasuring forceLess than 2.0NWeight70gDimensions44.8 x 72.3 x 20mm (H x W x D)Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL. What's in the Box?Mitutoyo 700-118-20CAL thickness gaugeSR-44 batteryPlastic caseCertificate of Calibration

Manufacturer: Fowler Brand: Fowler

Includes case Fowler's Dial Thickness Gages are light in weight, easy to handle and carry. These specially built gages are mounted in a hand contoured frame with a thumb release mechanism; has fast direct reading to .001". Used to measure thickness of paper, cellophane, plastic film and metal plates. These are high quality precision instruments. Features Case finished in dull plated chrome. 52-550-020 measuring face constructed in high grade tool steel; hardened, ground and lapped. Direct reading 0-100 (with revolution counter) on easy-to-read dial Frame is hammertone baked enamel Microfine graduations for .001" or .01mm minimum reading Spindle of hardened stainless steel Features a thumb release mechanism

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-620-717-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Spectra Precision Lasers / Trimble Brand: Spectra Precision Lasers / Trimble Model: LP20

Part #LP20 - Two Beam Laser Pointer. Self-leveling mechanism which automatically levels the beam before you reach the top step of the ladder

Manufacturer: Starrett Brand: Starrett Model: 2000SCM

Starrett 2000SCM 6-foot smartcable connects the Starrett 2000-24 height gauge to a Starrett 7612 or 7613 4-port gauge multiplexer. The smartcable has a ten-pin connector and a Starrett 2000 series connector. The ten-pin connector on one end connects to the gauge multiplexer (also known as a mux), which connects multiple gauges to a computer for data input; the Starrett 2000 series connector on the other end connects to the Starrett 2000-24 height gauge. The Starrett 2000SCM smartcable is an accessory for use with the Starrett 2000-24 height gauge, which is an electronic, digital measuring device.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.