|
|
-
4.7 of 5.0 with 32 Reviews
SALE PRICE: $174.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Electronic Point Micrometer. Quality Electronic Digital Readout Micrometer Provides Error-Free Readings To .00005"/.001mm Features: Large LCD display, High contrast. Resolution: .00005"/.001mm. Friction stop and locking Lever. Accuracy: .00015". Carbide Tips on Anvil and spindle. Zero-Set key allows comparative Measurements. Anvil Diameter: .256". RS-232 SPC Output. Function Key. Heat insulated frame cover Uses 1 SR44 Battery. Available in Ranges up to 2"/50mm. for Measurement of small Grooves, keyways & other Hard to reach Measurements. 30 Degree Points. Points are Carbide Tipped. Resolution: .00005"/.001mm. includes fitted Case. Model No. 15756, 0-1" (0-25mm) Electronic Point Micrometer
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $176.78 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-832
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-832
|
The Mitutoyo 293-832 Digimatic MDC-MX digital micrometer is for taking outside diameter measurements. The micrometer has a measurement range of 0 to 1.0" (0 to 25.4mm), resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0001" (0.002mm). The LCD screen displays in inches and metric units. This micrometer has a friction thimble to help provide uniform pressure for precise, repeatable measurements. The measuring faces are flat and are carbide-tipped for durability. This unit turns off after 20 minutes of idle time and can be turned on by twisting the spindle for convenience.Additional functions offered by this micrometer include zero setting and alarms for low voltage and counting value composition errors. The measuring force is 5 to 10 Newtons (N). It has a battery life of approximately 1.2 years of normal use. This unit comes with a SR-44 battery and fitted, plastic case.SpecificationsDisplay typeLCD displays in both inches and metric unitsAnvil/spindle styleFlat, carbide tippedRange0 to 1.0" (0 to 25.4mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.0001" (0.002mm)Measuring force5 to 10NThimble styleFriction thimbleData outputNoDimensions143.2mm length and 25mm throat depthWeight275gPower sourceSR-44 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1...
-
4.7 of 5.0 with 49 Reviews
SALE PRICE: $176.98
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-585-250-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-585-250-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.7 of 5.0 with 29 Reviews
SALE PRICE: $177.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-782B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-782B
.5 In/12.7mm, .0005 In/0.01mm, ID-S ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, ISO.
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $178.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: V436.1MXRL-50
Manufacturer: Starrett
Brand: Starrett
Model: V436.1MXRL-50
|
The Starrett 436.1 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
4.7 of 5.0 with 12 Reviews
SALE PRICE: $179.30 23% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Package Includes: Fowler Electronic Micrometer Carrying Case Appropriate setting ring Features Measuring jaws and faces fully hardened and microlapped for accuracy Water Resistant to IP54 specifications. True inch/metric conversion. Friction thimble Large easy-to-read LCD display Direct RS232 output Resolution: .00005 /.001mm Accuracy: 0.00020 /.005
-
4.7 of 5.0 with 17 Reviews
SALE PRICE: $179.99 1% OFF
Manufacturer: ASIMETO
Brand: ASIMETO
Model: 242-12-1
Manufacturer: ASIMETO
Brand: ASIMETO
Model: 242-12-1
Interchangeable Rod Type, 2" ~ 12" Rod Type Inside Micrometer Set, ASIMETO
-
4.7 of 5.0 with 41 Reviews
SALE PRICE: $182.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 78/782G
Manufacturer: Starrett
Brand: Starrett
Model: 78/782G
The Starrett Internal Extensions for 78 Series Internal Micrometers includes 3/8-1/2-Inch (10-12.5mm) sizes, 3-Inch extension size, and fits models 80XT/781XT375-500.
-
4.7 of 5.0 with 38 Reviews
SALE PRICE: $182.69 1% OFF
Manufacturer: ASIMETO
Brand: ASIMETO
Model: 504-81-1
Manufacturer: ASIMETO
Brand: ASIMETO
Model: 504-81-1
Assorted Measuring, Extended Range Dial Test Indicator, ASIMETO, Description Dial Test
-
4.7 of 5.0 with 55 Reviews
SALE PRICE: $183.00 30% OFF
Manufacturer: Stabila
Brand: Stabila
Model: 37532
Color: Yellow
Manufacturer: Stabila
Brand: Stabila
Model: 37532
Color: Yellow
|
This item is Stabila 37532 Jamber 78-Inch and 32-Inch Aluminum Box Beam Level Set . Used for Test & Measurement, Levels. The produt is manufactured in Germany. It’s tempting to try it, but door jambs aren’t always rigid enough top to bottom for plumbing with a standard short level. And, longer levels are too long for leveling sills. Here’s an affordable way to get both levels with one easy purchase. Great for installing doors, headers, sills and thresholds, this level set includes Stabila’s 196 series 78-inch level is ideal for installing door frames, and a 32-inch level for installing headers, sills, and thresholds. Both levels feature a wide-profile design for optimal jobsite durability. With certified accuracy, the levels have both top and bottom readings and sport a new oversized, rubber hand grip design. Rubber pad end caps and wall grips are functional yet removable for flush leveling. Light and strong, these levels are easy to wield yet plenty durable. Clear vials with spring steel hairline indicators mean easy reading. The purchase is covered by a Stabila lifetime warranty. --Brian D. Olson
|
|